M2701 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Page 1 of 6 May 29, 2022 | Rev (e) | Doc: DS_M2701 Series M2701 SERIES 3-PHASE AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M2701 SERIES 3-PHASE AC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- 3-PHASE AC/DC POWER SUPPLY
- HIGH EFFICIENCY
- HIGH VOLTAGE
- SINGLE OUTPUT
- UP TO 500 W
Page 2 of 6 May 29, 2022 | Rev (e) | Doc: DS_M2701 Series M2701 SERIES 3-PHASE AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military (ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features
- Miniature size
- High efficiency
- Wide input range
- Input / Output Isolation
- Inrush Current Limiter
- Fixed switching freq. (250 kHz)
- External Inhibit
- EMI filters included
- Non-latching automatic recovery protections: o Short-circuit o Over-temperature Electrical Specifications AC Input
115 VRMS, L-N 10%, 400 Hz
Voltage range: 100 to 320 VDC Abnormal surge (no damage) IAW MIL-STD-704A-F: 3-Phase Current range: 0 to 5 A 0 V to 180V Power range: 0 to 500 W Efficiency Output voltage regulation Ripple & Noise Typically: 90% (270VDC output, full load, nominal input voltage, room temperature) Less than ±1% (No load to full load, –55C to +85C and over normal input voltage range). Less than 100mVp-p, typical (max. 1%) without external capacitance. When connected to the system capacitance ripple drops significantly. Isolation – Low voltage version Isolation – High voltage version EMC Input to Output: 500 VDC Input to Output: 1 000 VDC Designed to meet MIL-STD- 461F Input to Case: 500 VDC Input to Case: 200 VDC CE102, CS101, CS114, CS115, Output to Case: 500 VDC Output to Case: 1 000 VDC CS116, RE102, RS101, RS103. Transient over-and- undershoot Output resistance at load change of 50% to 100% is 1.5 Ω, typical.
Page 3 of 6 May 29, 2022 | Rev (e) | Doc: DS_M2701 Series M2701 SERIES 3-PHASE AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Protections * Input
- Inrush Current Limiter Peak value of 5x IIN for inrush current lasting over 50µsec. Output
- Passive Over-Voltage Protection Transorb assembled across the output pins, selected at 120% ± 10% of nominal voltage. General
- Over Temperature Protection Unit shuts down if baseplate temperature rises above +105C ± 5C.
- Current Limiting Continuous protection (10- 30% above maximum current) for unlimited time (Hiccup). Automatic recovery when baseplate temperature falls below +95C ± 5C. Environmental Conditions Designed to meet MIL-STD-810G Temperature Operating: –55 C to +85 C (at baseplate) Storage:–55 C to +125C Altitude Method 500.4 Procedures I & II – Up to 33 kft. Higher altitude option. Salt Fog Method 509.4 Humidity Vibration (random) Shock Method 507.4 Method 514.5 Method 516.5 Procedure I Category 4 - General minimum Procedure I Up to 95% RH integrity exposure 20 g, 11 ms terminal peak saw- IAW Figure 514.5C-17 tooth, 1 hour per axis. Reliability 150 000 hours, calculated IAW MIL-HDBK-217F Notice 2 at +85 C baseplate, Ground Fixed environment. Notes: * Thresholds and protections can be modified / removed – please consult factory.
Page 4 of 6 May 29, 2022 | Rev (e) | Doc: DS_M2701 Series M2701 SERIES 3-PHASE AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment † J1 - Input Connector Type: M24308/24-38F or eq. Mates with: M24308/2-2F or eq. Pin No. Function Pin No. Function Pin No. Function
1 PHASE A
6 N.C. 11 PHASE B
3 PHASE B
8 CHASSIS
13 PHASE C
4 N.C. 9 PHASE A 14 N.C.
5 PHASE C
10 N.C. 15 N.C. J2 - Output Connector Type: M24308/23-38F or eq. Mates with: M24308/4-2F or eq. Pin No. Function Pin No. Function Pin No. Function 1 BIT 6 N.C. 11 OUT 2 N.C. 7 OUT RTN
12 OUT
3 INHBIT 8 OUT RTN 13 N.C.
4 OUT
9 BIT RTN 14 OUT RTN
5 OUT
10 N.C. 15 OUT RTN † All pins with identical function/designation should be connected for best performance
Page 5 of 6 May 29, 2022 | Rev (e) | Doc: DS_M2701 Series M2701 SERIES 3-PHASE AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Functions and Signals INHIBIT (connector J2, pin 3) The INHIBIT signal is used to turn the power supply ON and OFF. “1” or OPEN – Power supply active (output turned on). “0” or SHORT to OUT RTN – Power supply inhibited (output turned off). If this function is not required, leave this pin unconnected. BIT (connector J2, pin 1) The BIT signal indicates the status of the output voltage. When output voltage rises above 90% ± 5% of its nominal value, pin 1 will be pulled down to pin 9 through a 20 Ω ± 1% resistor and a phototransistor. When output voltage falls below 90% ± 5% of its nominal value, pin 1 will be in high impedance mode. If not used, leave this pin open. This signal is referenced to BIT RTN pin (connector J2, pin 9) Absolute maximum voltage between BIT and BIT RTN: 52 VDC Absolute maximum current into BIT pin: 2 mA (connect external voltage to this pin via an external resistor) Both pins 1 and 9 are isolated from all other parts of the circuitry. CHASSIS (connector J1, pin 8) The CHASSIS pin allows additional connection of unit's chassis to the system ground. Typical Connection Diagram Auxiliary Voltage 3.3 to 48VDC Outline Drawing M2701 Chassis Inhibit
Page 6 of 6 May 29, 2022 | Rev (e) | Doc: DS_M2701 Series M2701 SERIES 3-PHASE AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Notes 1. Dimensions are in inches [mm] 2. Tolerance is: .XX 0.02 in .XXX 0.010 in 3. Weight: approx. 900 gr Note: Specifications are subject to change without prior notice by the manufacturer