M1987 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
Page 1 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M1987 SERIES SINGLE-OUTPUT, 300W FILTER Intended for use with Single-Phase PFC AC/DC power supply M1982. The M1987 is a series of mechanically robust, base plate cooled, high performance, 300W input filter, for Navy shipboard applications. The M1987 has input per MIL-STD-1399-300B. The product meet MIL-STD requirements (specified herein)
Page 2 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Standard Models List (for other voltages – consult factory) Part number Input Output Voltage range Voltage Current M1987-100 90 to 150 VAC 90 to 150 VAC 5 A
- Additional standard configurations available. Contact factory for more details. All of our products can be configured to comply with EU REACH regulations. Contact factory for
Page 3 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in THE MAIN FEATURES OF THE M1987 ARE: ➢ UP to 300W ➢ Miniature size ➢ Wide input range ➢ Improve 1399-300B performance
Page 4 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in SPECIFICATIONS: AC Input Voltage Range 85 to 265 VAC ; 50/60Hz Single-phase, 5A max Isolation AC Input to Chassis: 1000 VDC AC Output Rating Following input
Page 5 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Specifications (Cont.): Environment Designed to meet MIL- STD-810F Temperature Methods 501.4 & 502.4 Operating: –40C to +85C (at baseplate) Storage: –55C to +125C (ambient) Humidity Method 507.4 Up to 95% RH Salt-fog Method 509.4 Altitude Method 500.4 Procedures I – Storage/Air transport: up to 70,000 ft. (non-operational) Procedure II – Operation/Air Carriage: up to 40,000 ft. (operational) Mechanical Shock Method 516.5 Procedure I 20 g / 11 ms terminal peak sawtooth shock pulse Vibration Method 514.5 Procedure I, Category 24 General minimum integrity exposure IAW Figure 514.5C-17 1 hour per axis. Fungus Method 509.4 EMI MIL-STD-461F* CE101, CE102, CS101, CS114, CS115, CS116, RE101, RE102, RS101, RS103 * When tested with M1982 at full load and in accordance with the provisions of MIL-STD-461F– with shielded Output and Signals cables. Reliability 2M hours, calculated IAW MIL-HDBK-217F Notice 2 at +85°C baseplate, Ground fixed conditions. Cooling Requirements The M1987 is a baseplate cooled unit. The base of the M1987 should be thermally attached to a suitable heatsink that maintains it below +85 °C. Form factor 3.965'' wide, 1.34'' high and 4.179'' deep. For detailed dimensions and tolerances see Drawing: M1987001 Weight 380gram Typical Connectors See Page 6
Page 6 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in TYPICAL CONNECTION DIAGRAM M1982 M1987 Phase Netural Phase Netural Inhibit External Sync Signal Return Sync Chassis Output RTN Sense Load
Page 7 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in PIN ASSIGNMENT: Input Connector Connector type: M24308/24-37F, OR EQ Output Connector Connector type: M24308/23-55F, OR EQ Note: All pins with identical function/designation should be connected together for optimal performance. CHASSIS Note: The CHASSIS pin allows additional connection of unit's chassis to system ground. Pin No. Description 1 115V AC 2 115V AC 3 115V AC NEUTRAL 4 115V AC NEUTRAL 5 115V AC NEUTRAL 6 115V AC
7 CHASSIS
8 CHASSIS
9 CHASSIS
No. Description 1 115V AC NEUTRAL 2 115V AC NEUTRAL 3 115V AC NEUTRAL 4 115V AC 5 115V AC
6 CHASSIS
Page 8 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in OUTLINE DRAWING: For detailed dimensions and tolerances see Drawing: M1987001
Page 9 of 9 Aug 10, 2021 | Rev (c) | Doc: DS_M1987 Series M1987 Series – AC Input Filter Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Note: Specifications are subject to change without prior notice by the manufacturer.