M191 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Page 1 of 5 Oct 18, 2021 | Rev g | Doc: DS_M191 Series M191 SERIES AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M191 SERIES AC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- FIVE OUTPUTS
- 3-PHASE AC/DC CONVERTER
- UP TO 300W
Page 2 of 5 Oct 18, 2021 | Rev g | Doc: DS_M191 Series M191 SERIES AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military, Airborne, Mobile, Ruggedized, Telecom, Industrial Power Supply Special Features
- Miniature size
- High efficiency
- Wide input range
- Input / Output isolation
- Output groups float from each other
- Fixed switching frequency
- EMI filters included
- Remote inhibit (TTL Level, Floating)
- Turn-on sequencing (option)
- BIT signal indicates outputs' status
- Limited inrush current
- Non-latching protections: o Overload / short-circuit o Over Temperature Environmental Conditions Meets or exceeds MIL-STD-810D
- Temperature: Operating: –55 C to +85 C (Colling surface) Storage: –55 C to +85 C
- Random Vibration IAW MIL-STD-810D Method 514.3, Procedure I, Category 7B Fig. D Reliability 100,000 hours, calculated per MIL-STD-217F Notice 2 at +85 C (Colling surface), Ground Fixed. Frequency [Hz] PSD [g2/Hz] Remarks 15 to 120 0.04 120 to 300 Rise to 0.04 4dB/oct 300 to 1000 0.14 1000 to 200 Decrease by 6dB/oct Electrical Specifications INPUT AC version input voltage range: Steady-state: 103 to
127 Vrms,l-n, 400 Hz, 3-Phase
Transients: 80 Vrms / 100 ms;
180 Vrms / 100 ms
DC version input voltage range: Steady-state: 220 to 350 VDC Transients: 160 VDC / 100 ms;
440 VDC / 100 ms Efficiency:
up to 82% EMC: Designed to meet* MIL-STD-461F CE102, CS101, CS114, CS115, RS102, RS103 Isolation: Input to Output: > 10 MΩ @ 500 VDC Input to Chassis: > 10 MΩ @ 500 VDC DC OUTPUTS (All floating from each other) Output voltage regulation: Less than ±3% (0 to full load, –55 C to +85 C) Ripple and Noise: 50 mVp-p, typical (max. 1% of typical output voltage) Current limiting: Continuous protection for unlimited time Over- Voltage Protection: Passive transorbs on outputs. Isolation: Output to Chassis: > 1 MΩ @ 100 VDC * Compliance achieved with shielded cables.
Page 3 of 5 Oct 18, 2021 | Rev g | Doc: DS_M191 Series M191 SERIES AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Operational Block Diagram Outputs Range Output # Voltage Range Current Range Power Range 1 3.3 to 12 VDC 0 to 15 A 0 to 135 W 2 3.3 to 12 VDC 0 to 10 A 0 to 50 W 3 3.3 to 24 VDC 0 to 4 A 0 to 60 W 4 3.3 to 24 VDC 0 to 4 A 0 to 60 W 5 3.3 to 28 VDC 0 to 9 A 0 to 230 W Total 0 to 300 W
Page 4 of 5 Oct 18, 2021 | Rev g | Doc: DS_M191 Series M191 SERIES AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment Input Connector (P1) Connector type: M24308/24-38F or eq. Mating connector type: M24308/2-2F or eq. Pin No. Function Pin No. Function Pin No. Function 1 N.C. 6 Phase C 11 N.C.
2 Phase A
7 N.C. 12 Phase B 3 N.C. 8 Chassis 13 N.C.
4 Phase B
9 N.C. 14 Phase C 5 N.C. 10 Phase A 15 N.C. Output Connector (J1) Connector type: M24308/23-40F or eq. Mating connector type: M24308/4-4F or eq. Pin No. Function P Pin No. Function P Pin No. Function P
1 OUT 3
+ 14 SENSE 2 + 27 OUT 5 RTN
2 OUT 3 RTN
– 15 OUT 1 RTN – 28 OUT 5
3 OUT 4
+ 16 OUT 1 RTN – 29 N/C
4 OUT 4 RTN
– 17 OUT 1 + 30 OUT 2 RTN
5 BIT
+ 18 OUT 1 + 31 OUT 2
6 INHIBIT
+ 19 SENSE 1 + 32 OUT 2
7 OUT 5 RTN
– 20 OUT 3 + 33 SENSE 1 RTN
8 OUT 5
+ 21 OUT 3 RTN – 34 OUT 1 RTN
9 OUT 5
+ 22 OUT 4 + 35 OUT 1 RTN
10 SENSE 2 RTN
– 23 OUT 4 RTN – 36 OUT 1
11 OUT 2 RTN
– 24 BIT RTN – 37 OUT 1
12 OUT 2 RTN
– 25 INHIBIT RTN
13 OUT 2
+ 26 OUT 5 RTN Note: All pins with identical function and/or designation should be connected together for best performance.
Page 5 of 5 Oct 18, 2021 | Rev g | Doc: DS_M191 Series M191 SERIES AC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Notes 1. Dimensions are in inches (mm) 2. Tolerance is: .XX .02 in. .XXX .01 in. 3. Weight: Approx. 4.4 lbs (2 kg) Note: Specifications are subject to change without prior notice by the manufacturer