M1467 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Page 1 of 6 Oct 18, 2021 | Rev f | Doc: DS_M1467 Series M1467 SERIES AC+DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M1467 SERIES AC+DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- DUAL INPUT
- FIVE OUTPUT
- WIDE INPUT RANGE
- HIGH DENSITY
- AC+DC/DC POWER SUPPLY
- UP TO 340 W
Page 2 of 6 Oct 18, 2021 | Rev f | Doc: DS_M1467 Series M1467 SERIES AC+DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military (Airborne, Mobile, Ground-Fix), Ruggedized, Telecom, Industrial Special Features
- Quad (4) DC output
- Dual (2) input
- High efficiency
- High power factor ( > 0.95)
- Inputs to Outputs isolation
- Inrush current limiting (AC & DC)
- Reverse voltage protection (DC)
- Remote Inhibit (ON/OFF)
- Fixed switching freq. (250 kHz)
- EMI filters included
- Indefinite short circuit protection with auto-recovery
- Over-voltage protection
- Over temperature shutdown with auto-recovery Electrical Specifications AC Input Voltage range: 85–156VRMS Frequency range: 400Hz Single phase DC Input Voltage Range: 18-70V IAW MIL-STD-704A Surge protection: 80V / 0.1s IAW MIL-STD-704A Isolation AC input to outputs: 500V DC input to outputs: 200V AC input to chassis: 500V DC input to chassis: 200V Outputs to chassis: 100V Outputs # Voltage Current Power 1 2.5-50V 25A 80W 2 2.5-50V 16A 80W 3 2.5-50V 18A 160W 4 2.5-50V 6A 20W 5 2.5-50V 4A 20W Total output power – 340W Line/Load regulation Up to ±2% (No load to full load, -40C to +85C). Ripple and Noise 100mVp-p, typical (max. 1%) without external capacitance. When connected to system capacitance ripple drops significantly. Efficiency AC input: Up to 73% DC input: Up to 79% Typical (Full load, nominal line voltage, room temperature) Load Transient Overshoot and undershoot Current change from 50%-100% output voltage change less than 10% within 200-300µSec Turn on Transient No output voltages overshoot during startup.
Page 3 of 6 Oct 18, 2021 | Rev f | Doc: DS_M1467 Series M1467 SERIES AC+DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Protections * Input
- Inrush Current Limiter Peak value of up to twice IIN for AC and DC Inputs.
- Under Voltage Lock Out Unit shuts down (no damage) below 75VAC or 16VDC.
- Reverse Polarity Protection (On DC input). No damage up to -36V. Output
- Active Over Voltage Protection Internal control protects unit (no damage) ~10% above nominal voltage.
- Passive Over Voltage Protection Transorbs on outputs protect loads ~20% above nominal voltage.
- Overload/Short Circuit Protection Continuous protection (10-50% above maximum current) for unlimited time (Hiccup). General
- Over Temperature Protection Shutdown at base plate temperature of +105C 5C. Automatic recovery at base plate temperature lower than +90C 5C. * Thresholds and protections can be modified / removed – please consult factory. * Compliance achieved with shielded harness and static resistive load. Depending on actual configuration, an external filter may be required for full compliance. Environmental Stress Screening (ESS) Including random vibration and thermal cycles is also available. Please consult factory for details. Environmental Designed to meet or exceed MIL-STD-810F Temperature Operating: –40C to +85C (base plate) Storage: –55C to +125C Altitude Method 500.4, Procedure I & II, 40,000 ft. and 70,000 ft. Operational Salt Fog Method 509-4 Humidity Method 507.4 - Up to 95%. Vibration and Shock Shock - Saw-tooth, 20g peak, 11mS. Vibration - Figure 514.5C-17. General minimum integrity exposure. (1 hour per axis.) Reliability 150,000 hours, calculated per MIL-STD-217F at +85C base plate, Ground fixed. EMC Designed to meet MIL-STD-461F*: CE101, CE102, CS101, CS114, CS115, CS116, RE101, RE102, RS101, RS103
Page 4 of 6 Oct 18, 2021 | Rev f | Doc: DS_M1467 Series M1467 SERIES AC+DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment – Input (Connector J1) Connector type: Eq. to M24308/3-13Z. Mating connector type: M24308/2-2Z or eq. Pin # Function Pin # Function Pin # Function
1 DC IN 6 DC IN RETURN 11 DC IN
2 DC IN 7 INPUT STATUS 12 DC IN RETURN
3 DC IN 8 PHASE 13 DC IN RETURN
4 DC IN RETURN 9 DC IN 14 DC IN RETURN
5 DC IN RETURN 10 DC IN 15 NEUTRAL
Pin Assignment – Output (Connector J2) Connector type: Eq. to M24308/1-27Z. Mating connector type: M24308/4-5Z or eq. Pin # Function Pin # Function Pin # Function
1 OUT2 18 OUT2 35 OUT2
2 N.C. 19 OUT2 RTN 36 OUT2 RTN
3 REMOTE ON/OFF 20 OUT2 RTN 37 OUT2 RTN
4 OUT2 SENSE 21 OUT2 SENSE RTN 38 OUT1
5 OUTPUT STATUS 22 OUT1 39 OUT1
6 SIGNAL RETURN 23 OUT1 40 OUT1 RTN
7 OUT1 24 OUT1 RTN 41 OUT1 RTN
8 OUT1 RTN 25 OUT1 RTN 42 OUT1
9 SENCE OUT1 26 OUT1 43 OUT1
10 SENCE OUT1 RTN 27 OUT1 44 OUT1
11 OUT1 28 OUT1 RTN 45 OUT1 RTN
12 OUT1 RTN 29 OUT1 RTN 46 OUT1 RTN
13 OUT1 RTN 30 OUT1 SENSE RTN 47 OUT3 (+)
14 OUT1 SENSE 31 OUT1 48 OUT3/4 RTN
15 OUT1 32 OUT1 RTN 49 OUT4 (-)
16 OUT1 RTN 33 OUT3/4 RTN 50 OUT3/4 RTN
17 OUT3 (+) 34 OUT2
- All output parallel pins should be connected together for best performance.
Page 5 of 6 Oct 18, 2021 | Rev f | Doc: DS_M1467 Series M1467 SERIES AC+DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Functions and Signals SENSE The SENSE is used to achieve accurate load regulation at load terminals. This is done by connecting the pins directly to the load’s terminals. The use of remote sense has a limit of voltage dropout between converter’s output and load terminals of 2% to 5% of voltage output. When not used connect +5V SENSE to +5VDC and +5V SENSE RETURN to +5VDC RETURN. REMOTE ON/OFF Signal (Connector J2, Pin #3) The remote on/off signal is used to turn the power supply ON and OFF. OPEN – will turn off the power supply. SHORT - For normal operation short the signal to signal return. This signal is TTL, and is referenced to SIGNAL RETURN on connector J2 (Pin #6). INPUT STATUS Signal (Connector J1, Pin #7) This signal shows the status of the input voltage. Logic '1' – DC input Logic '0' – AC input This signal is open collector type, and is referenced to SIGNAL RETURN on connector J2 (Pin #6). OUTPUT STATUS Signal (Connector J2, Pin #5) This signal shows the status of all outputs. Logic '1' - all outputs are within the tolerance of +/-5% of nominal values. Logic '0' – One output signal is outside the tolerance of +/-5% of nominal value. This signal is open collector type, and is referenced to SIGNAL RETURN on connector J2 (Pin #6). Typical Connection M1467-2 OUTPUT STATUS SIGNAL RETURN REMOTE ON/OFF INPUT STATUS OUTPUT STATUS REMOTE ON/OFF INPUT STATUS ±15V OUTPUT RETURN +15V OUTPUT -15V OUTPUT +15V LOAD -15V LOAD +5V OUTPUT RETURN +5V OUTPUT +5V LOAD +3.3V OUTPUT RETURN +3.3V OUTPUT +3.3V LOAD AC IN AC IN RTN Input AC Voltage DC IN DC IN RTN Input DC Voltage +3.3V SENSE +3.3V SENSE RETURN +5V SENSE +5V SENSE RETURN
Page 6 of 6 Oct 18, 2021 | Rev f | Doc: DS_M1467 Series M1467 SERIES AC+DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Note: Specifications are subject to change without prior notice by the manufacturer Notes 1. Dimensions are in mm 2. Tolerances are: .X 0.4 mm .XX 0.20 mm 3. Weight: Approx. 1,720 g.