M1132 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Page 1 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M1132 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- COMPACT
- 6 OUTPUTS
- UP TO 320W
Page 2 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features
- High density
- Wide input voltage range
- Input / Output isolation
- Remote sense
- External On/Off
- Fixed switching freq. (250 kHz)
- External sync. capability
- EMI filters included (5 µH LISNs)
- I2C communication
- Non-latching protections: o Overload / short-circuit o Over-voltage o Over-temperature Electrical Specifications* DC Input
- Steady-State: 18 to 48 VDC
- Comply with MIL-STD-704F normal transients DC Outputs** Isolation Input to Output: 200 VDC Input to Case: 200 VDC Output to Case: 100 VDC # Voltage range Current range Power range 1 3.3-12 V 0-10A 0-100 W 2 3.3V-6V 0-30A 0-120W 3 3.3V-6V 0-15A 0-60W 4 -20V- -3.3V 0-4A 0-22W 5 2V-2.5V 0-2A 0-4.5W 6 10V-28V 0-0.65A 0-18W Total output power: up to 320 W Output Voltage Regulation Less than ±1.5% (no load to full load, –55 C to +85 C and over normal input voltage range). Efficiency 86% - Typical (nominal input voltage, full load, room temperature) EMC Complies with MIL-STD-461F (with 5 µH LISNs): CE101, CE102, CS101, RE102 (tested with shielded cables). Design to meet CS114, CS115, and CS116. Ripple and Noise Typically less than 50 mVp-p (max. 1%), measured across a 0.1 μF capacitor, with 10 μF capacitor across load at Input Voltage of 18V-36V, all Temperature Range. Transient Over-and-undershoot Output dynamic response of less than 5% at load step of 50%-100%. Output returns to regulation in under 1 ms. Communication I2C protocol available for input voltages, temperature for all output voltages (GAx, SCL, SDA) *Unless stated otherwise, all measurements specified here were taken under full load conditions, at steady -state input voltage over full temperature range.
Page 3 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Protections * Input
- Under-Voltage Lockout Unit shuts down if input voltage drops below 16.5 ± 1 V. Automatic restart when input voltage rises above 20 ± 1 V. Minimum hysteresis: 2 V.
- Over-Voltage Lockout Unit shuts down if input voltage rises above 55 ± 2 V. Automatic restart when input voltage falls below 38 ± 2 V. Lockout is delayed by at least 100 ms from the onset of the over-voltage state, to allow operation through normal transients, per MIL-STD-704 and MIL-STD-1275. Output
- Over-Voltage Protection
- Overload / Short-Circuit Protection Continuous protection (10-30% above maximum current) for unlimited time (Hiccup). Automatic recovery when overload/short-circuit removed. General
- Over Temperature Protection Automatic shutdown in case internal temperature rises above 105 ± 5 °C. Environmental Conditions Designed to meet MIL-STD-810G Temperature – High Method 501.5 Procedure I – Storage: up to +125 °C Procedure II – Operation: up to +85 °C cooling surface Temperature – Low Method 502.5 Procedure I – Storage: down to –55 °C Procedure II – Operation: down to –55 °C Altitude Method 500.5 Procedures I - Storage/Air Transport: up to 40 kft Procedures II - Operation/Air carriage: up to 70 kft Humidity Method 507.5 Up to 95% RH Fungus Method 509.5 Does not support fungus growth, in accordance with the guidelines of MIL-STD-454, Requirement 4. Salt Fog Method 509.5 Vibration (random) Method 514.6 Procedure I – General Vibration Category 24 – General minimum integrity exposure Shock Method 516.6 Procedure I – Functional Shock 40 g, 11 ms Terminal peak sawtooth shock pulse (all directions) Environmental Stress Screening (ESS) Including random vibration and thermal cycles is also available. Please consult factory for details. * Thresholds and protections can be modified / removed – please consult factory
Page 4 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Block Diagram
Page 5 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment Connector type: Positronic DD78M4000C-15 or eq. Mating connector: M24308/2-15F or eq. Pin Number Pin Name 40 -DC_IN 41 +DC_IN 42 +DC_IN 43 -DC_IN 44 -
45 Sense_Out3
46 Enable_B
47 SDA
48 POWER_RETURN_B
49 Out3
50 Sync
51 POWER_RETURN_A
52 Out1
53 Out2
54 POWER_RETURN_B
55 Out2
56 POWER_RETURN_B
57 Out2
58 POWER_RETURN_B
59 Out4
60 -DC_IN 61 +DC_IN 62 -DC_IN
63 Shoutdown
64 Return_Sense_Out3
65 Enable_A
66 SCL
67 POWER_RETURN_B
68 POWER_RETURN_B
69 Out3
70 Out3
71 Signal_RTN
72 Out2
73 POWER_RETURN_B
74 Out2
75 POWER_RETURN_B
76 Out2
77 POWER_RETURN_B
78 Out4
1 -DC_IN 2 +DC_IN 3 +DC_IN 4 +DC_IN 5 -
6 Out6
7 POWER_RETURN_B
8 Out3
9 Out3
10 Out5
11 POWER_RETURN_A
12 Out1
14 Out2
15 POWER_RETURN_B
16 Out2
17 POWER_RETURN_B
18 POWER_RETURN_B
19 Return_Sense_Out2
20 Sense_Out2
21 -DC_IN 22 +DC_IN 23 -DC_IN 24 -
25 POWER_RETURN_C
26 Enable_C
27 POWER_RETURN_B
28 POWER_RETURN_B
29 Out3
30 POWER_RETURN_B
31 POWER_RETURN_A
32 Out1
33 Out2
34 POWER_RETURN_B
35 Out2
36 POWER_RETURN_B
37 Out2
38 POWER_RETURN_B
39 POWER_RETURN_B
Page 6 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pinout information: Out1: out1_rtn: POWER_RETURN_A, Out2: out2_rtn: POWER_RETURN_B, on/off ¹ by Enable_A ². Out3: out3_rtn: POWER_RETURN_B, on/off ¹ by Enable_B ². Out4: out4_rtn: POWER_RETURN_B, on/off ¹ by Enable_B ². Out5: out5_rtn: POWER_RETURN_B, on/off ¹ by Enable_B ². Out6: out6_rtn: POWER_RETURN_C, on/off ¹ by Enable_C ². Shutdown: on/off ³ all outputs by signal shutdown ⁴. SCL, SDA: SCL², SDA² signals used for I2C bus Clock and Data respectively. Sync: Sync² signal is used to allow the power supply frequency to sync with the system frequency. Notes : 1. On – short enable , off – open enable. 2. Signal referenced to SIGNAL RTN(which referenced to POWER_RETURN_A). 3. On – open Shutdown , off – short Shutdown. 4. Signal referenced to -DC_IN POWER_RETURN_B Out2 Out2 POWER_RETURN_B Out2 POWER_RETURN_B Out2 POWER_RETURN_B POWER_RETURN_B POWER_RETURN_B Out2 +DC_IN +DC_IN +DC_IN +DC_IN -DC_IN -DC_IN -DC_IN Out1 Out1 Out1 POWER_RETURN_C POWER_RETURN_A POWER_RETURN_A POWER_RETURN_A Enable_C Enable_B Enable_A SDA SCL Sy nc Out2 S_Out2 Out2 Out2 Out2 POWER_RETURN_B POWER_RETURN_B 78Pin POWER_RETURN_B POWER_RETURN_B S_Out3 RS_Out2 Out3 Out3 Out3 Out3 POWER_RETURN_B RS_Out3 POWER_RETURN_B POWER_RETURN_B Out4 Out4 Out6 POWER_RETURN_B Out5 Signal_RTN -DC_IN Out2 Shoutdown POWER_RETURN_B -DC_IN +DC_IN -DC_IN +DC_IN -DC_IN Out2 POWER_RETURN_B POWER_RETURN_B
Page 7 of 7 Oct 24, 2023 | Rev h | Doc: DS_M1132 Series M1132 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Notes 1. Dimensions are in mm [inch] do not scale drawing 2. Tolerance is: X.X 0. 3 X.XX 0.20 ANGLES 1 X.XXX 0.100 3. Weight: Approx. 730 g Note: Specifications are subject to change without prior notice by the manufacturer. NOTES: 1. CONNECTOR: DD78M4000C-15 OR EQ. (GOLD OVER NICKEL CONTACTS) 2. HEAT DISSIPATION AREA – 14, 488.01 mm2 3. WORKMANSHIP SHALL BE MIL-STD-454, REQT. 9 4. MTL. AL 6061 – T651& AL 5052-H32 5. CONVERSION COATING PER MIL-C-5541, TYPE, CLASS 1A 6. COOLING SURFACE FINISH, MEDIUM PHOSPHOROUS ELECTROLESS NICKEL, 8-15um THK, MIL-DTL-26074 – BOTTOM SURFACE AND THE 4 SIDES.