LWK13743Z-S21-A01 LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ROUND TYPE LED LAMPS LWK13743Z/S21-A01 DATA SHEET DOC. NO : QW0905-LWK13743Z/S21-A01 REV. : A DATE : 17 - May. - 2011 發行 DCC 立碁電子

+ - 5.95.0 □0.5 TYP 25.0MIN 1.0MIN 2.54TYP 1.5MAX 8.67.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Package Dimensions Page 1/8 PART NO. LWK13743Z/S21-A01 Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation WK Zener 12.8±0.5 50% -60° 50%100%75% 025%25% -30° 60° 100%75% 30°

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Absolute Maximum Ratings at Ta=25 ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Tstg Storage Temperature PART NOMATERIAL LWK13743Z/S21-A01 Emitted InGaN/GaN White Water Clear Lens COLOR IF Forward Current Operating Temperature Reverse Current @5V Power Dissipation Peak Forward Current Duty 1/10@10KHz Topr Ir PD IFP Parameter Symbol -30~ +100 Luminous intensity @20mA(mcd) Viewing angle 2θ 1/2 (deg) Forward voltage @20mA(V) 4.03.5 Max. Min. Typ. Page 2/8 30 mA -20~ +80 μA 120 100 mA mW WK Ratings UNIT Chromaticity Coordinates X Y V8000ESD Electrostatic Discharge( * ) Typ. Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. 2200 4000 PART NO. LWK13743Z/S21-A01

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/8 . CIE Chromaticity Diagram PART NO. LWK13743Z/S21-A01 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 VM VN VO VP WM WN WO WP WQ XM XN XO XP 5000K 5650K 6300K 7000K

. Chromaticity Coordinates Specifications for Bin Grading PART NO. LWK13743Z/S21-A01 Page 4/8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only yxBin Code CCT (K) VM 5000-5650 VN VO VP WM 5650-6300 WN 0.35700.3290 0.38600.3480 0.3470 0.3720 0.3290 0.3690 0.34500.3290 0.37200.3470 0.3460 0.3590 0.3290 0.3570 0.33100.3290 0.35900.3460 0.3440 0.3440 0.3290 0.3450 0.33100.3290 0.33200.3430 0.3290 0.3200 0.3440 0.3440 0.36900.3290 0.34400.3150 0.3140 0.3550 0.3290 0.3570 0.34500.3290 0.34400.3150 0.3290 0.3570 0.3160 0.3330 0.32000.3170 0.29300.3110 0.3200 0.3010 0.3080 0.3110 0.32200.3050 0.32000.3170 0.3160 0.3330 0.3080 0.3110 0.33300.3030 0.33300.3160 0.3150 0.3440 0.3050 0.3220 0.35500.3140 0.33300.3030 0.3150 0.3440 0.3010 0.3420 0.32000.3290 0.31050.3200 0.3300 0.3100 0.3185 0.3105 0.32000.3290 0.32000.3170 0.3180 0.3100 0.3290 0.3310 WQ WP XP XO 6300-7000 XN XM 0.34500.3290 0.32000.3170 0.3160 0.3330 WO 0.3290 0.3310

PART NO. LWK13743Z/S21-A01 Page 5/8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 6200 A28 5000 27002200 Min. Max. Bin Code Group A25 Luminous Intensity(mcd) at 20 mA Brightness Code For Standard LED Lamps 34002700 50004000 34004000 A26 A29 A27

Fig.5 Luminous Spectrum(Ta=25℃) Typical Electro-Optical Characteristics Curve 1.03.04.0 0 1 Intensity Wavelength (nm) 0.5 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Ambient Temperature(℃)Ambient Temperature(℃) 0-20-40 0.8 0-40-2010080604020 0.0 601008040 Fig.4 Relative Intensity vs. Temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 Fig.3 Forward Voltage vs. Temperature 1.2 3.0 Relative Intensity Normalize @20mA Forward Current(mA) Forward Current(mA)Forward Voltage(V) 2.05.0110 0.0 0.5 1.0 1.5 2.0 1001000 Fig.2 Relative Intensity vs. Forward CurrentFig.1 Forward current vs. Forward Voltage 2.5 3.0 100 1000 WK CHIP SPECTRAL RADIANCE 400500600 100 700800 Page 6/8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LWK13743Z/S21-A01

PART NO. LWK13743Z/S21-A01 Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.

60 Seconds Max

2.Wave Soldering Profile LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) Time(sec) 150 260°C3sec Max 100 5°/sec max 50Preheat 2°/sec max 260° 120° 0°0 25° Temp(°C) Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 °C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body)

MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. (10min) (10min) 2.total 10 cycles Solder Resistance Test Thermal Shock Test High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hours. Reliability Test: Page 8/8 Reference Standard MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) High Temperature Storage Test Operating Life Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. Test Item Test Condition Description LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LWK13743Z/S21-A01