LSRF12343-PF-TBS-X

LSRF12343-PF-TBS-X LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

TAPE AND BOX TYPE LED LAMPS LSRF12343-PF/TBS-X LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET DOC. NO : QW0905-LSRF12343-PF/TBS-X REV. : A DATE : 13 - Jun. - 2008 Lead-Free Parts Pb

+ - PART NO. LSRF12343-PF/TBS-X LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Package Dimensions Page LSRF12343-PF Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 3.8 3.0 25.0MIN 1.0MIN 4.1 2.54TYP 1.5MAX □0.5 TYP 3.3 L D T P F - + W1 W3 ΔH

Topr Operating Temperature -40 ~ +85 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Typical Electrical & Optical Characteristics (Ta=25 ℃) Storage Temperature -40 ~ +100Tstg ℃ Absolute Maximum Ratings at Ta=25 ℃ Electrostatic Discharge( * ) Forward Current Reverse Current @5V Peak Forward Current Duty 1/10@10KHz Power Dissipation Parameter Page 2/6 2000 Ratings IF ESD Ir PD IFP Symbol mA30 μA V mA mW SRF UNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. PART NO. LSRF12343-PF/TBS-X Water Clear Red120 630202.4 1.5 50220 EmittedLens COLOR Luminous intensity @20mA(mcd) Min. Spectral halfwidth △λnm Forward voltage @20mA(V) Dominant wave length λDnm Min. Max. Viewing angle 2θ 1/2 (deg) Typ. LSRF12343-PF/TBS-X AlGaInP PART NOMATERIAL

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 4.2 mm Maximum 0.17 inch 2.0 22.5 18.5 25.0 23.5 20.9 26.5 0.98 1.04 0.82 0.93 0.73 0.89 0.08 3.00.12 inch 0.15 mm 3.8 Minimum SYMBOL 0.85 0.69 21.5 17.5 0.89 0.94 0.78 22.5 24.0 19.9 25.51.0 SPECIFICATIONS SYMBOL ITEMS Dimension Symbol Information• Component Lead Pitch Feed Hole To Bottom Of Component Front-To-Rear Deflection Tape Feed Hole Diameter TBS-7 TBS-3 TBS-6 TBS-5 TBS-1 TBS-2 OPTION CODE 19.4 22.0 20.0 19.0 21.5 0.75 1.42 0.43 0.76 0.85 0.87 0.79 5.8 1.42 7.7 9.75 15.5 4.0 0.38 0.75 0.16 0.61 0.23 0.3 0.06 130.51 0.75 0.83 0.72 19.0 21.0 18.4 0.71 18.0 20.50.81 L 0.17 0.2 4.4 5.1 0.33 0.57 0.69 14.5 8.5 17.5 T mm 34013.4 inch maxmum 2.460 27510.8 Package Dimensions• Feed Hole Location Tape Width Adhesive Tape Position Adhesive Tape Width Feed Hole To Overall Component Height Lead Length After Component Height Overall Taped Package Thickness Center Of Component Location Lead Location Feed Hole Pitch inch 13.0 mm 330 minimum L Symbol 1.9750H 265W10.4 Quantity/Box Overall Length Overall Thickness Overall Width

Description

Dimensions Symbol Information• 2500PCS Specification REMARK:TBS=Tape And Box Straight Leads TBS-13 TBS-10 TBS-12 TBS-11 TBS-9 24.5TBS-80.9625.51.0 Page 3/6 PART NO. LSRF12343-PF/TBS-X

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Wavelength (nm) Relative Intensity@20mA 0.0 550600 0.5 Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 40020 1.1 1.0 0.9 1.2 700650 Ambient Temperature(℃) Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ 0.5 -401008060 0.0 0-20 406020 1.5 1.0 2.0 2.5 3.0 80100 Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve Forward Current(mA) 100 2.01.0 0.1 3.0 1.0 SRF CHIP 1000 Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA 1.04.05.0 0.0 0.5 1.0 1.5 2.0 Forward Current(mA) 10100 2.5 3.0 1000 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 4/6Page Fig.6 Directivity Radiation PART NO. LSRF12343-PF/TBS-X

2.Wave Soldering Profile Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 150 Time(sec) 260°C3sec Max 260° Temp(°C) 2°/sec max 10050Preheat 120° 25° 00° Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 5°/sec max Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) PART NO. LSRF12343-PF/TBS-X

60 Seconds Max

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reference Standard MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 DescriptionTest ConditionTest Item Reliability Test: 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. Low Temperature Storage Test High Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Operating Life Test This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. Page 6/6 MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. Solder Resistance Test Thermal Shock Test High Temperature High Humidity Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this test is the resistance of the device under tropical for hours. This test intended to see soldering well performed or not. PART NO. LSRF12343-PF/TBS-X