LSR9033-T-TR2

LSR9033-T-TR2 LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

SURFACE MOUNT TAPE AND REEL LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET LSR9033/T/TR2 DOC. NO : QW0905-LSR9033/T/TR2 REV. : B DATE : 24 - Jan. - 2006 Lead-Free Parts Pb

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page1/7 ψ1.9 0.5±0.1 2.0 4.0 0.3 5.5 1.75 4.0 ψ1.55 3.05 6.43 2.8 PART NO. LSR9033/T/TR2 Package Dimensions 0.4±0.1 0.7 Carrier Type Dimensions Polarity 9.3 12±0.3 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. 2.0 2.5 1.4 5.8±0.5 3.05±0.5 4.3±0.5

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 2/7PagePART NO. LSR9033/T/TR2 Reel Dimensions 16.0±1.0 74.0±1.514.2±1.0 1500 devices Quantity/Reel 12.0mm tape,7"reel

Description

Part No. ψ178±2.0

PART NO. LSR9033/T/TR23/7 Page UNIT mA mA mW μA SR Ratings Symbol 100 100 IF IFP PD Ir Parameter Reverse Current @5V Power Dissipation Peak Forward Current Duty 1/10@10KHz Forward Current Absolute Maximum Ratings at Ta=25 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Viewing angle 2θ 1/2 (deg) 1820 Typ. -40 ~ +85 -40 ~ +100 Topr Tstg Storage Temperature Operating Temperature Typical Electrical & Optical Characteristics (Ta=25 ℃) Spectral halfwidth △λnm Forward voltage @2 mA(V) 2.0201.5 Max.Min. Peak wave length λPnm 660 Lens MATERIAL RedGaAlAs Emitted PART NO LSR9033/T/TR2 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Water Clear COLOR 9.0 Min. Luminous intensity @2mA(mcd) Electrostatic Discharge ESD2000 V

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 600650700750 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-4040 20080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 SR CHIP Page 4/7LSR9033/T/TR2 PART NO. 30° 100% 60° 50%75% -30° 050% 25%100% -60° 75% 25% Fig.6 Directive Radiation

Recommended Soldering Conditions LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Soldering heat Max. 260℃ 245±5℃ within 5 sec Preheat120 ~ 150℃ 2. Wave Solder 240 3-1. LEAD Reflow Solder Temp. (℃) 120 ~ 180 sec 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Time 260°C MaX. 10sec.Max Above 220 °C 60 sec.Max. 150 120 Preheat 60 ~ 120 sec 1~5°C/sec Preheat 180~200 °C 3-2 PB-Free Reflow Solder 5sec 1~5°C/sec 120 sec.Max. Reflow Soldering should not be done more than two times. Rising +5℃/sec Cooling -5℃/sec PART NO.

PART NO. LSR9033/T/TR2 6/7Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Circuit model B Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH<60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH<60%, they should be treated at 60℃±5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. Circuit model A LEDLED ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.

PART NO. LSR9033/T/TR27/7 Reference StandardTest ConditionTest Item Reliability Test: Classification 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=1000hrs ±2hrs (10min) (10min) 2.total 10 cycles Operating Life Test Low Temperature Storage Test High Temperature Storage Test Endurance Test High Temperature High Humidity Storage Test Thermal Shock Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page MIL-STD-883D:1008 JIS C 7021: B-10 MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 MIL-STD-202F:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 1.T=260¢XC Max. 10sec.Max. 2. 6 Min 30mins 5mins 30mins 5mins

2.10 Cyeles

Test MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 Solderability Test 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface