LSR9033

LSR9033 LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DOC. NO : QW0905-LSR9033 REV. : A DATE : 12 - Sep - 2005

30° 100% 60° 50% 75% -30° 050% 25%100% -60° 75% 25% Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation PART NO. Package Dimensions LSR9033 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/6 ψ1.9 7.0MIN 2.0 Cathode Mark 0.7 0.7 1.4 1.4 0.16 2.5 7.0MIN 0.4±0.1 2.5 0.5±0.1

Min. Max 260℃ for 5 sec Max (2mm from body) Luminous intensity @20mA(mcd)COLOR Water Clear Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LSR9033 PART NO Emitted GaAlAs Red MATERIAL Lens 660 Peak wave length λPnm Max.Min. 1.520 2.4 Forward voltage @20 mA(V) Spectral halfwidth △λnm Typical Electrical & Optical Characteristics (Ta=25 ℃) Storage Temperature Soldering Temperature Operating Temperature Tstg Tsol Topr -40 ~ +100 -40 ~ +85 Typ. 20180 Viewing angle 2θ 1/2 (deg) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Absolute Maximum Ratings at Ta=25 ℃ Reverse Current @5V Power Dissipation Peak Forward Current Duty 1/10@10KHz Forward Current Parameter Ir PD IFP IF 100 100 Symbol Ratings SR μA mW mA mA UNIT Page 2/6 PART NO. : LSR9033

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 600 650 700 750 0.0 0.5 1.0 2.0 3.0 4.0 5.0 80 100 0.8 0.9 -20-40 40 2008 0 1 0 0 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 SR CHIP Page 3/6LSR9033 PART NO.

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/6 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Recommended Soldering Conditions 2. Wave Solder Preheat 180~200 °C Reflow Soldering should not be done more than two times. 120 sec.Max. 1~5°C/sec Above 220°C 60 sec.Max. 120 ~ 180 sec 120 3-2 PB-Free Reflow Solder 60 ~ 120 sec Temp. (℃) 240 3-1. LEAD Reflow Solder 150 Preheat Rising +5℃/sec Time5sec 1~5°C/sec 260°C MaX. 10sec.Max Cooling -5℃/sec 120 ~ 150℃ Preheat 245±5℃ within 5 sec Soldering heat Max. 260℃ PART NO. : LSR9033

(A) Recommended circuit. (B) The difference of brightness between LED could be f ound due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Drive Method: LED is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to c hange by more than 40 % of its desired value. Circuit model A Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH60%. 2.Once the package is opened, the products s hould be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.If opened more than one week in an atmos phere 5℃ ~ 35℃,RH60%, they should be treated at 60 ℃±5 ℃fo r 15hrs. Circuit model B LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 5/6Page PART NO. : LSR9033

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reliability Test: Classification Endurance Test Environmental Test Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) (10min) (10min) 2.total 10 cycles 30mins 5mins 30mins 5mins

2.10 Cyeles

1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 1.T=260¢XC Max. 10sec.Max. 2. 6 Min Temperature Cycling IR Reflow Thermal Shock Test High Temperature High Humidity Storage Test Solderability Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=1000hrs ±2hrs MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-750D:2031.2 J-STD-020 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 JIS C 7021: B-12 MIL-STD-202F:103B JIS C 7021: B-11 Test Condition 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, + 72hrs) Test Item Operating Life Test High Temperature Storage Test MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 MIL-STD-883D:1008 JIS C 7021: B-10 Reference Standard PART NO. : LSR9033