LSR1130-PF LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

A - 200618 - May. LSR1130-PF LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LSR1130-PF DATA SHEET DOC. NO : QW0905- REV. : DATE : SUPER BRIGHT TOWER TYPE LED LAMPS

+ - 75% 50% -30° 25%025%75% 50% 60° 30° 100%100% -60° 4.5 8.5 2.54TYP 25.0MIN □0.5 TYP 1.5 MAX 1.5 4.0 5.65.02.0 1/5PageLSR1130-PFPART NO. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Package Dimensions Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation

Typical Electrical & Optical Characteristics (Ta=25 ℃) Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Absolute Maximum Ratings at Ta=25 ℃ Symbol Lens COLOR PART NO LSR1130-PF Emitted GaAlAs Red MATERIAL Storage Temperature Operating Temperature Power Dissipation Reverse Current @5V Forward Current Peak Forward Current Duty 1/10@10KHz Parameter Forward voltage @20mA(V) 2.4 Max.Min. 660201.5 Spectral halfwidth △λnm Peak wave length λPnm Min. Typ. 1201221 Luminous intensity @20mA(mcd) Viewing angle 2θ 1/2 (deg) -40 ~ +100Tstg ℃ -40 ~ +85Topr Ir10 IFP PD IF 100 100 μA mA mW mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Ratings SR UNIT Page 2/5PART NO. LSR1130-PF

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 600650700750 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-4040 20080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 SR CHIP Page 3/5PART NO. LSR1130-PF

260°C3sec Max 5°/sec max 260° 120° Temp(°C) Time(sec) 15050 100 2°/sec max25° Preheat0 Page 4/5 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body)

60 Seconds Max

PART NO. LSR1130-PF

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reference Standard MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 DescriptionTest ConditionTest Item Reliability Test: 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. Low Temperature Storage Test High Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Operating Life Test This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. Solder Resistance Test Thermal Shock Test High Temperature High Humidity Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this test is the resistance of the device under tropical for hours. This test intended to see soldering well performed or not. Page 5/5PART NO. LSR1130-PF