LSEF9033-TR1

LSEF9033-TR1 LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

SURFACE MOUNT TAPE AND REEL LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET LSEF9033/TR1 DOC. NO : QW0905-LSEF9033/TR1 REV. : A DATE : 29 - Sep - 2005

2.16 0.3 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/7 Package Dimensions Carrier Type Dimensions Polarity Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. PART NO. LSEF9033/TR1 Cathode 2.5 4.6±0.5 3.32 1.75 5.5 12±0.3 4.85 2.8 0.16 9.3 0.7 0.4 1.4 1.54.0 4.0 2.0 ψ1.9

PART NO. LSEF9033/TR1 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 2/7Page Reel Dimensions 16.0±1.0 74.0±1.514.2±1.0 1500 devices Quantity/ReelDescription 12.0mm tape,7"reelLSEF9033/TR1 Part No. ψ178±2.0

PART NO. LSEF9033/TR1 3/7Page UNIT mA mA mW μA SEF Ratings Symbol 120 IF IFP PD Ir Parameter Reverse Current @5V Power Dissipation Peak Forward Current Duty 1/10@10KHz Forward Current Absolute Maximum Ratings at Ta=25 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Viewing angle 2θ 1/2 (deg) 2200 20 Typ. -40 ~ +85 -40 ~ +100 Topr Tsol Tstg Soldering Temperature Storage Temperature Operating Temperature Typical Electrical & Optical Characteristics (Ta=25 ℃) Spectral halfwidth △λnm Forward voltage @20 mA(V) 2.617 1.7 Max.Min. 605 Lens Dominant wave length λDnm MATERIAL OrangeAlGaInP Emitted PART NO LSEF9033/TR1 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Water Clear COLOR Max 260℃ for 5 sec Max (2mm from body) 1100 Min. Luminous intensity @20mA(mcd)

2000 Electrostatic Discharge ESD V

Relative Intensity@20mA 550 0.0 0.5 Wavelength (nm) 600 650500 Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 1.0 0.9 1.1 1.2 0.5 Relative Intensity@20mA Normalize @25℃ -20 Ambient Temperature(℃) 806040200- 4 0 100 0.0 806002 04 0 1 0 0 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve 100 Forward Current(mA)0.1 1.0 1.0 1000 SEF CHIP Relative Intensity Normalize @20mA Forward Voltage(V) 0.0 1.5 1.0 0.5 2.0 2.5 Forward Current(mA) 10 100 1000 Fig.2 Relative Intensity vs. Forward Current 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page4/7 PART NO. LSEF9033/TR1 60° 30° -60° -30° Fig.6 Directive Radiation

PART NO. LSEF9033/TR1 Page 5/7 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 245±5℃ within 5 sec Soldering heat Max. 260℃ Cooling -5℃/sec Time5sec 260° C MaX. 10sec.Max 1~5°C/sec Preheat 180~200°C Above 220°C 60 sec.Max. 2. Wave Solder 120 ~ 150℃ Temp. (℃) Preheat 240 3-1. LEAD Reflow Solder 120 1~5°C/sec 3-2 PB-Free Reflow Solder 150 Reflow Soldering should not be done more than two times. 120 sec.Max. 60 ~ 120 sec Rising +5℃/sec Preheat 120 ~ 180 sec Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only.

PART NO. LSEF9033/TR1 6/7Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Circuit model B Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH60%. 2.Once the package is opened, the products s hould be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.If opened more than one week in an atmos phere 5℃ ~ 35℃,RH60%, they should be treated at 60 ℃±5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to c hange by more than 40 % of its desired value. Circuit model A LEDLED ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. (A) Recommended circuit. (B) The difference of brightness between LED could be f ound due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.

PART NO. LSEF9033/TR1 7/7 Reference StandardTest ConditionTest Item Reliability Test: Classification 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=1000hrs ±2hrs (10min) (10min) 2.total 10 cycles Operating Life Test Low Temperature Storage Test High Temperature Storage Test Endurance Test High Temperature High Humidity Storage Test Thermal Shock Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, + 72hrs) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page MIL-STD-883D:1008 JIS C 7021: B-10 MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 MIL-STD-202F:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 1.T=260°C Max. 10sec.Max. 2. 6 Min 30mins 5mins 30mins 5mins

2.10 Cyeles

Test MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 Solderability Test 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface