LSE9033-TR1 LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

DOC. NO : QW0905-LSE9033/TR1 REV. : A DATE : 12 - Dec. - 2006 DATA SHEET LSE9033/TR1 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Lead-Free Parts Pb

4.0 2.8 4.6±0.5 2.5 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 9.3 12±0.3 Polarity 2.0 Carrier Type Dimensions 4.0 0.16 PART NO. LSE9033/TR1 0.4±0.1 Package Dimensions 1.4 4.85 3.321.5 5.5 1.75 2.16 0.3 0.4 0.7 Page 0.5±0.12.0 ψ1.9 Cathode LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only

ψ178±2.0 Part No. 12.0mm tape,7"reel

Description

14.2±1.0 74.0±1.5 16.0±1.0 PART NO. : LSE9033/TR1 Reel Dimensions Page2/7 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only

λPnm LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Electrical & Optical Characteristics (Ta=25 ℃) Absolute Maximum Ratings at Ta=25 ℃ Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. MATERIALPART NO LSE9033/TR1 Orange Emitted GaAsP/GaP Water Clear Lens COLOR Peak Forward Current Duty 1/10@10KHz IFP Operating Temperature Storage Temperature Reverse Current @5V Power Dissipation Ir Tstg Topr PD Forward Current Parameter Symbol IF Spectral halfwidth △λnm Forward voltage @ mA(V)20 Viewing angle 2θ1/2 (deg) Max. 45 2.61.7 Min. 2012.520 Min. Typ. Luminous intensity @10mA(mcd) mA80 μA10 -40 ~ +100 -40 ~ +85 80 mW UNIT SE mA Ratings 3/7Page PART NO. : LSE9033/TR1

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 550 600 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-40 4020080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 700750 SE CHIP 4/7Page PART NO. : LSE9033/TR1

Soldering heat Max. 260℃ Preheat Rising +5℃/sec 120 ~ 180 sec 120 sec.Max. Preheat 180~200°C Recommended Soldering Conditions 150 3-2 PB-Free Reflow Solder 1~5°C/sec 60 ~ 120 sec 120 3-1. LEAD Reflow Solder Temp. (℃) 240 Preheat 120 ~ 150℃ 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Above 220 °C 60 sec.Max. 1~5°C/sec 260°C MaX. 10sec.Max 5sec Time Cooling -5℃/sec 245±5℃ within 5 sec LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page5/7 Note:1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. PART NO. : LSE9033/TR1

ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH<60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5℃ ~ 35℃,RH<60%, they should be treated at 60℃±5 ℃fo r 15hrs. Circuit model A Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. Circuit model B LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page6/7 PART NO. : LSE9033/TR1

MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 Solderability Test 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020 Environmental Test IR Reflow Temperature Cycling 1.T=260¢XC Max. 10sec.Max. 2. 6 Min 30mins 5mins 30mins 5mins

2.10 Cyeles

MIL-STD-883D:1008 JIS C 7021: B-10 MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 MIL-STD-202F:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Thermal Shock Test High Temperature High Humidity Storage Test Endurance Test High Temperature Storage Test Low Temperature Storage Test Operating Life Test (10min) (10min) 2.total 10 cycles 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=1000hrs ±2hrs 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Classification Reliability Test: Test Item Test Condition Reference Standard Page7/7 PART NO. : LSE9033/TR1