LSE42240-PF LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

DOC. NO : QW0905-LSE42240-PF REV. : A DATE : 20 - Apr. - 2006 Pb LSE42240-PF DATA SHEET Lead-Free Parts ROUND TYPE LED LAMPS LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only

75%100% -60° 60° -30° 30° Directivity Radiation Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. PART NO. LSE42240-PF Package Dimensions 3.0 4.0 □0.5 TYP 25.0MIN 1.0MIN 2.54TYP + - 4.2 5.2

1.5 MAX

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/5

λPnm LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Electrical & Optical Characteristics (Ta=25 ℃) Absolute Maximum Ratings at Ta=25 ℃ Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. MATERIALPART NO LSE42240-PF Orange Emitted GaAsP/GaP Orange Diffused Lens COLOR Peak Forward Current Duty 1/10@10KHz IFP Operating Temperature Storage Temperature Reverse Current @5V Power Dissipation Ir Tstg Topr PD Forward Current Parameter Symbol IF Spectral halfwidth △λnm Forward voltage @ mA(V)20 Viewing angle 2θ1/2 (deg) Max. 452.6 1.7 Min. 382050 Min. Typ. Luminous intensity @10mA(mcd) mA80 μA10 -40 ~ +100 -40 ~ +85 80 mW UNIT SE mA Ratings 2/5Page PART NO. LSE42240-PF

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 550 600 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-40 4020080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 700750 SE CHIP 3/5Page PART NO. LSE42240-PF

Temp(°C) 120°

60 Seconds Max

0° 0 25° Preheat 50 2°/sec max 260° Time(sec) 100 150 5°/sec max 260°C3sec Max Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/5 PART NO. LSE42240-PF

MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 This test intended to see soldering well performed or not. The purpose of this test is the resistance of the device under tropical for hours. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.

Description

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Solderability Test Solder Resistance Test (10min) (10min) 2.total 10 cycles 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs Thermal Shock Test High Temperature High Humidity Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Low Temperature Storage Test High Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Test Condition Operating Life Test Test Item Reliability Test: MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Reference Standard Page 5/5 PART NO. LSE42240-PF