LSD511-21-XX LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET LSD511/21-XX SINGLE DIGIT LED DISPLAY (0.56 Inch) 19 - Jan DOC. NO : QW0905- REV. : A DATE : - 2005 LSD511/21-XX
8.0 (0.315") 4.2±0.5 15.2 (0.598") 19.0 (0.748") LSD511/21-XX LIGITEK 0.51 TYP. 2.3 2.54X2 PIN NO.1 14.2 (0.56") 12.5 (0.492") ψ1.6(0.063") 2.3 1/7Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. Package Dimensions LSD511/21-XX Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25(0.01") unless otherwise noted. 2.Specifications are subject to change without notice. DP B D E F C G A
3,8 G DP 10 5 EDCB 26 41 9 FA G DP 510 DEBC 9146 2 FA LSD5111-XX 3,8 LSD511/21-XX 2/7 PART NO. Internal Circuit Diagram LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page
PART NO. PIN NO. LSD5111-XX PIN NO. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
H 40 mW mA mA UNITSymbol IF IFP PD Parameter LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Ratings Absolute Maximum Ratings at Ta=25 ℃ Forward Current Per Chip Power Dissipation Per Chip Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) PART NO. 2:1 IV-MIv(mcd)Vf(v) Electrical Typ.Min. 0.50.2 Typ.Min. 2.11.7 2.6 Max. Topr Tstg 90697 common cathode or anode λP (nm) (nm) CHIP Emitted Red GaP Material -25 ~ +85 -25 ~ +85 Common Cathode Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Part Selection And Application Information(Ratings at 25 )℃ Solder Temperature 1-16 Inch Below Seating Plane For 3 Seconds At 260 ℃ PART NO LSD5121-XX LSD5111-XX Storage Temperature Operating Temperature μA10Ir Reverse Current Per Any Chip
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only If=20mA Test Condition If=20mA If=20mA If=10mA voltVf Unit nm μA nm λP Iv mcd PART NO. Reverse Current Any Chip Spectral Line Half-Width Forward Voltage Per Chip Peak Emission Wavelength Luminous Intensity Per Chip Parameter Test Condition For Each Parameter Symbol Luminous Intensity Matching Ratio IV-M Ir Vr=5V
Relative Intensity@20mA 600 0.0 0.5 Wavelength (nm) 700 800 900 Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 1.0 0.9 1.1 1.2 0.5 Relative Intensity@20mA Normalize @25℃ -20 Ambient Temperature(℃) 806040200- 4 0 100 0.0 806002 04 0 1 0 0 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve 100 Forward Current(mA)0.1 1.0 1.0 1000 H CHIP Relative Intensity Normalize @20mA Forward Voltage(V) 0.0 1.5 1.0 0.5 2.0 2.5 Forward Current(mA) 10 100 1000 Fig.2 Relative Intensity vs. Forward Current 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1000 6/7PART NO. PageLSD511/21-XX
MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 JIS C 7021: B-12 Test ConditionTest Item Operating Life Test High Temperature Storage Test Low Temperature Storage Test 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) PART NO. Reliability Test: This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only The purpose of this is the resistance of the device which is laid under ondition of hogh temperature for hours. MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test High Temperature High Humidity Test Solder Resistance Test (10min) (10min) 2.total 10 cycles 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hous. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.