LSD1505/65F-XX-PF

LSD1505-65F-XX-PF LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET LSD1505/65F-XX-PF Lead-Free Parts Pb SINGLE DIGIT LED DISPLAY (1.5 Inch) DOC. NO : QW0905- REV. : DATE : LSD1505/65F-XX-PF - 200811 - Jul. C

Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LSD1505/65F-XX-PF Package Dimensions PART NO. Page1/8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 40.64 (1.600") 46.9 (1.846") 12.5 (0.492") 38.0 (1.5") 2.54X4=10.16 (0.4") 0.51 TYP PIN NO.1 LSD1505/65F-XX LIGITEK 33.1 (1.303") 5.0±0.5 4.4(0.17")PIN 1 PIN 5 PIN 10 PIN 6

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Internal Circuit Diagram 2/8Page DPG FECB D 2 96 4 3 10 DPG FECB D 2964 3 10 LSD15065F-XX-PF 1,5 A A LSD15055F-XX-PF 1,5 LSD1505/65F-XX-PF PART NO.

PIN NO. 10. Cathode 10. 7.A LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Common Anode LSD15065F-XX-PF Common Cathode LSD15055F-XX-PF Cathode 3. D PIN NO. Page 3/8 Anode E Anode D Anode C Common Cathode Anode B Anode A Anode DP Anode F Anode G Cathode E Cathode C Common Anode Cathode B Cathode DP Cathode F G Cathode LSD1505/65F-XX-PF PART NO.

Chip (Duty 1/10,0.1ms Pulse Width) Power Dissipation Per Chip Forward Current Per Chip Absolute Maximum Ratings at Ta=25 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only μA Min. Typ. Iv(mcd) IV-M 50312:1 -25 ~ +85 -25 ~ +85 Ir Topr Tstg Operating Temperature Storage Temperature Reverse Current Per Any Chip Max.Typ. Vf(v)△λ (nm) Min. 2.41.81.520 λD (nm) common cathode or anode 630 Common Cathode Common Anode CHIP Material PART NO AlGaInP LSD15055F-XX-PF Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Red Emitted Part Selection And Application Information(Ratings at 25)℃ Electrical Electrostatic Discharge( * )ESD2000 V Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LSD1505/65F-XX-PF PART NO. LSD15065F-XX-PF

Test Condition For Each Parameter nm mcd nm μA λD Iv Ir IV-M Luminous Intensity Per Chip Dominant Wavelength Spectral Line Half-Width Reverse Current Any Chip Luminous Intensity Matching Ratio Forward Voltage Per Chip Vf volt Vr=5V If=10mA If=20mA If=20mA Test Condition If=20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LSD1505/65F-XX-PF PART NO.

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Wavelength (nm) Relative Intensity@20mA 0.0 550600 0.5 Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 40020 1.1 1.0 0.9 1.2 700650 Ambient Temperature(℃) Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ 0.5 -401008060 0.0 0-20 406020 1.5 1.0 2.0 2.5 3.0 80100 Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve Forward Current(mA) 100 2.01.0 0.1 3.0 1.0 SRF CHIP 1000 Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA 1.04.05.0 0.0 0.5 1.0 1.5 2.0 Forward Current(mA) 10100 2.5 3.0 1000 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 6/8PageLSD1505/65F-XX-PF PART NO.

Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260°C

60 Seconds Max

Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 25° 0° 0 260° 120° Temp(°C) 2°/sec max Preheat 50 100 260°C3sec Max 5°/sec max Time(sec) 150 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 °C 2.Wave Soldering Profile LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/8LSD1505/65F-XX-PF PART NO.

MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec (10min) (10min) 2.total 10 cycles Solderability Test Solder Resistance Test Thermal Shock Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-202:103B JIS C 7021: B-11 Reliability Test: 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs) Test Condition Low Temperature Storage Test High Temperature Storage Test High Temperature High Humidity Test Operating Life Test Test Item The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this test is the resistance of the device under tropical for hours. This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. Description Reference Standard Page8/8LSD1505/65F-XX-PF PART NO.