LPT2020-A-PF-18 LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

NPN SILICON PHOTOTRANSISTOR LED LAMPS Pb Lead-Free Parts LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET LPT2020/A-PF-18 DOC. NO : QW0905- REV. : DATE : - 201603 - Aug. LPT2020/A-PF-18 A 發行 DCC 立碁電子

VV(BR)ECO Emitter-Collector Breakdown Voltage On State Collector Current Collector Dark Current Collector-Emitter Saturation Voltage Fall Time Rise Time ICEO Ip(on) VCE(sat) Tf Tr VCE=30V IC=800μA,RL=1KΩ VCE=10V Ee=0mw/c㎡nA mA mA mA mA VCE=5v Ee=1mw/c㎡ λP=940nm μs V Ic=0.5mA Ee=20mw/c㎡ -50 TO +100℃ ℃ MAXIMUM RATINGS Collector-Emitter Breakdown Voltage PARAMETER ELECTRICAL CHARACTERISTICS(Ta=25)•℃ Storage Temperature Operating Temperature Emitter-Collector Voltage Collector-Emitter Voltage Power Dissipation MAXIMUM RATINGS(Ta=25)•℃ Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted 2.Specifications are subject to change without notice V(BR)CEO SYMBOL PARAMETER 100 Package Dimension TEST CONDITION V UNIT Ic=1mA Ee=0mw/c㎡ V V UNIT mw

Features

. High illumination sensitivity . Stable characteristics . Spectrally and mechanically matched with IR emitter

Description

The LPT2020/A-PF-18 series are silicon nitride passivated NPN planar phototransistors with exceptionally stable characteristics and high illumination sensitivity the cases of LPT2020/A-PF-18 are encapsulated in water clear plastic T1 3/4 package individuallt -50 TO +100℃ ℃ 0.4 μs 100 IE=100μA Ee=0mw/c㎡ Max.Typ.Min. LPT2020/A-PF-18 PART NO. Page 1/4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.5 MAX □0.5 TYP 3.0 4.0 4.2 5.2 1.0MIN 1 2 2.3TYP 12.5MIN 1.EMITTER 2.COLLECTOR

2.Wave Soldering Profile Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 150 Time(sec) 260°C3sec Max 260° Temp(°C) 2°/sec max 10050Preheat 120° 25° 00° Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 5°/sec max Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body)

60 Seconds Max

PART NO. LPT2020/A-PF-18

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Test Condition 1.Ta=85℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) (10min) (10min) 2.total 10 cycles This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this test is the resistance of the device under tropical for hours. The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. Reference StandardTest Item Reliability Test: Operating Life Test Low Temperature Storage Test High Temperature Storage Test Thermal Shock Test High Temperature High Humidity Test MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 1.T.Sol=245 ℃±5℃ 2.Dwell time=5 ±1sec 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to see soldering well performed or not. Solder Resistance Test Solderability Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. PART NO. LPT2020/A-PF-18

4/4Page PACKING SPECIFICATION H L W 2. 8 BAG / INNER BOX SIZE : L X W X H 33cm X 18cm X 9cm

1.1000 PCS / BAG

L C/NO: MADE IN CHINA ITEM NO. Q'TY: PCS N,W,: kgs G,W,: kgs H 3. 12 INNER BOXES / CARTON SIZE : L X W X H 58.5cm X 34cm X 34cm W