LPQ172 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
175 Watts
Total Power: 110 - 175 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Quad SPECIAL FEATURES Active power factor correction IEC EN61000-3-2 compliance Adjustable outputs on 1, 3 & 4 Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Overvoltage protection Overload protection Thermal overload protection DC power good 5 V standby output Adjustable floating 4th output Optional cover (-C suffix) RoHS compliant SAFETY UL UL60950 CB Certificate and report CSA CSA 22.2-234 Level 3 CE Mark (LVD) NEMKO EN 60950/EMKO-TUE Electrical Specifications Input Input range 85-264 Vac; 120-300 Vdc Frequency 47-67 Hz Inrush current 38 A max, cold start @ 25°C Efficiency 75% typical at full load EMI filter Meets FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Power factor 0.99 typical Safety ground leakage current 1.0 mA @ 50/60 Hz, 264 Vac input Output Maximum power
110 W convection (75 W with cover)
85 W convection - LPQ173
175 W with 30 CFM forced air
(130 W with cover - LPQ172) Adjustment range 3.3 - 5.5V on main; -12 - 15V on 3rd output 3.3 - 25 V on 4th output - LPQ172 3.3 - 5.5 V on 4th output - LPQ173 Hold-up time 20 ms @175 W load at nominal line Overload protection Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating Overvoltage protection Tracks outputs 1, 3 & 4; 15 to 35% Standby output 5 V @ 200 mA regulated ±5% Data Sheet
AC power failure TTL logic signal goes high 100 - 500 msec after V1 output; It goes low at least 4 msec before loss of regulation Remote inhibit -40 °C to +85 °C Electromagnetic susceptibility Requires contact closure to inhibit outputs Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. DC - OK TTL logic signal goes high after main output is in regulation. It goes low when there is a loss of regulation. Environmental Specifications Operating temperature 0 °C to 50 °C ambient. Derate each output 2.5% per degree from 50 °C to 70 °C (except for -C version). Storage temperature -40 °C to +85 °C Temperature coefficient ±0.4% per °C Electromagnetic susceptibility Designed to meet IE61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Humidity Operating; non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to
500 Hz, operational
MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions
Ordering Information
Peak Load1 Regulation2 Ripple P/P(PARD)3 LPQ172 5 V (3.3 - 5.5 V) 0 A 15 A 30 A 32 A ±2% 50 mV
12 V 0 A 6 A 8 A 10 A ±3% 120 mV
-12 V (-12 -15 V) 0 A 1.5 A 3 A 3.5 A ±3% <1% ±3.3-25 V 0.5 A* 2 A 5 A 5.5 A ±3% <50mV or 1% LPQ173 5 V (3.3 - 5.5 V) 0 A 10 A 24 A 26 A ±2% 50 mV 5 V (3.3 - 5.5 V) 0 A 10 A 24 A 26 A ±2% 50 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. 4th output adjustable 3.3 - 25 V factory set at 5 V. 5. *Minimum loads are required when output set below 5 Volts 6. Remote inhibit resets OVP latch 7. LPQ173-C has no convection rating. 8. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Note: -C suffix added to the model number indicates cover option and is limited to 50 °C operation.
Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02”. 3. Specifications are for convection rating at factory settings unless otherwise stated. 4. Mounting screw maximum insertion depth is 0.12”. 5. Warranty: 2 years 6. Weight: 2 lb/0.91 kg
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com LPQ170 Series-DS 18Mar2016 Pin Assignments Connector LPQ172 LPQ173 SK1 PIN 1 N/C V4 SWP PIN 2 5V Standby 5 V Standby PIN 3 N/C +V4 Sense PIN 4 V1 SWP V1 SWP PIN 5 Common Common PIN 6 +V1 sense +V1 sense PIN 7 Sense common Sense common PIN 8 Remote inhibit Remote inhibit PIN 9 DC power good DC power good PIN 10 POK POK SK2 PIN 1,2 +12 V +12V PIN 3,4,5 Common Common PIN 6 -12 V -12V PIN 7 POK POK PIN 8 +3.3 V to +25 V (Float) N/C PIN 9 Common (Float) N/C SK3 TB-1, 3 COMMON COMMON TB-2 +5 V (3.3V to 5.5V) +5V (3.3V to 5.5V) TB-4 N/C +5V (3.3V to 5.5V) SK4 PIN 1 GROUND GROUND PIN 3 LINE LINE PIN 5 NEUTRAL NEUTRAL Mating Connectors (SK4) AC Input Molex 09-50-8051 (USA) Molex 09-91-0500 (UK) PINS: 08-58-0111 (SK3) Main output Molex series 19141-0058/0063 (SK2) Aux DC Output/Power fail Molex 09-50-8091 (USA) Molex 09-91-0900 (UK) PINS: 08-58-0111 (SK1) Control Signals Molex 90142-0010 (USA) PINS: 90119-2110 or Amp: 87977-3 PINS: 87309-8 Astec connector kit #70-841-015, includes all of above