LPGF9033-TR2

LPGF9033-TR2 LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

SURFACE MOUNT TYPE AND REEL LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET DOC. NO : QW0905-LPGF9033/TR2 REV. : A DATE : 18 - Nov. - 2009 LPGF9033/TR2 發行 DCC 立碁電子

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Cathode 0.5±0.1 ψ1.9 Page1/7 Package Dimensions 0.4±0.1 2.5 1.4 LPGF9033/TR2PART NO. 5.8±0.5 3.05±0.5 2.0 t Po E Ko F Carrier Type Dimensions Cathode Do W Polarity Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. P 0.7 4.3±0.5 2.8

PART NO. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reel Dimensions 16.0±1.0 Page 2/7 14.2±1.0 74.0±1.5 DescriptionPart No. LPG9033/TR2 12.0mm tape,7"reel Quantity/Reel 1500 devices ψ178±2.0 LPGF9033/TR2

Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Absolute Maximum Ratings at Ta=25 ℃ IFP PD IF Tstg Topr Symbol Typical Electrical & Optical Characteristics (Ta=25 ℃) Power Dissipation Reverse Current @5V Storage Temperature Operating Temperature Parameter Peak Forward Current Duty 1/10@10KHz Forward Current -40 ~ +100 -40 ~ +85 Ir10 Ratings PGF mW μA mA mA UNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page3/7 Viewing angle 2θ 1/2 (deg) Min. Min. 1.7 Forward voltage @ mA(V) Max. 2.6 Peak wave length λPnm 558 Spectral halfwidth △λnm Typ. Luminous intensity @20mA(mcd) 120 Emitted Green PART NO LPGF9033/TR2 MATERIAL AlGaInP Lens COLOR Water Clear PART NO. LPGF9033/TR2 Electrostatic Discharge( * ) ESD2000 V

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Fig.4 Relative Intensity vs. Temperature Typical Electro-Optical Characteristics Curve Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PGF CHIP Fig.6 Directive Radiation Page4/7 PART NO. 100% -60° 60° 30°-30° LPGF9033/TR2

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Soldering heat Max. 260℃ 245±5℃ within 5 sec Preheat 2. Wave Solder 120 ~ 150℃ 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Recommended Soldering Conditions 120 ~ 180 sec Page 5/7PART NO. Cooling -5℃/sec Rising +5℃/sec 5sec 1~5°C/sec Time 3-1. LEAD Reflow Solder Temp. (℃) 150 240 3-2 PB-Free Reflow Solder 120 60 ~ 120 sec Preheat Preheat 180~200°C Above 220 °C 60 sec.Max. 120 sec.Max. 1~5°C/sec Note:1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 260°C MaX. 10sec.Max LPGF9033/TR2

Page 6/7PART NO. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH<60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH<60%, they should be treated at 60℃±5 ℃fo r 15hrs. LED Circuit model B LED Circuit model A ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. LPGF9033/TR2

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 MIL-STD-883D:1008 JIS C 7021: B-10 Reference Standard Reliability Test: Operating Life Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Endurance Test High Temperature Storage Test Test ItemClassificationTest Condition 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) PART NO. Page 7/7 MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 High Temperature High Humidity Storage Test 1.IR-Reflow In-Board,2 times 2.Ta=105 ℃±5℃& -40℃±5℃ (10min) (10min) 3.total 10 cycles Thermal Shock Test 1.IR-Reflow In-Board, 2 Times 2.Ta=65℃±5℃ 3.RH=90%~95% 4.t=1000hrs ±2hrs Solderability Test Environmental Test Temperature Cycling 30mins 5mins 30mins 5mins

2.10 Cyeles

1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Immersion rate 25 ±2.5mm/sec 4.Immersion rate 25 ±2.5mm/sec 5.Coverage ≧95% of the dipped surface Solderability Test Ramp-up rate(183 ℃ to Peak) +3 ℃ second max Temp. maintain at 125( ±25)℃ 120 seconds max Temp. maintain above 183 ℃ 60-150 seconds Peak temperature range 235 ℃+5-0℃ Time within 5 ℃ of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 ℃/second max MIL-STD-750D:2031.2 J-STD-020 Low Temperature Storage Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 LPGF9033/TR2