LI3630 LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
DOC. NO : QW0905-LI3630 REV. : A DATE : 28 - Jun - 2005 DATA SHEET ROUND TYPE LED LAMPS LI3630 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
□0.5 TYP 25.0MIN -60° 75%75%100% 50% 25% 0 25% 50% 100% 60° Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation 30°-30° 2.54TYP 1.0MIN 13.5 2.01.5MAX Package Dimensions 10.0 11.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LI3630 Page 1/4
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Typical Electrical & Optical Characteristics (Ta=25 ℃) Absolute Maximum Ratings at Ta=25 ℃ Storage Temperature GaAsP/GaP LI3630 Orange Emitted MATERIALPART NO Soldering Temperature Forward Current IF Reverse Current @5V Operating Temperature Ir Peak Forward Current Duty 1/10@10KHz Power Dissipation Parameter PART NO. LI3630 ℃-40 ~ +100 Viewing angle 2θ 1/2 (deg) Peak wave length λPnm 635 45 1.7 2.6 8.0 18 Max.Min. Typ.Min. Spectral halfwidth △λnm Forward voltage @20mA(V) Luminous intensity @10mA(mcd) Max 260℃ for 5 sec Max (2mm from body) mA30 mW mA μA10 -40 ~ +85 120 100 UNIT Ratings I Page 2/4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 550 600 0.0 0.5 1.0 2.0 3.0 4.0 5.0 80 100 0.8 0.9 -20-40 402008 0 1 0 0 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 700 750 Page3/4 PART NO. LI3630
MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202:103B JIS C 7021: B-11 This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to see soldering well performed or not. 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs (10min) (10min) 2.total 10 cycles 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Thermal Shock Test Solder Resistance Test High Temperature High Humidity Test The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hous. MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Operating Life Test This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) Low Temperature Storage Test High Temperature Storage Test The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. Test ConditionTest Item Reliability Test: Description Reference Standard LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LI3630 Page 4/4