LI2340-PF LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
DOC. NO : QW0905- REV. : A DATE : - 200716 - Jul. LI2340-PF DATA SHEET LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ROUND TYPE LED LAMPS LI2340-PF Lead-Free Parts Pb
25.0MIN □0.5 TYP 50% -30° Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. -60° 100%75% Directivity Radiation 60° 0 25%25%50%75%100% 30° 2.54TYP + - 1.0MIN 1.5MAX LI2340-PFPART NO. Package Dimensions 1/5Page 5.0 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
Absolute Maximum Ratings at Ta=25 ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) mA120IFP Peak Forward Current Duty 1/10@10KHz Max. Forward voltage @20mA(V)COLOR Red Diffused Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Emitted LI2340-PFGaAsP/GaP Orange MATERIALPART NO Min.Lens 635451.72.6 Peak wave length λPnm Spectral halfwidth △λnm Reverse Current @5V Power Dissipation Operating Temperature Storage Temperature Tstg Topr PD Ir -40 ~ +85 -40 ~ +100 100 Min. Typ. 208.080 Viewing angle 2θ 1/2 (deg) Luminous intensity @10mA(mcd) mW μA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Symbol Forward Current Parameter IF I Ratings UNIT mA Page 2/5 PART NO. LI2340-PF
Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 550 600 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-40 4020080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 700750 E - I CHIP Page3/5 PART NO. LI2340-PF
Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) 5°/sec max Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.
60 Seconds Max
0°0 25° 120° Preheat 50 100 2°/sec max Temp(°C) 260° 260°C3sec Max Time(sec) 150 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 °C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Page 4/5 PART NO. LI2340-PF
Description
The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this test is the resistance of the device under tropical for hours. This test intended to see soldering well performed or not. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs (10min) (10min) 2.total 10 cycles 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. High Temperature High Humidity Test Solder Resistance Test Thermal Shock Test Low Temperature Storage Test High Temperature Storage Test Test Condition 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Reliability Test: Operating Life Test Test Item MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Reference Standard 5/5Page PART NO. LI2340-PF