LI13743-PF LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

DOC. NO : QW0905-LI13743-PF REV : A DATE : 02 - Aug. - 2006 DATA SHEET Lead-Free Parts LI13743-PF ROUND TYPE LED LAMPS Pb LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only

PART NO. LI13743-PF Directivity Radiation Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 5.95.0 25.0MIN □0.5 TYP 1.0MIN 2.54TYP + - 7.6 8.6 1.5MAX Page 1/5 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only

Absolute Maximum Ratings at Ta=25 ℃ Emitted Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Typical Electrical & Optical Characteristics (Ta=25 ℃) MATERIALPART NO LI13743-PF GaAsP/GaP Orange Reverse Current @5V Storage Temperature Operating Temperature Power Dissipation Peak Forward Current Duty 1/10@10KHz Forward Current Parameter Viewing angle 2θ 1/2 (deg) Luminous intensity @10mA(mcd) Peak wave length λPnm Spectral halfwidth △λnm Forward voltage @20mA(V) Water Clear 45635 Lens 2.61.765 30 Min.Min.Max. Typ. COLOR μA10Ir -40 ~ +85 -40 ~ +100Tstg Topr PD IFP 100 mW 120 mA Page 2/5 Ratings IF Symbol I 30 mA UNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LI13743-PF

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 550 600 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-40 4020080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 700750 E - I CHIP Page3/5 Fig.6 Directivity Radiation PART NO. LI13743-PF

Temp(°C)

60 Seconds Max

25° Preheat 50 2°/sec max 120° 260° Time(sec) 100 150 5°/sec max 260°C3sec Max Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/5 PART NO. LI13743-PF

This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hours. This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under condition of high temperature for hours.

Description

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Solderability Test Solder Resistance Test (10min) (10min) 2.total 10 cycles 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs Thermal Shock Test High Temperature High Humidity Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Low Temperature Storage Test High Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Test Condition Operating Life Test Test Item Reliability Test: MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Reference Standard 5/5Page PART NO. LI13743-PF