LHY3333-H0 LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SUPER BRIGHT ROUND TYPE LED LAMPS DOC. NO : QW0905-LHY3333/H0 REV. : A DATE : 26 - Oct. - 2005 DATA SHEET LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LHY3333/H0

Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 75%100% 60° 1.5MAX □0.5 TYP 5.95.0 8.67.6 25.0MIN 1.0MIN 2.54TYP + - Directivity Radiation Package Dimensions PART NO. LHY3333/H0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/4 30°-30° 25%75%100%50% -60° 50%25%0

V2000ESD Electrostatic Discharge( * ) Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Typical Electrical & Optical Characteristics (Ta=25 ℃) AlGaInP MATERIAL LHY3333/H0 PART NO Yellow Water Clear COLOR EmittedLens Spectral halfwidth △λnm Forward voltage @20mA(V) Viewing angle 2θ 1/2 (deg) Luminous intensity @20mA(mcd) Dominant wave length λDnm 2.61.715595 Max. 150038700 Typ.Min. Topr Operating Temperature Soldering Temperature Tsol Tstg Reverse Current @5V Ir ℃-40 ~ +85 Max 260℃ for 5 sec Max (2mm from body) -40 ~ +100 ℃ 10 μA Min. Peak Forward Current Duty 1/10@10KHz Power Dissipation Forward Current PD IFP IF mW mA mA Absolute Maximum Ratings at Ta=25 ℃ Parameter Symbol Page 2/4 Ratings HY UNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LHY3333/H0 Storage Temperature Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded.

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 500 550 600 0.0 0.5 1.0 1.52.02.53.0 80100 0.8 0.9 -20-40 4020080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 HY CHIP Page3/4 PART NO. LHY3333/H0

This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test This test intended to see soldering well performed or not. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only The purpose of this test is the resistance of the device under tropical for hous. Thermal Shock Test High Temperature High Humidity Test High Temperature Storage Test Low Temperature Storage Test Operating Life Test The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. (10min) (10min) 2.total 10 cycles 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. Reliability Test: Test ItemTest Condition Description MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Page 4/4 Reference Standard PART NO. LHY3333/H0