LHRF12343-S3-A-PF LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
DOC. NO : QW0905-LHRF12343/S3/A-PF REV. : A DATE : 11 - Sep. - 2013 DATA SHEET Lead-Free Parts LHRF12343/S3/A-PF SUPER BRIGHT ROUND TYPE LED LAMPS Pb LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 發行 DCC 立碁電子
+ - 1/6PageLHRF12343/S3/A-PF Package Dimensions PART NO. 3.0 3.3 4.1 2.54TYP 1.0MIN 25.0MIN □0.5 TYP 1.5MAX 3.8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Directivity Radiation Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 50%100% 75% -60° -30 25%025%75% 50%100% °60 °30
1.5 2.4RedAlGaInPLHRF12343/S3/A-PF Water Clear COLOR Lens MATERIALPART NO Emitted 550 Luminous intensity @20mA(mcd) Typ. Spectral halfwidth △λnm 630 Dominant wave length λDnm Max. Forward voltage @ mA(V) Min. 300 Min. Viewing angle 2θ 1/2 (deg) Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only UNIT mA mA μA V mW HRF Ratings 2000 Ir -40 ~ +85 -40 ~ +100 Forward Current Peak Forward Current Duty 1/10@10KHz Parameter Operating Temperature Storage Temperature Electrostatic Discharge( * ) Reverse Current @5V Power Dissipation Typical Electrical & Optical Characteristics (Ta=25 ℃) Symbol ESD Topr Tstg IF PD IFP Absolute Maximum Ratings at Ta=25 ℃ Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. PART NO. LHRF12343/S3/A-PF
Luminous Intensity(mcd) at 20 mA Group 700A20 350A17 A19 A18 550 450 A16 300 Min. LHRF12343/S3/A-PFPART NO. Bin Code HRF CHIP Brightness Code For Standard LED Lamps 900 450 700 550 350 Max. Page 3/6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
1.0 Relative Intensity@20mA Normalize@25℃ 600550650700 Relative Intensity@20mA Wavelength (nm) 1.0 0.5 0.9 0.8 Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) -20-4020 -080 6040100 Ambient Temperature(℃) -0-40 -20 0.5 20406080100 1000 Fig.2 Relative Intensity vs. Forward Current Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Fig.3 Forward Voltage vs. Temperature 1.2 1.1 1.0 100 1.0 0.1 Forward Current(mA) Forward Voltage(V) Forward Current(mA) 2.0 1.5 2.5 Fig.4 Relative Intensity vs. Temperature 3.0 1.0 Relative Intensity Normalize @20mA 1.0 0.5 100 2.0 1.5 3.0 2.5 1000 Fig.1 Forward current vs. Forward Voltage PART NO. LHRF12343/S3/A-PF HRF CHIP Typical Electro-Optical Characteristics Curve 3.5
Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. Page 5/6 2.Wave Soldering Profile LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) Time(sec) 150 260°C3sec Max 100 5°/sec max 50Preheat 2°/sec max 260° 120° 0°0 25° Temp(°C) PART NO. LHRF12343/S3/A-PF
This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hours. This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.
Description
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs High Temperature High Humidity Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Solder Resistance Test 1.T.Sol=245 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test (10min) (10min) 2.total 10 cycles Thermal Shock Test 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) High Temperature Storage Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Low Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Test Condition Operating Life Test Test Item Reliability Test: Reference Standard MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Page 6/6 PART NO. LHRF12343/S3/A-PF