LHRDBK2092-R5 LIGITEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DUAL COLOR LED LAMPS DATA SHEET LHRDBK2092/R5 - 2010 A 11- Feb. DOC. NO : QW0905- REV. : DATE : LHRDBK2092/R5 發行 DCC 立碁電子

PART NO. LHRDBK2092/R5 Package Dimensions Page 1/6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Directivity Radiation Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 4.2 5.2 6.7±0.5 1 2 3 18.0MIN 2.0MIN 2.54TYP2.54TYP 2.0MIN 1.ANODE BLUE 2.COMMON CATHODE 3.ANODE RED □0.5 TYP 1.5 MAX 321 DBK HR 3.0 4.0 25%50%75%100% 25%0 -60° 100%50%75% 60° -30° 30°

Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Page 2/6 UNITSymbolParameter Absolute Maximum Ratings at Ta=25 ℃ Absolute Maximum Ratings LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only mA mA μA V---- mW IF IFP Forward Current Peak Forward Current Duty 1/10@10KHz Ir ESD Reverse Current @5V Electrostatic Discharge( * ) PD Power Dissipation ℃-30 ~ +100Tstg Storage Temperature Typical Electrical & Optical Characteristics (Ta=25 ℃) Viewing angle 2θ 1/2 (deg) Spectral halfwidth △λnm Luminous intensity @20mA(mcd) Forward voltage @20mA(V) LensEmitted --- Red LHRDBK2092/R5 COLOR MATERIALPART NO Dominant wave length λDnm Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. InGaN/GaN Blue 550350604.03.5----30470 Topr Operating Temperature ℃-20 ~ +80 HR 100 100 500 120 100 DBK Peak wave length λPnm

660 GaAlAs

--- PART NO. LHRDBK2092/R5 White Diffused

Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity@20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.5 -40-20-020 600650 2.03.04.05.0 4060 0.8 -0-20-404060 20 0.5 0.9 1.0 1.1 1.2 1.0 1.5 2.0 650700750 0.5 1.0 1.0 1.5 2.0 2.5 3.0 10080100 80 2.5 3.0 HR CHIP Page3/6 PART NO. LHRDBK2092/R5

3.0 2.5 Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 1000100 2.0 1.5 1.0 0.5 0.0 1015.02.0 Forward Voltage(V) Forward Current(mA) Forward Current(mA) Relative Intensity Normalize @20mA 3.01.2 Fig.3 Forward Voltage vs. Temperature 2.0 1.0 1.5 1.1 0.9 1.0 2.5 Fig.4 Relative Intensity vs. Temperature 408010060 0.0 20406080100-20 -400 0.8 -40-200 Ambient Temperature(℃) Ambient Temperature(℃) Forward Voltage@20mA Normalize @25℃ Relative Intensity@20mA Normalize @25℃ 0.5 0.5 550500400 0.0 450 Wavelength (nm) Relative Intensity@20mA 1.0 0 1 4.03.01.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Electro-Optical Characteristics Curve Fig.5 Relative Intensity vs. Wavelength PART NO. LHRDBK2092/R5

60 Seconds Max

Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 °C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/6

0 Preheat

25° 2°/sec max 10050 150 Time(sec) Temp(°C) 120° 260° 5°/sec max 260°C3sec Max PART NO. LHRDBK2092/R5 Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reliability Test: MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Operating Life Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Low Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) High Temperature Storage Test This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. Test ConditionTest Item Description Reference Standard MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs (10min) (10min) 2.total 10 cycles Thermal Shock Test High Temperature High Humidity Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Solder Resistance Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hours. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to see soldering well performed or not. PART NO. LHRDBK2092/R5