LHR8UG2043-L1-PF LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LHR8UG2043/L1-PF DATA SHEET - 2011 A 19- Aug. DOC. NO : QW0905- REV. : DATE : LHR8UG2043/L1-PF SUPER BRIGHT ROUND TYPE LED LAMPS 發行 DCC 立碁電子
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. Package Dimensions LHR8UG2043/L1-PF Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 25.0MIN □0.5 TYP 1.0MIN 2.54TYP 1.5MAX 5.2 4.2 4.03.0 60° 30° 100%50%025%75% -30° -60° 50%100%75%25% Directivity Radiation 8UG HR + - + -
℃Tstg -40 ~ +100 Storage Temperature White Diffused Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. AlGaInP Green 20 2.61.7 30016030 Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO Spectral halfwidth △λnm Dominant wave length λDnm COLOR Emitted AlGaInP Red MATERIAL Lens Viewing angle 2θ 1/2 (deg) Forward voltage @20mA(V) Luminous intensity @20mA(mcd) Max.Min. Typ.Min. 1.52.42850 30 Electrostatic Discharge( * ) Operating Temperature Forward Current Reverse Current @5V Peak Forward Current Duty 1/10@10KHz Power Dissipation Absolute Maximum Ratings at Ta=25 ℃ IFP 10075 mA -40 ~ +85Topr Ir PD100 ESD μA V mW65 2000 Ratings Parameter Symbol IF 30 HR UNIT mA25 8UG LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page2/6LHR8UG2043/L1-PFPART NO. 574 660 LHR8UG2043/L1-PF
Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity@20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.5 -40-20-020 600650 2.03.04.05.0 4060 0.8 -0-20-404060 20 0.5 0.9 1.0 1.1 1.2 1.0 1.5 2.0 650700750 0.5 1.0 1.0 1.5 2.0 2.5 3.0 10080100 80 2.5 3.0 HR CHIP Page4/6 PART NO. LHR8UG2043/L1-PF
Fig.4 Relative Intensity vs. Temperature 0.5 1.0 1.5 2.0 2.5 Relative Intensity @20mA Wavelength (nm) 500 0.5 550 600 650 Fig.3 Forward Voltage vs. Temperature Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Forward Voltage@20mA Normaliz @25℃ 1.0 -20 0.8 0.9 1.0 1.1 1.2 Relative Intensity @20mA Normalize @25℃ 40206080 Ambient Temperature(℃) 0-2020406080 Fig.2 Relative Intensity vs. Forward Current LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 2.0 Typical Electro-Optical Characteristics Curve PART NO. LHR8UG2043/L1-PF Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) 0.5 8UG CHIP Relative Intensity Normalize @20mA Page 4/6 1000 Forward Current(mA) 1.010100
Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 5°/sec max 2°/sec max
60 Seconds Max
25° 0° 0 Preheat 50 120° 100 260° Temp(°C) 260°C3sec Max 150 Time(sec) Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/6LHR8UG2043/L1-PFPART NO.
1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) (10min) (10min) 2.total 10 cycles 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Test Condition Solder Resistance Test Solderability Test Thermal Shock Test High Temperature High Humidity Test 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs High Temperature Storage Test Low Temperature Storage Test Operating Life Test Reliability Test: Test Item MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this test is the resistance of the device under tropical for hours. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202:103B JIS C 7021: B-11 The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 Page 6/6 Description Reference Standard LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LHR8UG2043/L1-PFPART NO.