LHEL9553-T10-A01 LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
SURFACE MOUNT LED TAPE AND REEL Lead-Free Parts LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Pb DOC. NO : QW0905-LHEL9553/T10-A01 REV. : A DATE : 04 - Mar. - 2016 LHEL9553/T10-A01 發行 DCC 立碁電子
Features: 1. Top view LED. 2. white SMT package. 3. Leadframe package with individual 2 pin. 4.Wide viewing angle. 5.Soldering methods:IR reflow soldering. 6.Feature of the device:more light due to higher optical efficiency;extremely wide viewing angle;ideal for backlighting and coupling in light guide. Descriptions: The L HEL9553 SMD has wide viewing angle and optimized light coupling by inter reflector,The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications: 1. Telecommunication: indicator and backlighting in telephone and fax. 2. Indicators. 3. Switch lights. COLOR LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LHEL9553/T10-A01 AlGaInP Orange Device Selection Guide: PART NO MATERIAL Emitted PART NO. LHEL9553/T10-A01 Water Clear Lens Page 1/11
Recommended Soldering Pad Dimensions Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm. Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 4.5 1.5 2.6 1.5 Package Dimensions 3.2 0.9 3.5 0.9 0.90.91.85 2.8 Cathode Mark Soldering Terminal 2.2 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/11 PART NO. LHEL9553/T10-A01 CathodeAndoe Polarity
Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2.The luminous intensity data did not including ±15% testing tolerance. 3.The dominant wavelength data did not including ±1nm testing tolerance 2.6 ---- ---- 630 380 Typical Electrical & Optical Characteristics (Ta=25 ℃) Max. Spectral Line Half-Width Luminous Intensity Dominant Wavelength Items Viewing Angle Forward Voltage ----220Iv 2θ 1/2 λD VF 20---- 1.7 ---- 120 ---- 615 ---- Symbol Min. Typ. IF=10mAmcd IF=10mA IF=10mA IF=10mA IF=10mA nm deg V nm CONDITIONUNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Ratings Storage Temperature Reverse Current @5V Operating Temperature Electrostatic Discharge Parameter Peak Forward Current Duty 1/11@10KHz Power Dissipation Forward Current Topr Tstg ESD Ir IFP PD Symbol IF Absolute Maximum Ratings at Ta=25 ℃ μA V mA mA mW UNIT Page 3/11 PART NO. LHEL9553/T10-A01 2000 -40 ~ + 85 -40 ~ + 100
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/11 PART NO. LHEL9553/T10-A01 λD(nm) at10mA Dominant Wavelenght Classification BIN CODE Min. Max. 615-620 615 620 620-625 620 625 625-630 625 630 Luminous Intensity Classification Iv(mcd) at 10mA BIN CODE Min. Max. 220220-380 380
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LHEL9553/T10-A01 Page 5/11 75%100% 50%50% 25% 0 25% 100% 75% Fig.6 Directive Radiation -30° -60° 30° 60° Typical Electro-Optical Characteristics Curve Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA Wavelength (nm) 550 600 0.0 0.5 1.0 650 HEL CHIP 700 Fig.4 Relative Intensity vs. Temperature Ambient Temperature( ℃) Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normaliz @25℃ Relative Intensity @20mA Normalize @25℃ Ambient Temperature( ℃) Fig.2 Relative Intensity vs. Forward CurrentFig.1 Forward current vs. Forward Voltage Forward Voltage(V) Forward Current(mA) Relative Intensity Normalize @10mA Forward Current(mA) 2.5 2.0 1.5 1.0 0.5 -20 02 0 6 0 40 80 3.0 2.5 2.0 1.5 1.0 0.5 2.0 100 1.0 0.1 1.0 1000 3.0 4.0 5.0 1.3 1.2 1.1 1.0 0.9 0.8 -20 02 0 6 0 40 80 101.0 100 100 0
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Packing Specifications‧ LHEL9553/T10-A01 Part No. Description 0.4 0.6 0.8 0.2 0.8 0.6 0.4 0.2 Label Note : The tolerances unless mentioned is ±0.1mm,Unit=mm. Carrier Type Dimensions Quantity/Reel Label Page 6/11 PART NO. LHEL9553/T10-A01 2000 PCS8.0mm tape,7"reel 4.0 2.0 4.0 5.4 8.0 ±0.3 2.08ψ1.5 1.75 3.5 3.00 3.66 Polarity
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reel Dimensions LIGITEK ELECTRONICS CO., LTD. BIN/HUE : QTY(PCS): 220-380/620-625 2 0 0 0 LOT : PART : GS1610168 Pb Label Explanation Page 7/11 PART NO. LHEL9553/T10-A01 LUR9553H/TR1/A GS1-080388 1500 T/28 LHEL9553/T10-A01 VF:1.7-2.6 ψ13.5±1.0 0.2 0.4 0.6 0.6 0.4 0.8 0.2 2.0±0.5 60.0±1.0178±1.5 9.0±1.0 12.0±1.0 0.8 HUE : Dominant Wavel ength BIN : Luminous Intensity VF: Forward Voltage
- 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm Box Explanation LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/11 PART NO. LHEL9553/T10-A01 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H L H W
2.When soldering,do not put stress on the LEDs during heating. 1.Reflow soldering should not be done more than two times. 3.After soldering,do not warp the circuit board. Note: Above 220°C 60 sec.Max.
2 PB-Free Reflow Solder
180~200°C 120 sec.Max. 1~5°C/sec 1~5°C/sec 1. Hand Solder Basic spec is ≦ 320℃ 3 sec one time only. 260°C MaX. 10sec.Max 6°C/sec LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Recommended Soldering Conditions Page 9/11 PART NO. LHEL9553/T10-A01
Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. Circuit model A LED LED Circuit model B LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page10/11 PART NO. LHEL9553/T10-A01 Precautions For Use: Storage time: 1. Calculated shelf life before opening is 12 months at < 30°C and < 90% relative humidity (RH) 2. After bag is opened, devices which will be subjected to reflow soldering or other high temperature processes must be a) Assemblied within 168 hours in an environment of ≦ 30°C / 60% RH, or b) Stored at ambient of 10% RH or less 3. Devices are required baking before assembly if: a) Humidity Indicator Card reads >10% (for level 2a -5a) or >60% (for level 2) at ambient temperature 23 ±5°C b) 2.a) or 2.b) doesn't meet 4. If baking is required, devices should be baked for >24 hours at 60±5°C.Performing baking only once, and using the baked devices within 72 hours.
Reliability Test: LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page11/11 PART NO. LHEL9553/T10-A01 Environmental Test 1.T=260°C Max. 10sec.Max. 2. 6 Min IR Reflow 30mins / 5mins / 30mins
2.100 Cyeles
1.Ta=85°C 2.RH=85% 3.t=1000hrs(-24hrs,+72hrs) 1.Ta=-40°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 20min/ 10sec / 20min 2.total 100 cycles High Temperature High Humidity Storage Test Thermal Shock Test Low Temperature Storage Test 1.Ta=100°C±5°C 2.t=1000 hrs (-24hrs,+72hrs) 1.Ta=25°C 2.If=10mA 3.t=1000 hrs (-24hrs,+72hrs) High Temperature Storage Test Test Item Operating Life Test Test Condition Sample Size