LH9033

LH9033 LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

DOC. NO : QW0905-LH9033 REV. : A DATE : 07 - Feb. - 2006 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LH9033 DATA SHEET AXIAL TYPE LED LAMPS Lead-Free Parts Pb

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Package Dimensions Directivity Radiation Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 25%75% -60° 100%25% 50% 0 -30° 75%50% 60° 100% 30° 0.71.4 1.4 0.16 2.5 0.7 7.0MIN 0.4±0.1 PART NO. LH9033 2.0 0.5±0.1 7.0MIN ψ1.92.5 1/6Page

μA H Ratings Symbol IF IFP PD Ir Parameter Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Absolute Maximum Ratings at Ta=25 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Viewing angle 2θ 1/2 (deg) 7.020 Typ. -40 ~ +85 -40 ~ +100 Topr Tstg Operating Temperature Storage Temperature Typical Electrical & Optical Characteristics (Ta=25 ℃) Spectral halfwidth △λnm Forward voltage @20 mA(V) 2.6901.7 Min.Max. Peak wave length λPnm 697 Lens MATERIAL RedGaP Emitted PART NO LH9033 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Water Clear COLOR Luminous intensity @10mA(mcd) 4.5 Min. PART NO. LH9033

Relative Intensity@20mA 600 0.0 0.5 Wavelength (nm) 700800900 Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 1.0 0.9 1.1 1.2 0.5 Relative Intensity@20mA Normalize @25℃ -20 Ambient Temperature(℃) 806040200-40 100 0.0 806002040100 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve 100 Forward Current(mA) 0.1 1.0 1.0 1000 H CHIP Relative Intensity Normalize @20mA Forward Voltage(V) 0.0 1.5 1.0 0.5 2.0 2.5 Forward Current(mA) 101001000 Fig.2 Relative Intensity vs. Forward Current 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1000 3/6PagePART NO. LH9033

Soldering heat Max. 260℃ 245±5℃ within 5 sec Preheat120 ~ 150℃ Cooling -5℃/sec 260¢XC MaX. 10sec.Max 1~5¢XC/sec 5sec Time Rising +5℃/sec Preheat150 3-1. LEAD Reflow Solder 240 Temp. (℃) 60 ~ 120 sec 3-2 PB-Free Reflow Solder 120 120 ~ 180 sec Above 220¢XC 60 sec.Max.1~5¢XC/sec 120 sec.Max. Reflow Soldering should not be done more than two times. Preheat 180~200¢XC 2. Wave Solder Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 4/6Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LH9033

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Circuit model B Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60℃±5 ℃fo r 15hrs. Circuit model A Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. LEDLED PART NO. LH9033

MIL-STD-883D:1008 JIS C 7021: B-10 MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test Operating Life Test Test Item 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Test Condition MIL-STD-202F:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=1000hrs ±2hrs Solderability Test High Temperature High Humidity Storage Test Thermal Shock Test IR Reflow Temperature Cycling 1.T=260¢XC Max. 10sec.Max. 2. 6 Min 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 30mins 5mins 30mins 5mins

2.10 Cyeles

(10min) (10min) 2.total 10 cycles 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Low Temperature Storage Test Environmental Test Endurance Test Classification Reliability Test: LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PagePART NO. LH9033