LH45030-PF

LH45030-PF LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only RECTANGLE TYPE LED LAMPS LH45030-PF DOC. NO : QW0905-LH45030-PF REV. : B DATE : DATA SHEET - 200606 - May. Pb Lead-Free Parts

+ - Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Package Dimensions 25.0MIN 2.54TYP 1.0MIN PART NO. LH45030-PF 9.6 1.5 MAX □0.5 TYP 4.9 2.4 Page 1/5

1.2 Luminous intensity @10mA(mcd) Typ. Spectral halfwidth △λnm 697 Peak wave length λPnm 2.6 Max. Forward voltage @ mA(V) 1.7 Min. 0.8 Min. Viewing angle 2θ1/2 (deg) 2/5Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only UNIT mA mA μA mW H Ratings 10Ir -40 ~ +85 -40 ~ +100 Forward Current Peak Forward Current Duty 1/10@10KHz Parameter Operating Temperature Storage Temperature Reverse Current @5V Power Dissipation Typical Electrical & Optical Characteristics (Ta=25 ℃) Symbol Topr Tstg IF PD IFP Absolute Maximum Ratings at Ta=25 ℃ Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LH45030-PFPART NO.

Relative Intensity@20mA 600 0.0 0.5 Wavelength (nm) 700800900 Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 1.0 0.9 1.1 1.2 0.5 Relative Intensity@20mA Normalize @25℃ -20 Ambient Temperature(℃) 806040200-40 100 0.0 806002040100 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve 100 Forward Current(mA) 0.1 1.0 1.0 1000 H CHIP Relative Intensity Normalize @20mA Forward Voltage(V) 0.0 1.5 1.0 0.5 2.0 2.5 Forward Current(mA) 101001000 Fig.2 Relative Intensity vs. Forward Current 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1000 3/5PageLH45030-PFPART NO.

Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) 2°/sec max 0° 0 Preheat 25° 120° 15050 100 Time(sec) 260° Temp(°C) 5°/sec max 260°C3sec Max Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/5

60 Seconds Max

LH45030-PFPART NO.

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reference Standard MIL-STD-883:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 DescriptionTest ConditionTest Item Reliability Test: 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. Low Temperature Storage Test High Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Operating Life Test This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. Solder Resistance Test Thermal Shock Test High Temperature High Humidity Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this test is the resistance of the device under tropical for hours. This test intended to see soldering well performed or not. 5/5PageLH45030-PFPART NO.