LH35140-PF

LH35140-PF LIGITEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

-200818 - Mar. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Pb Lead-Free Parts RECTANGLE TYPE LED LAMPS LH35140-PF DATA SHEET DOC. NO : QW0905-LH35140-PF REV. : A DATE :

25.0MIN 1.0MIN Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. -60° 75%50%100% Directivity Radiation -30° 60° 25%025%50%75%100% 30° + - 2.54TYP 1.5MAX □0.5 TYP Package Dimensions PART NO. LH35140-PF 7.01 1.76 1.73.95 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/5

3.0 Luminous intensity @10mA(mcd) Typ. Spectral halfwidth △λnm 697 Peak wave length λPnm 2.6 Max. Forward voltage @ mA(V) 1.7 Min. 1.2 Min. Viewing angle 2θ1/2 (deg) 2/5Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only UNIT mA mA μA mW H Ratings 10Ir -40 ~ +85 -40 ~ +100 Forward Current Peak Forward Current Duty 1/10@10KHz Parameter Operating Temperature Storage Temperature Reverse Current @5V Power Dissipation Typical Electrical & Optical Characteristics (Ta=25 ℃) Symbol Topr Tstg IF PD IFP Absolute Maximum Ratings at Ta=25 ℃ Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LH35140-PFPART NO.

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 3.0 Fig.2 Relative Intensity vs. Forward Current 100010010 Forward Current(mA) 2.5 2.0 0.5 1.0 1.5 0.0 Forward Voltage(V) Relative Intensity Normalize @20mA H CHIP 1000 1.0 1.0 0.1 Forward Current(mA) 100 Typical Electro-Optical Characteristics Curve Fig.1 Forward current vs. Forward Voltage 3.0 2.0 1.0 1.5 2.5 Fig.4 Relative Intensity vs. Temperature 100402006080 0.0 100-40020406080 Ambient Temperature(℃) -20 Relative Intensity@20mA Normalize @25℃ 0.5 1.2 1.1 0.9 1.0 0.8 -40-20 1.0 Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) 900800700 Wavelength (nm) 0.5 0.0 600 Relative Intensity@20mA Page 3/5 LH35140-PFPART NO.

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 °C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) 260°C3sec Max 2.Wave Soldering Profile Temp(°C) Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) 5°/sec max 150 Time(sec) 100 120° 50Preheat 25° 00°

60 Seconds Max

2°/sec max 260° LH35140-PFPART NO. Note:1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.

MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Test ItemTest Condition Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Reliability Test: LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only

Description

This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Low Temperature Storage Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) High Temperature High Humidity Test Thermal Shock Test 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this test is the resistance of the device under tropical for hours. This test intended to see soldering well performed or not. MIL-STD-883:1008 JIS C 7021: B-10 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. High Temperature Storage Test LH35140-PFPART NO.