LH2040-H0-PF LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
LH2040/H0-PFDOC. NO : QW0905- REV. : DATE : 04 - May. - 2012 A DATA SHEET LH2040/H0-PF ROUND TYPE LED LAMPS LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Lead-Free Parts Pb 發行 DCC 立碁電子
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Directivity Radiation Package Dimensions PART NO. LH2040/H0-PF Page 1/5 3.0 4.0 5.2 1.5MAX 4.2 2.54TYP □0.5 TYP 1.0MIN 25.0MIN + - -60° 60° -30° 30°
-40 ~ +100Tstg Storage Temperature Forward voltage @20mA(V) Luminous intensity @10mA(mcd) Spectral halfwidth △λnm Viewing angle 2θ 1/2 (deg) MATERIAL Peak wave length λPnm PART NO Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. GaPLH2040/H0-PF 8 Typ. 697Red Red Diffused 3.02.61.790 EmittedLensMin.Max.Min. Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR Page 2/5 PART NO. Reverse Current @5V Operating Temperature Peak Forward Current Duty 1/10@10KHz Absolute Maximum Ratings at Ta=25 ℃ Forward Current Power Dissipation Parameter 20 mAIF Topr Ir -40 ~ +85 PD IFP μA mA mW Symbol H Ratings UNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LH2040/H0-PF
1.5 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Ambient Temperature(℃) 1000900800700600 Wavelength (nm) Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA 0.0 0.5 1.0 0.8 -40 0.9 -20020406080100-40 0.0 1.0 0.5 -20 804020060100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Fig.2 Relative Intensity vs. Forward Current Forward Current(mA) Fig.4 Relative Intensity vs. Temperature Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.1 1.0 1.2 Forward Current(mA) 0.1 1.0 1.0 100 1000 2.03.0 2.0 3.0 2.5 Relative Intensity Normalize @20mA 4.05.01.0 0.0 0.5 1.0 2.0 1.5 3.0 2.5 Typical Electro-Optical Characteristics Curve Fig.1 Forward current vs. Forward Voltage H CHIP PART NO. 101001000 Page3/5 LH2040/H0-PF
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. Page 4/5LH2040/H0-PF Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 3°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to case)
60 Seconds Max
25° Preheat 3°/sec max Time(sec) 260° 120° Temp(°C) 5°/sec max 260°C3sec Max Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to case) 2.Wave Soldering Profile
This test intended to see soldering well performed or not. The purpose of this test is the resistance of the device under tropical for hous. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only (10min) (10min) 2.total 10 cycles Solderability Test Solder Resistance Test 1.T.Sol=245 ℃±5℃ 2.Dwell time=5 ±1sec 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. High Temperature High Humidity Test Thermal Shock Test Low Temperature Storage Test 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Operating Life Test High Temperature Storage Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Test ConditionTest Item Description Reliability Test: PART NO. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202:103B JIS C 7021: B-11 JIS C 7021: B-12 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 MIL-STD-883:1008 JIS C 7021: B-10 Reference Standard 5/5PageLH2040/H0-PF