LH1030 LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
DOC. NO : QW0905-LH1030 REV. : A DATE : 05 - Jul - 2005 DATA SHEET TOWER TYPE LED LAMPS LH1030 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
25.0MIN □0.5 TYP Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 60°-60° Directivity Radiation -30° 30° 1.0MIN2.54TYP PART NO. LH1030 4.5 8.0 1.5MAX 3.5 2.5 2.0 Package Dimensions 4.8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/4
℃-40 ~ +100Tstg Storage Temperature Viewing angle 2θ 1/2 (deg) Peak wave length λPnm Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LH1030 GaP Red Diffused Red Emitted Lens 697 1.7 90 2.6 Min. Max. 0.8 601.2 Typ.Min. Typical Electrical & Optical Characteristics (Ta=25 ℃) MATERIALPART NO COLOR Spectral halfwidth △λnm Forward voltage @20mA(V) Luminous intensity @10mA(mcd) Soldering Temperature Tsol Max 260℃ for 5 sec Max (2mm from body) Forward Current IF 15 mA Reverse Current @5V Operating Temperature Topr Ir Power Dissipation Peak Forward Current Duty 1/10@10KHz PD IFP -40 ~ +85 μA 60 mA mW Absolute Maximum Ratings at Ta=25 ℃ Parameter Symbol H Ratings UNIT PART NO. LH1030 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/4
Relative Intensity@20mA 600 0.0 0.5 Wavelength (nm) 700 800 900 Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 1.0 0.9 1.1 1.2 0.5 Relative Intensity@20mA Normalize @25℃ -20 Ambient Temperature(℃) 806040200- 4 0 100 0.0 806002 04 0 1 0 0 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve 100 Forward Current(mA)0.1 1.0 1.0 1000 H CHIP Relative Intensity Normalize @20mA Forward Voltage(V) 0.0 1.5 1.0 0.5 2.0 2.5 Forward Current(mA) 10 100 1000 Fig.2 Relative Intensity vs. Forward Current 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1000 3/4Page PART NO. LH1030
1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. Solderability Test This test intended to see soldering well performed or not. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec Thermal Shock Test Solder Resistance Test High Temperature High Humidity Test (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. The purpose of this test is the resistance of the device under tropical for hous. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202:103B JIS C 7021: B-11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, + 72hrs) Low Temperature Storage Test High Temperature Storage Test The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) The purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) Reliability Test: Operating Life Test Test Item Test Condition Description PART NO. LH1030 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 Reference Standard Page 4/4