LDS70 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
LED Lighting Power Supply - Class 2 Total Power: 70 Watts # of Outputs: Single Special FeatureS Constant Current & Constant Voltage operation Dimming options Free-Air rated - No forced air necesary for cooling compliance Class 2 Outputs IP64 to IP67 Water Protection CISPR 15 / FCC Part 15 EMI Performance Class C Harmonics < 1.0 W No-load power > 0.9 Power Factor SaFety EN 61347-2-13 UL 1310 / 8750 CSA C22.2 No. 107.1 CE Mark (LVD) Warranty Standard 5-Year Warranty Electrical Specifications Input Input ra nge nom: 100 - 240 Vac (U models); 120-277 Vac (H models) Input range (max): 90-264 Vac (U models); 90-305 Vac (H models); Derating may apply Input frequency: 47 - 63 Hz Inrush current: < 50 A max., cold start @ 25 °C Leakage current: 750 µA, at 264 Vac 50/60 Hz Input power (no-load): < 1.0 W, at no load Input power (max): < 82 W, at full load Input fusing: Internally fused EMI/RFI: CISPR 15 FCC Part 15 Efficiency (typical): 88% - 230 Vac 87% - 115 Vac Output Constant current: Programmable current levels. Refer to model table for details Constant voltage: No load to Full load operation. Refer to model table for details Output power: 70 W maximum (60 W for 12 V). Class 2 rated outputs Ripple voltage: < 2% Control and Protection Current limit: Programmable. Refer to model table for details Protection: Short Circuit Overvoltage Overtemperature Data Sheet
Environmental Specifications Criteria Specification Reference Power Factor > 0.9 Energy Star Harmonics Class C IEC 61000-3-2 THD - Input Current < 20% ANSI C82.11 Surge Immunity Level 3 6 kV ring wave IEC 61000-4-5 ANSI C62.41 EMC Compliance IEC 61000-4-2, -3, -4, -5, -6, -8, -11 Temperature (case) -40 °C to 90 °C Operating Ingress Protection IP64 through IP67 Refer to model table for details Mechanical Miscellaneous Criteria Specification Reference Input Wiring 300 mm 3-wire Output Wiring 300 mm 4-wire Weight 575 grams Mechanical Drawing 245.5 4226.7 (4PL) 225.0 237.5 235.5 350±10 (2PL) UL1015 18AWG ×2CUL1015 18AWG ×3C OUTPUT: Red (+) Black (-) 350±10 INPUT: BLACK (L) Green/Yellow (GR) White (N)
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 europe (uK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com LDS70 Series Data Sheet LDS70 DS Rev. 12.22.14
Ordering Information
Voltage Rated Output Current Current Adjust Dimming Interface IP Rating LDS70-12-U00 12 Vdc 5.0 Adc None IP67 LDS70-12-H03 12 Vdc 5.0 Adc 1 - 10 V IP67 LDS70-58-U00 58 Vdc 1.2 Adc None IP67 LDS70-58-U01 58 Vdc 1.2 Adc DIP Switch 2-level IP67 LDS70-58-H03 58 Vdc 1.2 Adc 1 - 10 V IP67 LDS70-58-H04 58 Vdc 1.2 Adc Programmable1 IP67 Notes: 1. The Dimming Interface on these highly-flexible models can be programmed via a Graphical User-Interface. The options include 0-10 V, 1-10 V and Bi-Level dimming. Maximum and minimum current levels and threshold levels are also programmable. Current Adjust and Dimming Description DIP Switch (for model -U01 only) Switch 1 Switch 2 -12 Model -58 Model ON ON 5.00 Adc 1.2 Adc OFF ON 3.75 Adc 0.9 Adc ON OFF 2.50 Adc 0.6 Adc OFF OFF 1.25 Adc 0.3 Adc 0 - 10 V Between Purple & Grey Wires (for models -H03 only)
2 Level - External Switch between Purple & Grey Wires (for model -U01 only)
CLOSED At Programmed Level OPEN At 20% of Rated Level Output Current 1 – 10 V Signal 100% 10%