DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Total Power: 25 Watts Current: 300 to 700 mA # of Outputs: Single Special FeatureS Constant Current & Constant Voltage operation 0 - 10 V Dimming Free-Air rated - No forced air necessary for cooling Hot-wiring protection 350 Vac for 2 hours compliance IP20 and Open-Frame CISPR 15 / FCC Part 15 EMI Performance Class C Harmonics > 0.9 Power Factor SaFety EN 61347-2-13 UL 60950 / 8750 CSA C22.2 No. 107.1 CE Mark (LVD) Warranty Standard 2-Year Warranty Electrical Specifications Input Input ra nge: 120-277 Vac Input frequency: 47 - 63 Hz Inrush current: < 30 A max., cold start @ 25 °C Leakage current: 250 µA, at 264 Vac 50/60 Hz Input power (short-circuit): 5 W Input current (max): < 0.35 A, at full load Input fusing: Internally fused EMI/RFI: CISPR 15 FCC Part 15 Efficiency (typical): 86% - 230 Vac 86% - 120 Vac Output Constant current: From 36 V to 26 V Constant voltage: From 300 mA to 700 mA or Programmed Value, whichever is less Output power: 25 W maximum Ripple current: 15% peak; 30% peak-to-peak Control and Protection Current limit: Programmable. Refer to model table for details Protection: Short Circuit Overvoltage Overtemperature Hot wiring protection Data Sheet
Environmental Specifications Criteria Specification Reference Power Factor > 0.9 Energy Star Harmonics Class C IEC 61000-3-2 THD - Input Current < 20% ANSI C82.11 Surge Immunity Level 3 IEC 61000-4-5 EMC Compliance IEC 61000-4-2, -3, -4, -5, -6, -8, -11 Temperature (case) -30 °C to +90 °C Operating Ingress Protection IP20 and Open-Frame Refer to model table for details LDS25-36-H03F LDS25-36-H03U Mechanical Drawing 147.0 ± 0.5 134.0 ± 0.3 138.0 ± 0.3 33.0 ± 0.3 42.0 ± 0.5 4.5 Ø3.2 (x4) 28.5 MAX. 23.5 MAX. cn2 mating connector Vendor Name: LANDWIN Housing: 2020S0600 Contact: 2023T011V 200 ± 10 20 ± 5 200 ± 10 20 ± 5 154.5 ± 0.5 174.5 ± 0.5 163.0 14.0 4.5 4.5 45.6 ± 0.5 L (Black or Brown) N (White or Blue) INPUT CABLE OUTPUT CABLE (Tin Plating) (Lead Free) (Tin Plating) (Lead Free) 6 - 8 mm RED / ORANGE (out +) GREEN (out -) BROWN (reserved) BLUE (reserved) WHITE / YELLOW (SGND) BLACK (dimming)
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 europe (uK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com LDS25 Series Data Sheet LDS25 DS Rev. 08.27.14
Ordering Information
Model Number Rated Output Voltage Rated Output Current Dimming Interface IP Rating LDS25-36-H03U 36 Vdc 700 mA dc 0 - 10 V IP20 LDS25-36-H03F 36 Vdc 700 mA dc 0 - 10 V Open-frame Input Connections: 2-Wire LDS25-36-H03F LDS25-36-H03U Function Name Pin# Wire Color Wire Gauge AC input Line L CN1-Black Black or Brown 18AWG AC input Neutral N CN1-Red White or Blue 18AWG Output Connections: 6-Wire LDS25-36-H03F LDS25-36-H03U Function Name Pin# Wire Color Wire Gauge DC Output - Positive OUT+ CN2-1 Red or Orange 22AWG DC Output - Return OUT- CN2-2 Green 22AWG Reserved CN2-3 Brown Reserved CN2-4 Blue Dimming DIMMING CN2-5 Black 22AWG Signal Ground SGND CN2-6 White or Yellow 22AWG Current Adjust and Dimming Description 0 - 10 V Interface Programmed Current Resistor Value 300 mA 16.9 kOhm 350 mA 22.6 kOhm 500 mA 52.3 kOhm 525 mA 61.9 kOhm 700 mA 511 kOhm Control Voltage between “Dimming” and “SGND” Output Current 0 – 10 V Signal 700 mA 01 0 11 Dimming Resistor between “Dimming” and “SGND”