LDO06C-005W05-SJ

LDO06C ARTESYN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 21

Technical content

File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter LDO06C SERIES Single Output

6 A current rating

Input voltage range 3-13.8 V Adjustable output voltage 0.59-5.1 V

• Optional 3-pin model factory set
• Optional 5-pin model factory set with power good option Excellent transient response Power enable (5-pin model) Minimum airflow Small package Termination voltage capacity RoHS Compliant The LDO06C is a new high density, open frame, non-isolated converter for space sensitive applications. This model has a wide input range of 3-13.8 V and offers a 0.59-5.1 V adjustable output with 6 A capability. Typical efficiency for this model is 92% (5 Vin, 2.5 Vout, 6 A load). The 5-pin version of this voltage device offers the additional features of enable, and with a default wide adjustable ouput voltage range or option of power good. [ 2 Y E A R W A R R A N T Y ] TÜV

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - continuous Vin (cont) 3.0 13.8 Vdc Vin(+) - Vin(-) Enable Voltage VEn (max) 3.3 5.0 V V When Vin < 5 V When Vin > 5 V Pgood Voltage VPgood (max) 3.3 5.0 V V When Vin < 5 V When Vin > 5 V Operating temperature Top 0 70 ˚C Measured at thermal reference points, See Note 1. See Derating curves Storage temperature Tstorage -40 125 ˚C Output current Iout (max) 6 A All specifications are typical at nominal input Vin = 5 V and 12 V, full load under any resistive load combination at 25 ˚C, unless otherwise stated. Input Characteristics Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - operating Vin 3.0 13.8 Vdc Input current - no load Iin 90 mA Vin (min) - Vin (max), enabled Input current - quiescent Iin(off) 10 mA Converter disabled Input voltage variation dv/dt 1.0 V/ms Product was tested at 1.2 V/ms. Much higher dv/dt is possible (>10 V/ms) Turn On/Off Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - turn on Vin (on) 2.8 Vdc See App Note 186 to adjust this point Input voltage - turn off Vin (off) 2.5 Vdc Turn on delay - enabled, then power applied Tdelay (power) 2 3 ms With the Remote ON/OFF signal asserted, this is the time from when the input voltage reaches the minimum speci- fied operating voltage until Vout is in regulation Turn on delay - power applied, then Remote ON/OFF asserted Tdelay (Remote ON/OFF) 2 3 ms Vin = Vin(on), then Remote ON/OFF asserted. This is the time taken until Vout is in regulation Rise time Trise 1.3 2 ms From 10% to 90%; full resis- tive load, 0 µF capacitance

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Signal Electrical Interface Characteristic - Signal Name Symbol Min Typ Max Units Notes and Conditions Remote ON/OFF See Application Note 186 Control pin open circuit voltage 3.3 V 5 V 12 V Vih 0.61 0.92 2.20 Vdc Iih = 0 µA; open circuit voltage See Notes 2 and 3 High level input current Iih 1 µA Current flowing into control pin when pin is pulled high (max. at Vih = 5 V High level input voltage Vih 0.502 Vdc Converter guaranteed on when control pin is greater than Vih (min) Low level input voltage Vil 0.200 Vdc Converter guaranteed off when control pin is less than Vil (max) Low level input current 3.3 V 5 V 12 V Iil (max) 110 166 398 µA Vil = 0 Vdc Reliability and Service Life Characteristic Symbol Min Typ Max Units Notes and Conditions Mean time between failure MTBF Hours MIL-HDBK-217F Vin = Vin (nom); Iout = Iout (max); ambient 25 ºC; ground benign environment Mean time between failure MTBF 8,392,808 Hours Telcordia SR-332 Issue 2, ground benign, ambient 40 ºC, Vin = Vin (nom)-Iout = Iout (max)

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Environmental Specifications Characteristic Symbol Min Typ Max Units Notes and Conditions Thermal performance 0 0 70 ˚C (See Note 1 and individual derat- ing curves) Type Parameter Reference Test Level Notes and Conditions Air temperature operating Air temperature non-operating 10 ˚C to 70 ˚C -40 ˚C to 120 ˚C Max. rate of change is 30 degrees per hour while operating and 20 degrees per hour while non- operating Relative humidity - operating Relative humidity - non-operating 80% 100% With non-condensing Excluding rain during parts shipment Vibration - operating Sinusoidal vibration, 0.5 G (0 to peak) acceleration Vibration - non-operating Sinusoidal vibration, 1.0 G (0 to peak) Shock Acceleration Non-operating square wave 40 G, square wave at 200 in/s (508 cm/s); on all six sides Non-operating half sine Half sine pulse for 70 in/s (178 cm/s) for 2 ms; on all sides except top Operating half sine Half sine pulse for 40 in/s (102 cm/s) for 2 ms; on all sides except top Other Specifications Characteristic Symbol Min Typ Max Units Notes and Conditions Switching frequency Fsw 750 kHz Weight 1.899 g

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 20065 Safety Agency Approvals Characteristic UL/cUL UL/cUL60950 TÜV Product Service IEC 60950 Material Ratings Characteristic Signal Name Notes and Conditions Flammability rating UL94V-0 Material type FR4 PCB Model Numbers Model Number Input Voltage Output Voltage Output Current (Max.) Efficiency at Full Load Max. Load Regulation LDO06C-005W05-SJ LDO06C-005W05-HJ LDO06C-005W05-VJ 3.0-13.8 V 3.0-13.8 V 3.0-13.8 V 0.59-5.1 V 0.59-5.1 V 0.59-5.1 V 6 A 6 A 6 A 92% 92% 92% ±0.5% ±0.5% ±0.5% RoHS Compliance Ordering Information The ‘J’ at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non PB-free) compliant versions may be available on special request, please contact your local sales representative for details.

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 20066

3.3 V, 5 V, 12 V Model

0.9 V Setpoint

Electrical Characteristics

• O/P Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 0.891 0.9 0.909 Vdc Vin = Vin (nom); Iout = Iout (nom) Line regulation ±0.2 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation ±0.5 % Vin = Vin (nom); Iout (min) to Iout (max) Output current - continuous Iout 0 6.0 Adc Output current - short circuit Isc 13.5 Adc Continuous, unit auto recovers Output voltage - noise (3.3 V) (5.0 V) (12 V) Vp-p Vp-p Vp-p mV pk-pk mV pk-pk mV pk-pk See Application Note 186 for more information Measurement band width

20 MHz

See Application Note 186 for details Characteristic Symbol Min Typ Max Units Notes and Conditions Input current - operating (Source) (3.3 V) (Sink) (3.3 V) (Source) (5 V) (Sink) (5 V) (Source) (12 V) (Sink) (12 V) Iin Iin Iin Iin Iin Iin 1.375 -1.330 0.909 -0.980 0.350 -0.328 Adc Adc Adc Adc Adc Adc Vin = Vin (nom); Iout = Iout (max) Input capacitance - internal filter Cinput 22 µF Input capacitance - external filter Cbypass 1 µF Recommended customer added capacitance Electrical Charateristics - O/P Characteristic Symbol Min Typ Max Units Notes and Conditions Load transient response - peak deviation Vdynamic 120 mV Peak deviation for 50% to 100% step load, di/dt =

10 A/µs

Trecovery 8 µs Settling time to within 1% of output set-point voltage for 50% to 75% step load External load capacitance Cext 0 8000 µF See Application Note 186 for output capacitance vs. stability

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 20067

Features

Characteristic Symbol Min Typ Max Units Notes and Conditions Overcurrent limit inception Ioc 14.5 Adc Vo = 90% of Vo (nom) Characteristic Symbol Min Typ Max Units Notes and Conditions Efficiency

3.3 V (source mode)

3.3 V (sink mode)

η 81 83 % Iout = 100% (max) Vin - Vin (nom) Efficiency

5.0 V (source mode)

5.0 V (sink mode)

η 82 84 Efficiency

12 V (source mode)

12 V (sink mode)

η 75 77 Efficiency η 85 87 % Iout = 50% (max) Vin - Vin (nom) Efficiency η 84 86 Efficiency η 73 75

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006

2.5 V Setpoint

• O/P Characteristic Symbol Min Typ Max Units Notes and Conditions Load transient response - park deviation Load transient response - recover External load capacitance Vdynamic Trecovery Cext 130 0 3500 mV µs µF Peak deviation for 50% to 100% step load, di/dt =

10 A/s

Settling time to within 1% of output set point voltage for 50% to 75% step load See Application Notes 186 for output capitance values vs. stability Characteristic Symbol Min Typ Max Units Notes and Conditions Input current - operating (Source) (3.3 V) (Sink) (3.3 V) (Source) (5 V) (Sink) (5 V) (Source) (12 V) (Sink) (12 V) Iin Iin Iin Iin Iin Iin 4.25 -4.10 2.78 -2.71 1.10 -1.08 Adc Adc Adc Adc Adc Adc Vin = Vin (nom); Iout = Iout (max); Vo = V0 (nom) Input capacitance - internal filter Cinput 22 µF Internal to converter Input capacitance - external filter Cbypass 1 µF Recommended customer added capacitance

• O/P Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 2.475 2.500 2.525 Vdc Vin = Vin (nom); Iout = Iout (nom) Line regulation ±0.2 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation ±0.5 % Vin = Vin (nom); Iout (min) to Iout (max) Output current - continuous Iout 0 6.0 Adc Output current - short circuit Isc 13.5 Apk Continuous, unit auto recovers from short Output voltage - noise Vrms (3.3 V) (5.0 V) (12 V) Vp-p Vp-p Vp-p mV pk-pk mV pk-pk mV pk-pk Measurement band width

See Application Note 186 for details

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 20069 Characteristic Symbol Min Typ Max Units Notes and Conditions Efficiency η 91 93 % Iout = 100% (max) Vin - Vin (nom) Efficiency η 91 93 Efficiency η 86 88 Efficiency η 93 95 % Iout = 50% (max) Vin - Vin (nom) Efficiency η 91 93 Efficiency η 83 85 Characteristic Symbol Min Typ Max Units Notes and Conditions Overcurrent limit inception Ioc 11 Adc Vo = 90% of Vo (nom)

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 200610

12 V Model

5 V Setpoint

• O/P Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 4.95 5.00 5.05 Vdc Vin = Vin (nom); Iout = Iout (nom) Line regulation ±0.2 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation ±0.5 % Vin = Vin (nom); Iout (min) to Iout (max) Output current - continuous Iout 0 6.0 Adc Output current - short circuit Isc 13.5 Apk Continuous, unit auto recovers from short Output voltage - noise Vrms Vp-p 50 mV pk-pk Measurement band width

See Application Note 186 for details Characteristic Symbol Min Typ Max Units Notes and Conditions Input current - operating 2.70 Adc Vin = Vin (nom); Iout = Iout (max); Vo = V0 (nom) Internal to converter Input capacitance - internal filter Cinput 22 µF Input capacitance - external filter Cbypass 1 µF Recommended customer added capacitance

• O/P Characteristic Symbol Min Typ Max Units Notes and Conditions Load transient response - park deviation Load transient response - recover Vdynamic Trecovery 100 mV µs Peak deviation for 50% to 100% step load, di/dt =

Settling time to within 1% of output set point voltage for 50% to 75% step load External load capacitance Cext 0 1000 µF See Application Notes 186 for output capacitance values vs. stability

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Characteristic Symbol Min Typ Max Units Notes and Conditions Overcurrent limit inception Ioc 10 Adc Vo = 90% of Vo (nom) Characteristic Symbol Min Typ Max Units Notes and Conditions Efficiency Efficiency η η Iout = 100% Iout (max), Vin = Vin (nom) Iout = 50% Iout (max), Vin = Vin (nom)

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 200612 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE (°C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE (°C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE (°C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 0 1 2 3 4 5 6 EFFICIENCY (%) OUTPUT CURRENT (A) 3Vin 5Vin 8Vin 10Vin 12Vin

3.3 V, 5 V and 12 V Model

Figure 1: Thermal Derating Curve 3.3 Vin Figure 2: Thermal Derating Curve 5 Vin Figure 3: Thermal Derating Curve 12 Vin Figure 4: Efficiency vs. Load Figure 5: Remote On/Off (Channel 1: Output Voltage, Channel 3: Enable) Figure 6: Typical Output Ripple

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 200613 Figure 7: Transient Response 100% - 50% (Channel 1: Current Step at 3 A/div, Channel 2: Output Voltage Deviation) Figure 8: Transient Response 50% - 100% (Channel 1: Current Step at 3 A/div, Channel 2: Output Voltage Deviation) Figure 9: Short Circuit Characteristic (Channel 1: Output Current at 10 A/div, Channel 3: Output Voltage)

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 200614 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE ( C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE (°C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE (°C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 0 1 2 3 4 5 6 EFFICIENCY (%) OUTPUT CURRENT (A) 3Vin 5Vin 8Vin 10Vin 12Vin Figure 10: Thermal Derating Curve 3.3 Vin Figure 11: Thermal Derating Curve 5 Vin Figure 12: Thermal Derating Curve 12 Vin Figure 13: Efficiency vs. Load Figure 14: Remote On/Off (Channel 1: Output Voltage, Channel 3: Enable) Figure 15: Typical Output Ripple

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Figure 16: Transient Response 100% - 50% (Channel 1: Current Step at 3 A/div, Channel 2: Output Voltage Deviation) Figure 17: Transient Response 50% - 100% (Channel 1: Current Step at 3 A/div, Channel 2: Output Voltage Deviation) Figure 18: Short Circuit Characteristic (Channel 1: Output Current at 10 A/div, Channel 3: Output Voltage)

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 30 40 50 60 70 OUTPUT CURRENT (A) AMBIENT TEMPERATURE (°C) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 2 m/s (400 LFM) 0 1 2 3 4 5 6

95 EFFICIENCY (%)

OUTPUT CURRENT (A) 6Vin 8Vin 10Vin 11Vin 12Vin Figure 19: Thermal Derating Curve 12 Vin Figure 20: Efficiency vs. Load Figure 21: Remote On/Off (Channel 1: Output Voltage, Channel 3: Enable) Figure 22: Typical Output Ripple Figure 23: Transient Response 100% - 50% (Channel 1: Current Step at 2 A/div, Channel 2: Output Voltage Deviation) Figure 24: Transient Response 50% - 100% (Channel 1: Current Step at 2 A/div, Channel 2: Output Voltage Deviation)

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Figure 25: Short Circuit Characteristic (Channel 1: Output Current at 10 A/div Channel 3: Output Voltage)

LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 200618 Figure 26: Mechanical Drawing - Horizontal Figure 27: Mechanical Drawing - Vertical Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.062 (1.57) REF 0.025 (0.64) ±.001 SQ PINS TYP 0.120 (3.05) TYP 0.125 (3.18) TYP 0.443 (11.25) 0.055 (1.40) REF 0.000 (0) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.050 (1.27) 0.035 (0.89) 0.580 (14.73) 0.650 (16.51) 0.410 (10.41) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.410 (10.41) 0.650 (16.51) 0.071 (1.80) 4X 0.067 (1.70) 0.050 (1.27) TYP 0.055 (1.40) 0.371 (9.42) 0.025 (0.64) ±.001 SQ PINS TYP 0.062 (1.547) 1 5 Pin Connections Pin No. Function

1 Remote on/off

2 Vin

3 Common / RTN

4 Vout

5 PG / Trim

6 Mech Pin

(Horz/SMT only)

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 200619 Figure 28: Mechanical Drawing - Surface Mount Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0 (0.00) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.050 (1.27) 0.360 (9.14) 0.035 (0.89) REF 0.650 (16.51) 0.410 (10.41) 0.580 (14.73) 0.062 (1.57) REF 0.040 (1.02) REF 0.125 (3.18) TYP 0.441 (11.20) 0.055 (1.40) REF 0.025 (0.64) REF 1 5 LDO06C- 005W05-SJ Pin Connections Pin No. Function (Horz/SMT only)

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Note 1 Thermal reference point is defined as the highest temperature measured at any one of the specified thermal reference points. See Application Note 186. Note 2 The control pin is referenced to Ground. Note 3 The LDO06C is supplied as standard with positive logic. Control Input pulled low: Unit Disabled Control Input left open: Unit Enabled

www.artesyn.com LDO06C Series | 6 A DC-DC C Class Non-Isolated DC/DC Converter File Name: lf_ldo06c.pdf Rev: (01) 12 Apr 2006 Longform Datasheet © Artesyn Technologies® 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. NORTH AMERICA email: sales.us@artesyn.com '800 769 7274 '+508 628 5600 EUROPEAN LOCATIONS email: sales.europe@artesyn.com IRELAND '+353 24 93130 AUSTRIA '+43 1 80150 FAR EAST LOCATIONS email: sales.asia@artesyn.com HONG KONG '+852 2699 2868