LDD535-65-XX-PF LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
LDD535/65-XX-PFDOC. NO : QW0905- REV. : A DATE : - 200805 - Jun. DUAL DIGIT LED DISPLAY (0.56 Inch) LDD535/65-XX-PF DATA SHEET LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Lead-Free Parts Pb
Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LDD535/65-XX-PF Package Dimensions PART NO. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/8 2.54X8=20.32 (0.8") 25.0(0.984") 14.2 (0.56") Ø 0.51 TYP. PIN NO.1 LDD535/65-XX-PF LIGITEK DIG.1 DIG.2 15.24 (0.60") 19.0 (0.748") 4.4±0.5 ψ1.5(0.059") 8.0(0.315") E A G D C B DP F PIN 18 PIN 10 PIN 1 PIN 9
C C BA 31516 DIG.1 16 153 A DIG.1 B DPGFEDCBDP AGFED 171218 810114 75612 9 LDD5365-XX-PF DIG.2 1821 17 DEFG 10411 8 A DIG.2 DP BC 1265 7 DEFG DP LDD5355-XX-PF Page LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Internal Circuit Diagram PART NO. 2/8LDD535/65-XX-PF
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PIN NO LDD5355-XX-PF PIN NO PART NO. Electrical Connection LDD5365-XX-PF 3/8PageLDD535/65-XX-PF Common Cathode Dig.1 Common Anode Dig.1 Common Cathode Dig.2 Common Anode Dig.2 Anode E DIG.2 Cathode E DIG.2 Anode D DIG.1 Anode C DIG.1 Anode DP DIG.1 Cathode C DIG.1 Cathode D DIG.1 Anode B DIG.1 Anode A DIG.1 Anode G DIG.1 Cathode A DIG.1 Cathode G DIG.1 Cathode B DIG.1 Anode F DIG.1 Cathode F DIG.1 Anode E DIG.1 Cathode E DIG.1 Anode D DIG.2 Cathode D DIG.2 Anode G DIG.2 Cathode G DIG.2 Anode C DIG.2 Cathode C DIG.2 Anode B DIG.2 Cathode B DIG.2 Anode A DIG.2 Cathode A DIG.2 Anode F DIG.2 Cathode F DIG.2 Anode DP DIG.2 Cathode DP DIG.2 Cathode DP DIG.1
Part Selection And Application Information(Ratings at 25)℃ Emitted Red Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LDD5365-XX-PF LDD5355-XX-PF GaAlAs PART NO Material CHIP Common Anode Common Cathode 660 common cathode or anode λP (nm) 20 1.51.8 2.4 Min. (nm) Vf(v) Typ. Max. Reverse Current Per Any Chip Storage Temperature Operating Temperature Tstg Topr Ir -25 ~ +85 -25 ~ +85 2:13.055.0 IV-MIv(mcd) Typ.Min. μA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Absolute Maximum Ratings at Ta=25 ℃ Forward Current Per Chip Power Dissipation Per Chip Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) Parameter SR IFP PD IF 100 100 Symbol Ratings mW mA mA UNIT Page4/8 PART NO. LDD535/65-XX-PF
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only If=20mA Test Condition If=20mA If=20mA If=10mA Vr=5V voltVf Forward Voltage Per Chip Luminous Intensity Matching Ratio Reverse Current Any Chip Spectral Line Half-Width Peak Wavelength Luminous Intensity Per Chip IV-M Ir Iv λP μA nm mcd nm Test Condition For Each Parameter Parameter Symbol Unit 5/8Page PART NO. LDD535/65-XX-PF
Fig.3 Forward Voltage vs. Temperature Fig.5 Relative Intensity vs. Wavelength Ambient Temperature(℃) Relative Intensity@20mA Wavelength (nm) Forward Voltage@20mA Normalize @25℃ Fig.4 Relative Intensity vs. Temperature Ambient Temperature(℃) Relative Intensity@20mA Normalize @25℃ Typical Electro-Optical Characteristics Curve Forward Voltage(V) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Current(mA) Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.0 0.1 1.0 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 600650700750 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20-4040 20080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 SR CHIP Page 6/8 PART NO. LDD535/65-XX-PF
Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5°C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260°C 2.Wave Soldering Profile Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 °C Max Soldering Time:3 Seconds Max(One time only) Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 °C
60 Seconds Max
25° 120° Temp(°C) 260° 50Preheat 2°/sec max 100 5°/sec max 260°C3sec Max 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page7/8 PART NO. LDD535/65-XX-PF
MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs Thermal Shock Test Solder Resistance Test High Temperature High Humidity Test (10min) (10min) 2.total 10 cycles 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. Low Temperature Storage Test High Temperature Storage Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hours. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202:103B JIS C 7021: B-11 The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. JIS C 7021: B-12 MIL-STD-883:1008 JIS C 7021: B-10 Reliability Test: Test Item Operating Life Test Test Condition Description Reference Standard LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page8/8 PART NO. LDD535/65-XX-PF