LDBK9553Z-TR1 LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
SURFACE MOUNT LED TAPE AND REEL LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DATA SHEET DOC. NO : QW0905-LDBK9553Z/TR1 REV. : A DATE : 28 - Jun. - 2007
+ - Page 1/7 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 2.2 PART NO. LDBK9553Z/TR1 Package Dimensions 2.8 3.2 3.5 0.9 0.95 0.9 1.85 1.85 0.23 4.06 1.55 12.0±0.3 9.3 2.24 Carrier Type Dimensions Polarity 5.5 1.75 4.0 4.0 3.12 Note : The tolerances unless mentioned is ±0.2mm,Angle ± 0.5. Unit=mm. Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 2.0
PART NO. LDBK9553Z/TR1 Page 2/7 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reel Dimensions 16.0±1.0 14.2±1.0
Description
12.0mm tape,7"reel Part No. LDBK9553Z/TR1 Quantity/Reel 1500 devices ψ178±2.0 74.0±1.5
Topr Operating Temperature -20 ~ +80 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LDBK9553Z/TR1 Blue InGaN/GaN Water Clear 1603.5304704.080120 Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO MATERIAL EmittedLens COLOR Typ. Luminous intensity @20mA(mcd) Dominant wave length λDnm Forward voltage @20mA(V) Typ.Max.Min. Spectral halfwidth △λnm Viewing angle 2θ 1/2 (deg) Storage Temperature Tstg -30 ~ +100 ℃ Page 3/7 mAIF 30 Forward Current Reverse Current @5V Electrostatic Discharge ESD Ir Peak Forward Current Duty 1/10@10KHz Power Dissipation PD IFP 8000 V μA 120 100 mA mW Absolute Maximum Ratings at Ta=25 ℃ Parameter Symbol DBK Ratings UNIT LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LDBK9553Z/TR1
Fig.5 Relative Intensity vs. Wavelength Typical Electro-Optical Characteristics Curve LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1.03.04.0 0 1 1.0 Relative Intensity@20mA Wavelength (nm) 450 0.0 400500550 0.5 0.5 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Ambient Temperature(℃)Ambient Temperature(℃) 0-20-40 0.8 0-40-2010080604020 0.0 601008040 Fig.4 Relative Intensity vs. Temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 Fig.3 Forward Voltage vs. Temperature 1.2 3.0 Relative Intensity Normalize @20mA Forward Current(mA) Forward Current(mA)Forward Voltage(V) 2.05.0110 0.0 0.5 1.0 1.5 2.0 1001000 Fig.2 Relative Intensity vs. Forward CurrentFig.1 Forward current vs. Forward Voltage 2.5 3.0 100 1000 DBK CHIP Page4/7PART NO. LDBK9553Z/TR1
120 ~ 180 sec 5sec60 ~ 120 sec Note:1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 260°C MaX. 10sec.Max 120 sec.Max. 1~5°C/sec Preheat 180~200°C Above 220 °C 60 sec.Max. 1~5°C/sec 4. PB-Free Reflow Solder Time 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 3. LEAD Reflow Solder Rising +5℃/sec 150 120 Preheat 240 Temp. (℃) Cooling -5℃/sec 120 ~ 150℃ Preheat 245±5℃ within 5 sec Soldering heat Max. 260℃ 2. Wave Solder Recommended Soldering Conditions LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/7PART NO. LDBK9553Z/TR1
Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5℃~35℃,RH<60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5℃ ~ 35℃,RH<60%, they should be treated at 60℃±5 ℃fo r 15hrs. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Circuit model B LED Circuit model A LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. PART NO. LDBK9553Z/TR1
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reference Standard MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 MIL-STD-883D:1008 JIS C 7021: B-10 JIS C 7021: B-12 MIL-STD-202F:103B JIS C 7021: B-11 Reliability Test: Test ConditionTest ItemClassification Operating Life Test 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Endurance Test High Temperature Storage Test 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=1000hrs ±2hrs High Temperature High Humidity Storage Test 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Low Temperature Storage Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-750D:2031.2 J-STD-020 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 (10min) (10min) 2.total 10 cycles Thermal Shock Test Temperature Cycling Solderability Test 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface Environmental Test IR Reflow 30mins 5mins 30mins 5mins
2.10 Cyeles
Ramp-up rate(183 ℃ to Peak) +3 ℃ second max Temp. maintain at 125( ±25)℃ 120 seconds max Temp. maintain above 183 ℃ 60-150 seconds Peak temperature range 235 ℃+5/-0℃ Time within 5 ℃ of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 ℃/second max PART NO. LDBK9553Z/TR1