LCT43-E ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
47 Watts
Total Power: 47 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Triple SPECIAL FEATURES Totally enclosed Universal input Quick installation Built-in EMI filter Low output ripple Overvoltage protection Overload protection RoHS compliant SAFETY VDE 0805/EN60950 21310-3336-0003 UL UL60950 E186249 CSA CSA 22.2-234 -950-95-M90 CB Certificate and report 6593 CE Mark (LVD) Electrical Specifications Input Input range 85 - 264 Vac (wide range) 120 - 300 Vdc Frequency 47-63 Hz Inrush current <20 A peak @ 115 Vac, <40 A peak @ 230 Vac cold start @ 25°C Input current 1A max. (RMS) @ 115 Vac Efficiency 70% typical at full load EMI filter FCC Class B conducted and radiated; CISPR 22 Class B conducted and radiated; EN55022 Class B conducted and radiated Bellcore GR-1089-core Class B conducted Safety ground leadage current <3.5 mA @ 50/60 Hz, 264 Vac input Output Maximum power 47 W with 12 CFM forced air Cross regulation ±2% on output 1; ±5% on outputs 2, 3 Hold-up time 10 ms @ 47 W load, 100 Vac input Overload protection Short circuit protection on all outputs. Case overload protected @ 110-135% above peak rating Overvoltage protection 5.50 - 6.75 Vdc on main output Data Sheet
Environmental Specifications Operating temperature 0 ° to 50 °C ambient derate each output as 2.5% per degree from 50 °C to 70 °C Storage temperature -40 °C to +85 °C Temperature co-efficient ±.04% per °C Electromagnetic susceptibility Designed to meet IEC1000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 5% to 90% .41G from 3 to 500 Hz; Spectral break points of .0065 G2/Hz Vibration At 10 Hz and 200 Hz and 5 db/octave roll off at each end, 2 hours per axis MTBF demonstrated >300,000 hours at full load and 25 °C ambient conditions
Ordering Information
Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 12CFM Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 LCT43-E +5 V 1.0 A 4 A 7 A 8 A +4/-2% 50 mV +12 V 0.1 A 1 A 1.2 A 1.5 A ±5% 120 mV -12 V 0 A 0.5 A 0.5 A 0.6 A ±5% 120 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users.
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LCT43-E DS 18Mar2016 Mating Connectors AC Input IEC 320 DC Outputs Molex 15-48-0406 (USA) Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5 mm) 3. Specifications are for convection rating at factory settings at
115 Vac input 25 ºC unless otherwise stated
- Warranty: 1 year 5. Weight: 1.25 lbs/0.57 kg Pin Assignments Connector LCT43-E SK1-1 AC Line SK1-2 Ground SK1-3 AC Neutral SK2-1 -12V SK2-2 Com SK2-3 +5V SK2-4 +5V SK2-5 Common SK2-6 +12V Mechanical Drawings