LCC600-48U-9P ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
600 Watts Conduction Cooling
Total Power: 600 W # of Outputs: Single Outputs: 12, 28, 36, 48 Vdc SPECIAL FEATURES 600 W full power at elevated temperatures Wide operating temperature range (-40 °C to 85 °C baseplate) Adjustable output Remote output On/Off AC_OK; DC_OK signals 5 V standby voltage Active current share Conduction-cooled/fanless I2C / PMBus Medical and ITE Safety3 Suited for BF-type applications Active power factor correction Optional IP65 variant Optional 277 Vac input variant COMPLIANCE EMI Class B EN61000 Immunity SAFETY UL + CSA: 60950-1 2nd Ed. ANSI ES60601-13 UL 87505 CSA-C22.2 No. 250.133 TUV: 60950-1 2nd Ed. 60601-1 3rd Ed.3 EN 61347-1; -2-135 CB Scheme: IEC 60950-1 IEC 60601-1 IEC 61347-1; -2-135 China CCC CE Mark Electrical Specifications Input Input ra nge U Suffix: 90 - 264 Vac (Safety rating:100 - 240 Vac) 127 - 374 Vdc4 H Suffix: 180 - 305 Vac (Safety rating: 200 - 277 Vac) 254 - 420 Vdc4 Frequency 47 - 63 / 440 Hz (Safety rating: 50/60 Hz) Input fusing Internal fuse on both L and N lines (12.5 A - U suffix; 7 A - H suffix) EMI/RFI FCC Class B, CISPR22/EN55022 Class B MIL-STD-461F EMI1 Compliance to CE101, 102; CS101, 114, 115, 116 (with external filter1) Inrush current ≤ 25 A peak Power factor 0.99 typical Harmonics Meets EN61000-3-2 Class A and Class C2 Input current < 10 Arms @ 100 Vac Hold up time 20 ms min for Main Output (230 Vac) @ 100% Load Efficiency 93.3% typical @ 230 Vac; 100% Load; 28 Vdc Leakage current < 200 μA (per ANSI/ES60601; 264 Vac split-phase / 60 Hz) < 400 μA (per IEC60601; 264 Vac / 50 Hz Isolation voltage U Suffix H Suffix PRI-SEC: 4,000 Vac (2X MOPP) 3,000 Vac PRI-Chassis: 1,500 Vac (1X MOPP) 2,000 Vac SEC-Chassis: 1,500 Vac (1X MOPP) 1,500 Vac Data Sheet 1Artesyn Filter PN: 700-014447-0000 (Zhongguang PN: ZGLPG-10-02M). 2Meets Class C ≥ 50% load. 3U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only. 4DC input rating not part of product’s Safety approval. 5LED Lighting approvals apply to all 48V output variants.
Environmental Specifications Operating temperature range -40 °C to +85 °C Baseplate temperature Storage temperature -40 °C to +85 °C Humidity 10% to 95% Altitude 16,402 ft (Operating) / 50,000 ft (Non-Operating) Shock MIL-STD-810F 516.5 Procedure I, VI Vibration MIL-STD-810F 514.5 Cat. 4, 10 Ingress protection IP65 (for suffix “-4P”) MTBF (calculated) >2M Hrs, 25 °C per SR-332 Issue 3 Electromagnetic immunity Designed to meet EN61000-4-3, -4, -5, -8, -11 (Level 3); EN61000-4-2 (Level 4); EN60601-1-2 and EN55024 For H suffix, Level 4 for EN61000-4-5 Electrical Specifications Output Output rating See Ordering Information table Standby output 5.0 Vdc @ 1.5 A Max Set point ± 0.5% Factory set point Total regulation Main Output: ± 2.0%
5 Vsb: ± 5%
Combined Line / Load / Temperature Rated load 600 W maximum 600 W from -40 °C to 85 °C Baseplate Temp. Derate output to 28 W @ 95 °C Baseplate Temp Minimum load 0 A For both Main and 5 Vsb Outputs Output voltage adjust range See Ordering Information table Max power limited to 600 W Output noise Main Output: 1.0% max p-p
5 Vsb: 60 mV max p-p
Measured with 0.1 μF Ceramic and 10 μF Tantalum Cap,
20 MHz BW
Remote sense Compensation up to 500 mV Pin 10: +Vout_RS / Pin4: -Vout_RS Over current protection 105 - 130% of full load current Default is Shutdown mode with Auto-retry every 2~4 sec. Output latches after 20 sec of continuous OCP fault presence. Restart after latch possible through AC recycle, Inhibit toggle or through PMBus. Over voltage protection 125 - 145% Vo, nom Main Output 125 - 130% 5 Vsb Latching / AC Recyle or Inhibit toggle required for PSU restart Over temperature protection > 95 °C Baseplate temperature Output Shutdown / Auto-recovery AC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when AC is present DC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when Main Output is within regulation Remote inhibit Contact Closure Pin 19: Open/Float = ON; Close/Ground = OFF # Units in parallel operation Qualified up to 5 units in parallel. Consult factory if more than 5 are required. Pin 5: IShare pin for main output only. Output dimming 0-10 Vdc external voltage; 0-100 kOhm external resistance Consult with productsupport.ep@artesyn.com
Ordering Information
Model Number* AC Input Output Setpoint Setpoint Tolerance Adjustment Range Output Current [A] Max O/P Typical Efficiency Standby Output Combined Line/Load Regulation Output Ripple Min Max Power [W] LCC600-48U-9P 90 - 264 48 V ±0.5% 44 - 54 0 12.5 600 93.0% 5 Vdc @ 1.5 A 2% 1% LCC600-48H-9P 180 - 305 LCC600-36U-9P 90 - 264 36 V ±0.5% 32 - 38 0 16.7 600 92.0% 5 Vdc @ 1.5 A 2% 1% LCC600-36H-9P 180 - 305 LCC600-28U-9P24 90 - 264 24 V ±0.5% 24 - 30 0 25 600 93.0% 5 Vdc @ 1.5 A 2% 1% LCC600-28U-9P 90 - 264 28 V ±0.5% 24 - 30 0 25* 600 93.5% 5 Vdc @ 1.5 A 2% 1% LCC600-28H-9P 180 - 305 LCC600-12U-9P 90 - 264 12 V ±0.5% 12 - 15 0 50 600 92.3% 5 Vdc @ 1.5 A 2% 1% LCC600-12H-9P 180 - 305 *Change suffix “-9P” to “-4P” for IP65 rated enclosure with fly lead wires *Change suffix “-4P” to “-4PR” for IP65 rated enclosure with right angle fly lead wires (applies to 28, 36, 48 Vdc) *Change suffix “-4P” to “-4PV” to omit the control cable (applies to 28, 36, 48 Vdc) Typical efficiency at high line, factory default voltage and full load *When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout is 21.43 A (600 W max). Mechanical Drawings -9P Suffix SIGNAL PIN LOCATIONS4-POSITION TERMINAL BLOCK M4x8 SCREW, 10mm PITCH WITH PLASTIC COVER (SEE NOTE 7) MODEL LABEL TRIMPOT WINDOW 3-POSITION LOCKING CONNECTOR (TYCO P/N: 1-350943-0 OR EQUIVALENT) MATE WITH TYCO P/N: 350766-1 (HOUSING) & 350536-1 (CONTACT TERMINAL) CUSTOMER MOUNTING HOLE FIT WITH M4 SCREW (6 PL) HEADER CONNECTOR (J1501) MATE WITH P/N: JST PN PHDR-20VS (HOUSING) & JST PN SPHD-001T-P0.5 (CONTAC PINS) (SEE PIN LOCATION DETAILS) PIN 2 PIN 1 PIN 19PIN 20 228 0.50 228 0.50 101 0.50 85.0 0.50 39.8 +0.7 -0.3 (29.7) (35.50) (2.2) 73.34 73.34 93.00 40.66 0.20 Notes: 1) Recommended mounting screw is M4 in 6 locations; 8-10 kgf-cm torque. 2) Baseplate material/finish: 5 mm Aluminum with Black Anodized. 3) Weight: 9P Suffix: 1.63 kg typical 4P Suffix: 1.81 kg typical 4) Thermal hotspot reference is in the middle of the baseplate.
CUT EXPOSED LEADS OF SIGNAL WIRES TRIMPOT LOCATIONMODEL LABEL UL2517 14AWGX4C UL2517 26AWGX20C+AL SJTW 18AWGX3C CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW (6 PL) (21.4) 228 0.5 (50.5) 101 0.5 85 0.5 39.8 +0.7 -0.3 228 0.5 (30) 300 10 (3-93.0) (2-146.7) (2-73.3) 300 10 (30) (2-40.7) 8.5 84.41 0.5 290 10 0.2 -4P Suffix (28, 36, 48 Vdc) Mechanical Drawings -4P Suffix (12 Vdc) 228 0.5 3X- 307 10 59 0.5 46 0.5(5) (22) (50.5) 85 0.50 40.50max 101 0.50 (2X-73.3) (3X-93) 300 10 (24) 0.2 ARTESYN P/N: 750-006769-000X (INPUT CABLE ASSY) TIN DIP THW OR MTW AWG 6 WIRE TIN DIP TRIMPOT LOCATION UL2517 26AWGX20C RATING AND SAFETY LOGO LABEL ARTESYN P/N: 750-007030-00XX (OUTPUT CABLE ASSY) SEE NOTE 9 REFERENCE POINT HEIGHT MEASUREMENT CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW (SEE NOTE 8) (6 PL)
-4PR Suffix (28, 36, 48 Vdc) TIN DIP WIRES MODEL LABEL TRIMPOT LOCATION HEIGHT MEASUREMENT REFERENCE POINT 0.2 UL2517 26AWGX20C+AL UL2517 14AWGX4C CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW SJTW 18AWGX3C 265.0 2.0 40.66 73.34 73.34 146.68 93 (3X) 300 10 80.1 228 0.5 101 0.5
40.5 MAX
0.2
Pin Assignment (INPUT) -9Px Suffix -4Px Suffix DESCRIPTION DESIGNATION NOTES DESIGNATION NOTES Live L1 Mating Connector: 350766-1 (Housing); 350536-1 (Contact Terminals) Brown SJTW 18AWGX3C; PVC jacket; 105 °C / 300 V Neutral L2 Blue Ground G Y/GR Pin Assignment (MAIN OUTPUT) -9Px Suffix -4Px Suffix (28, 36, 48 Vdc) -4Px Suffix (12 Vdc) DESCRIPTION DESIGNATION NOTES DESIGNATION NOTES DESIGNATION NOTES Main Output +Vout
4 Position Terminal Block: M4
Screw/10mm Pitch; 12kgf-cm Torque; Accepts 14-16AWG Ring Tongue - Spade Terminals MOLEX BB-124-08 (19141- 0058) or EQUIVALENT Red 14AWGX4C; PVC jacket; 105 °C / 300 V Red 6AWG Multi-Strand; PVC jacket; 105 °C / 600 V Red Main Output Return GND -Vout Black Black Black Pin Assignment J1501 - Signal & Control -9Px Suffix -4Px Suffix SIGNALS DESCRIPTION PIN # NOTES WIRE COLOR NOTES A2_OUT EEPROM Address 1 J1501 Mating Connector: JST PN PHDR-20VS Contact Pins: JST PN SPHD- 001T-P0.5 BLACK 26AWGX20C+AL; PVC jacket; 105 °C / 300 V GND Ground 2 BROWN A1_OUT EEPROM Address 3 RED -VOUT_RS Remote Sense Return (Main O/P) 4 ORANGE ISHARE Load Share Voltage 5 YELLOW A0_OUT EEPROM Address 6 GREEN SDA Serial Data Signal (I2C) 7 BLUE SPARE_1 Spare/Unused Pin 8 VIOLET SCL Serial clock Signal (I2C) 9 GRAY +VOUT_RS Remote Sense (Main O/P) 10 WHITE 5VSB 5V Standby (1.5A Max) 11 PINK SGND 5V Standby Return 12 LIGHT BLUE SPARE_2 Spare/Unused Pin 13 WHITE/VIOLET G_DCOK_C Global DC_OK Collector 14 WHITE/YELLOW WP EEPROM Write Protect 15 WHITE/ORANGE G_DCOK_E Global DC_OK Emitter (GND) 16 WHITE/BLACK GND Return GND for O/P Signal and I2C communication 17 WHITE/RED G_ACOK_C Global AC_OK Collector 18 WHITE/BROWN INH_EN Output Inhibit_Enable Pin (turns output off) 19 WHITE/GREEN G_ACOK_E Global AC_OK Emitter (GND) 20 WHITE/BLUE
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. LCC600 DS 21Oct2016 ACCESSORIES Orderable Part Number Description Diagram 70-841-030 For Suffix "-9P" AC Input Mating Connector Cable Assembly (w/ 0.3 m wire length) 73-788-001 J1501 (20 Pin Control Signal) Mating Connector with 0.3 m wires attached for "-9P" suffix 70-841-031 Pre-Cut thermal insulator (Laird TFLEX HR220FG) 700-014447-0000 MIL-STD-461F AC input In-line EMI filter (Zhongguang ZGLPG-10-02M) 73-769-002 USB to I2C High Speed Adaptor for PMBus Communication 750-007213-0000 J1501 (20 Pin) Mating connector with 10 Pin header termination for use with 73-769-002 466-003103-0000 Test Heatsink for unit characterization. Size: 331 x 220 x 69 mm; Aluminum with natural finish; Weight = 1.7 kgs PIN 20 PIN 2 PIN 19 PIN 1 PIN 3 300 ± 5 mm A 500±5 (17X) 300±3 B C A F DE 50.0±3 150±3 15±3 M O215±5