LBD101-21-XX LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only BAR DIGIT LED DISPLAY LBD101/21-XX LBD101/21-XX DATA SHEET 13 - Feb. DOC. NO : QW0905- REV. : A DATE : - 2006
1/7PageLBD101/21-XX PART NO. Package Dimensions 1.75(0.069") LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LBD101/21-XX LIGITEK 6.0±0.5 8.0(0.315") ORIENTATION MARK ψ0.45 TYP PINNO.1 22.4(0.882") 25.3(0.996") Note : 1.All dimension are in millimeters and (lnch) tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 5.0 (0.197") 10.1 (0.398") 7.6 (0.299")
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 109876 1114 1315 12 91086 7 LBD101/21-XX Internal Circuit Diagram 17181920 PART NO. 4321 18 171920 42 31 LBD1011-XX LBD1021-XX
- 11. 14. 15. 13. Anode Anode Anode Anode Anode LBD1011-XX Cathode Cathode Cathode Cathode Cathode LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LBD101/21-XX Electrical Connection PIN NO. 17. 16. 19. 20. 18. Anode Anode Anode Anode Anode LBD1021-XX 13. 12. 11. Cathode Cathode Cathode Anode Anode Anode Cathode Cathode Cathode Cathode Cathode 16. 15. 18. 17. Cathode Cathode Cathode Cathode 20. Cathode 19. Cathode Anode Anode Anode Anode Anode Anode Anode14. Cathode 10. 11. 10. PIN NO.
H 40 mW mA mA UNITSymbol IF IFP PD Parameter LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Ratings Absolute Maximum Ratings at Ta=25 ℃ Forward Current Per Chip Power Dissipation Per Chip Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) ℃Topr Tstg -25 ~ +85 -25 ~ +85 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. Part Selection And Application Information(Ratings at 25)℃ Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 ℃ Storage Temperature Operating Temperature μA10Ir Reverse Current Per Any Chip LBD101/21-XX PART NO. Common Anode Common Cathode LBD1021-XX common cathode or anode LBD1011-XX IV-M CHIP PART NO Vf(v)△λ (nm) λP (nm) Electrical Iv(mcd)
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only If=20mA Test Condition If=20mA If=20mA If=10mA voltVf Unit nm μA nm λP Iv mcd Reverse Current Any Chip Spectral Line Half-Width Forward Voltage Per Chip Peak Emission Wavelength Luminous Intensity Per Chip Parameter Test Condition For Each Parameter Symbol Luminous Intensity Matching Ratio IV-M IrVr=5V LBD101/21-XX PART NO.
Relative Intensity@20mA 600 0.0 0.5 Wavelength (nm) 700800900 Ambient Temperature(℃) Fig.5 Relative Intensity vs. Wavelength Fig.3 Forward Voltage vs. Temperature Forward Voltage@20mA Normalize @25℃ 1.0 -20-40 0.8 1.0 0.9 1.1 1.2 0.5 Relative Intensity@20mA Normalize @25℃ -20 Ambient Temperature(℃) 806040200-40 100 0.0 806002040100 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Fig.1 Forward current vs. Forward Voltage Typical Electro-Optical Characteristics Curve 100 Forward Current(mA) 0.1 1.0 1.0 1000 H CHIP Relative Intensity Normalize @20mA Forward Voltage(V) 0.0 1.5 1.0 0.5 2.0 2.5 Forward Current(mA) 101001000 Fig.2 Relative Intensity vs. Forward Current 3.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only 1000 6/7PageLBD101/21-XX PART NO.
MIL-STD-883:1008 JIS C 7021: B-10 MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 JIS C 7021: B-12 Test ConditionTest Item Operating Life Test High Temperature Storage Test Low Temperature Storage Test 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs) 1.Ta=105℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) 1.Ta=-40℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) Reliability Test: This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only The purpose of this is the resistance of the device which is laid under condition of hogh temperature for hours. MIL-STD-202:103B JIS C 7021: B-11 MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test High Temperature High Humidity Test Solder Resistance Test (10min) (10min) 2.total 10 cycles 1.Ta=65℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1secSolderability Test This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. This test intended to see soldering well performed or not. The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. The purpose of this test is the resistance of the device under tropical for hours. The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. LBD101/21-XX PART NO.