ILX34-MBS232 PROSOFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Add-on Instruction creates UDTs, providing logical definitions for I/O, status, and control data Diagnostic data available in RSLogix 5000/Studio 5000 controller tags, allowing decisions to be made based upon node health Module configuration is backed up in the CompactLogix project (ACD file) The serial port can be enabled or disabled through ladder logic Supports up to 1,000 words of data Supports up to 30 Modbus Commands & up to 36 words per command The serial port can be configured as a Modbus Master or Modbus Slave device Suitable for SCADA and field device interface applications
General Specifications - Modbus Master/Slave Specification Description Configuration Environment RSLogix 5000/Studio 5000 Communication parameters Baud Rate: 110 to 38.4K baud Stop Bits: 1 or 2 Data Size: 7 or 8 bits Parity: None, Even, Odd Modbus Modes RTU mode (binary) with CRC-16 ASCII mode with LRC error checking Node Address 1 to 247 Modbus Function Codes Supported 1: Read Coil Status 2: Read Input Status 3: Read Holding Registers 4: Read Input Registers 5: Force (Write) Single Coil 6: Preset (Write) Single Holding Register 8: Diagnostics (Slave Only, Responds to Sub function 00) 15: Force(Write) Multiple Coils 16: Preset (Write) Multiple Holding Registers Hardware Specifications Specification Description Power Supply 10 to 28.8 VDC (Two 24V power supplies needed if using a Series A L16/L18 controller) Pointbus Current 75mA @ 5 VDC Serial Line Voltages RS-232: -15 to +15 VDC RS-422/485: -7 to +12 VDC Number of Inputs 1 Full duplex Module Location 1734-TB or -TBS wiring base assembly (not included) 1734-TOP or -TOPS LED Indicators 1 green/red module status indicator 1 green/red network status indicator 2 green TXD, RXD status indicators Operating Temperature -4°F to +131°F (-20°C to +55°C) Storage Temperature -40°F to +185°F (-40°C to +85°C) Relative Humidity 5% to 95% RH with no condensation Dimensions (H x W x D) 2.21 x 0.47 x 2.97 in 56 x 12 x 75.5 mm Shock 30g peak acceleration (Operational) 50g peak acceleration (Non-operational) Vibration Tested 5g @ 10 to 500 Hz ESD immunity 6kV contact discharges 8kV air discharges Agency Approvals & Certifications Please visit our website: www.prosoft-technology.com Additional Products ProSoft Technology® offers a full complement of hardware and software solutions for a wide variety of industrial communication platforms. For a complete list of products, visit our website at: www.prosoft-technology.com
Ordering Information
To order this product, please use the following: Modbus Serial Communication Module ILX34-MBS232 ILX34-MBS485 To place an order, please contact your local ProSoft Technology distributor. For a list of ProSoft Technology distributors near you, go to: www.prosoft-technology.com and select Where to Buy from the menu. Copyright © 2019 ProSoft Technology, Inc. All Rights Reserved. 1/24/2019