DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • Right Angle Mounting
  • Compatible with IR Reflow Soldering Process
  • Available in a Wide Variety of Colors
  • Available in 8 mm Tape on 178mm (7”) Diameter Reels

Applications

  • LCD backlighting
  • Keypad Side/Backlighting
  • Light Piping
  • Right Angle Indicator Device Selection Guide Part Number Parts per Reel Color HSMA-C680 3000 AlInGaP Amber HSMC-C680 3000 AlInGaP Red HSMG-C680 3000 GaP Green HSMH-C680 3000 AS AlGaAs Red HSML-C680 3000 AlInGaP Orange HSMS-C680 3000 GaP High Efficiency Red, HER HSMY-C680 3000 GaP Yellow CAUTION: HSMx-C680 LEDs are Class 1A ESD sensitive per JESD22-A114C.01 standard. Please observe appro- priate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. POLARITY MARK TO REINFORCE SOLDERING ANODE (CATHODE FOR HSMH-C680) 3.0 1.0 0.3 0.3 1.0 2.0 0.88 0.250.25 R 0.45 CATHODE (ANODE FOR HSMH-C680) 2.0 ANODECATHODE (NON-PIN CONNECTION)

Absolute Maximum Ratings at T A = 25°C Parameter AlInGaP GaP AS AlGaAs Units DC Forward Current 30 25 25 mA Power Dissipation 72 65 65 mW Reverse Voltage (IR = 100mA) 5 5 5 V LED Junction Temperature 95 95 95 °C Operating Temperature Range -40 to 85°C Storage Temperature Range -40 to 85 °C Soldering Temperature See reflow soldering profile (Figure 6 & 7) Electrical Characteristics at T A = 25°C Part Number Forward Voltage VF (Volts) [1] @ IF = 20mA Reverse Breakdown VR (Volts) @ IR = 100mA Thermal Resistance RqJ-P (°C/W) Typ. Max. Typ. Typ. AlInGaP Amber 2.0 2.4 5 500 AlInGaP Red 2.0 2.4 5 500 GaP Green 2.2 2.6 5 300 AS AlGaAs Red 1.8 2.6 5 300 AlInGaP Orange 2.0 2.4 5 500 GaP HER 2.0 2.6 5 300 GaP Yellow 2.1 2.6 5 300 Notes: 1. VF tolerance : ±0.1V Optical Characteristics at T A = 25°C Part Number Luminous Intensity IV [1] (mcd) @ 20mA Color, Dominant Wavelength ld [2] (nm) Typical Color, Peak Wavelength lPeak [(nm) Typical Viewing Angle 2q1/2 [3] (Degrees) TypicalMin. Typ. AlInGaP Amber 28.5 76.9 591 594 115 AlInGaP Red 28.5 62.3 630 643 115 GaP Green 4.5 13.3 573 568 125 AS AlGaAs Red 7.2 30.7 642 657 125 AlInGaP Orange 28.5 108.6 604 611 115 GaP HER 2.8 5.1 621 636 125 GaP Yellow 2.8 9.3 589 588 125 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. q1/2 is the off-axis angle where the luminous intensity is ½ the peak intensity.

Color Bin Limits [1] AlIn GaP Amber Bin ID Dominant Wavelength (nm) Minimum Maximum A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : ±1nm AlInGaP Red Bin ID Dominant Wavelength (nm) Minimum Maximum - 620.0 635.0 Tolerance : ±1nm GaP Green Bin ID Dominant Wavelength (nm) Minimum Maximum A 561.5 564.5 B 564.5 567.5 C 567.5 570.5 D 570.5 573.5 E 573.5 576.5 Tolerance : ± 1nm AS AlGaAs HER Bin ID Dominant Wavelength (nm) Minimum Maximum - 630.0 650.0 Tolerance : ±1nm AlInGaP Orange Bin ID Dominant Wavelength (nm) Minimum Maximum A 597.0 600.0 B 600.0 603.0 C 603.0 606.0 D 606.0 609.0 E 609.0 612.0 F 612.0 615.0 Tolerance : ± 1nm GaP HER Bin ID Dominant Wavelength (nm) Minimum Maximum - 620.0 635.0 Tolerance : ± 1nm GaP Yellow Bin ID Dominant Wavelength (nm) Minimum Maximum A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : ±1nm Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins. Light Intensity (IV) Bin Limits [1] Bin ID Intensity (mcd) Minimum Maximum H 2.80 4.50 J 4.50 7.20 K 7.20 11.20 L 11.20 18.00 M 18.00 28.50 N 28.50 45.00 P 45.00 71.50 Q 71.50 112.50 Tolerance : ±15% Notes: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins.

Refl ow Soldering: For more information on reflow soldering, refer to Ap- plication Note AN-1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30°C @ 60%RH max. Baking is required before mounting, if: 1. Humidity Indicator Card is > 10% when read at 23 ± 5°C. 2. Device expose to factory conditions <30°C/60%RH more than 672 hours Recommended baking condition: 60±5°C for 20 hours. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0481EN - May 26, 2011