HSMX-C660 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Right Angle Mounting
  • Compatible with IR Reflow Soldering Process
  • Available in a Wide Variety of Colors
  • Available in 8 mm Tape on 178 mm (7") Diameter Reels

Applications

  • LCD Backlighting
  • Keypad Side/Backlighting
  • Light Piping
  • Right Angle Indicator Footprint Parts DH AS High (mm) per Reel AlGaAs Efficiency Red Y ellow Green 3.0 x 2.0 x 1.0 3000 HSMH-C660 HSMS-C660 HSMY-C660 HSMG-C660 Package Dimensions HSMx - C660 Right Angle Surface Mount Chip LEDs Data Sheet HSMX-S660 Pkg Dimension C660 POLARITY MARK TO REINFORCE SOLDERING (NON-PIN CONNECTION) ANODE 3.0 1.0 0.3 0.3 1.0 2.0 0.88 0.250.25 R 0.45 CATHODE 2.0 ANODECATHODE

Absolute Maximum Ratings at TA = 25°C Parameter HSMx-C660 Units DC Forward Current[1] 25 mA Power Dissipation 65 mW Reverse Voltage (IR = 100 µA) 5 V Operating Temperature Range –30 to +85 °C Storage Temperature Range[2] –40 to +100 °C Notes: 1. Derate linearly as shown on Figure 4. Optical Characteristics at TA = 25°C Luminous Color Viewing Luminous Intensity Iv Peak Dominant Angle Efficacy (mcd) @ Wavelength Wavelength 2θ 1/2 η v IF = 20 mA λ peak (nm) λ d[1] (nm) (degrees) [2] (lm/W) HSMH-C660 DH AlGaAs 6.3 16.0 650 639 155 80 Red HSMS-C660 High Efficiency 1.6 5.0 639 626 155 145 Red HSMY-C660 Yellow 1.6 5.0 589 586 155 500 HSMG-C660 Green 4.0 9.0 570 572 155 595 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED package. 2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. θ1/2 is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristics at TA = 25°C Forward Reverse Voltage VF Breakdown Capacitance C Thermal (Volts) @ V R (Volts) @ (pF) VF = 0, Resistance IF = 20 mA I R = 100 µA f = 1 MHz Rθ J-PIN (°C/W) HSMH-C660 DH AlGaAs 1.8 2.2 5 4.5 300 Red HSMS-C660 High Efficiency 1.9 2.6 5 4.0 300 Red HSMY-C660 Yellow 2.1 2.6 5 3.0 300 HSMG-C660 Green 2.2 2.6 5 8.0 300

Bin ID Intensity (mcd) Minimum Maximum A 0.11 0.18 B 0.18 0.29 C 0.29 0.45 D 0.45 0.72 E 0.72 1.10 F 1.10 1.80 G 1.80 2.80 H 2.80 4.50 J 4.50 7.20 K 7.20 11.20 L 11.20 18.00 M 18.00 28.50 N 28.50 45.00 P 45.00 71.50 Q 71.50 112.50 R 112.50 180.00 S 180.00 285.00 T 285.00 450.00 Tolerance : ±15% Notes: 1. Bin categories are established for classifi-cation of products. Prod - ucts may not be available in all categories. Please contact your Avago representative for information on current available bins. Light Intensity (Iv) Bin Limits [1]Color Bin Limits (Green) Bin ID Dominant Wavelength (nm) Minimum Maximum A 561.5 564.5 B 564.5 567.5 C 567.5 570.5 D 570.5 573.5 E 573.5 576.5 Tolerance : ± 1nm Color Bin Limits (Y ellow) Bin ID Dominant Wavelength (nm) Minimum Maximum A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : ± 1nm Color Bin Limits (AlGaAs Red) Bin ID Dominant Wavelength (nm) Minimum Maximum - 630.0 650.0 Tolerance : ± 1nm Color Bin Limits (High Efficiency Red) Bin ID Dominant Wavelength (nm) Minimum Maximum - 615.0 630.0 Tolerance : ± 1nm

Figure 12. Tape Leader and Trailer Dimensions. Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries.

  1. Humidity Indicator Card is > 10% when read at 23 ±
  2. Device expose to factory conditions <30°C/60%RH