HSMX-C265 AVAGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- Reverse mountable
- Undiffused optics
- Small 3.4 x 1.25 mm footprint
- Operating temperature range of –30°C to +85°C
- Compatible with IR solder reflow
- Four colors available: red, orange, yellow, and green
- Available in 8 mm tape on 7" (178 mm) diameter reels
Applications
- Keypad backlighting
- Symbol backlighting
- LCD backlighting
- Status indication Device Selection Guide Part Number Color Parts Per Reel HSMS-C265 High Efficiency Red 3000 HSMD-C265 Orange 3000 HSMY-C265 Yellow 3000 HSMG-C265 Green 3000 HSMH-C265 AlGaAs Red 3000 HSMx-C265 Surface Mount Chip LEDs Data Sheet
Notes: 1. All dimensions in millimeters (inches). 3. Polarity of HSMH-C265 will be the opposite of what is shown on above drawing. Absolute Maximum Ratings TA = 25°C Parameter HSMD/G/S/Y-C265 HSMH-C265 Units DC Forward Current[1] 25 25 mA Peak Pulsing Current[2] 100 100 mA Power Dissipation 65 65 mW Reverse Voltage (IR = 100 µA) 5 5 V Led Junction Temperature 95 95 °C Operating Temperature Range –30 to +85 –30 to +85 °C Storage Temperature Range –40 to +85 –40 to +85 °C Soldering Temperature See IR soldering profile (Figure 6) Notes: 1. Derate linearly as shown in Figure 4. 2. Pulse condition of 1/10 duty and 0.1 msec. width. HSMx-C260 Pkg Dimen 3.4 (0.134) 0.3 (0.012) 0.50 ± 0.15 (0.020 ± 0.006) 1.1 (0.043) POLARITY CATHODE MARK 1.1 (0.043) 0.50 ± 0.15 (0.020 ± 0.006) 1.2 (0.047) 1.25 (0.049) LED DIE UNDIFFUSED EPOXY PC BOARD NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ± 0.1 mm UNLIESS OTHERWISE SPECIFIED. SOLDERING TERMINAL R 0.25 (0.01) 0.4 (0.016) GREEN CATHODE MARK (CUM SOLDER MASK) 0.4 (0.016) WHITE SOLDER MASK (THICKNESS = 0.15 (0.006) 0.25 (0.01)
Electrical Characteristics
TA = 25°C Forward Voltage Reverse Breakdown Capacitance Thermal VF (Volts) VR (Volts) C (pF), VF = 0, Resistance @ IF = 20 mA @ IR = 100 µA f = 1 MHz RθJ-PIN (°C/W) HSMS-C265 2.1 2.6 5 8 250 HSMD-C265 2.2 2.6 5 6 250 HSMY-C265 2.1 2.6 5 7 250 HSMG-C265 2.2 2.6 5 6 250 HSMH-C265 1.8 2.6 5 18 300 Optical Characteristics TA = 25°C Luminous Intensity Peak Wavelength Dominant Wavelength Viewing Angle Iv (mcd) @ 20 mA[1] λpeak (nm) λd (nm)[2] 2θ1/2 Degrees[3] HSMS-C265 HER 2.5 10.0 630 626 150 HSMD-C265 Orange 2.5 8.0 605 604 150 HSMY-C265 Yellow 2.5 8.0 589 586 150 HSMG-C265 Green 4.0 15.0 570 572 150 HSMH-C265 AlGaAs 6.3 17.0 660 639 150 Notes: 1. The luminous intensity, Iv, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, λd, is derived from the CIE Chromatically Diagram and represent the perceived color of the device. 3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Figure 1. Relative intensity vs. wavelength.
For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5980-1655E 5980-2435E November 27, 2007