HCT802 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972) 323-2200 Fax (972) 323-2396 Ab so lute Maxi mum Rat ings Power Dis si pa tion (Ts = Substrate that the package is soldered to) Notes (1) This rating is provided as an aid to designers. It is dependent upon mounting material and methods and is not measureable as an outgoing test. Prod uct Bul le tin HCT802 Sep tem ber 1996 Dual En hance ment Mode MOS FET Types HCT802, HCT802TX, HCT802TXV Fea tures

  • 6 pad surface mount package
  • VDS = 90V
  • RDS(on) <5Ω
  • ID(on) N-Channel = 1.5A P-Channel = 1.1A
  • Two devices selected for VDS, ID(on) and RDS(on) similarity
  • Full TX Processing Available
  • Gold plated contacts De scrip tion HCT802 offers an N-Channel and P- Channel MOS transistor in a hermetic ceramic surface mount package. The devices used are similar to industry standards 2N6661 N-Channel device and VP1008 P-Channel device. These two enhancement mode MOSFETS are particularly well matched for VDS, IDS(on), RDS(on) and Gfs. Order HCT802TX for processing per MIL-PRF-19500. Typical screening and lot acceptance tests are provided on page 13-4. TX products receive a VGS HTRB at 16 V for 48 hrs. at 150o C and a VDS HTRB at 72 V for 160 hrs. at 150o C. 15-34

Types HCT802, HCT802TX, HCT802TXV Elec tri cal Char ac ter is tics (TA = 25o C un less speci fied oth er wise) Sym bol Pa rame ters De vice B=Both Min Max Units Test Con di tions BVDSS Drain- Source Break down B 90* V ID = 10 µA*, VGS = 0 VTH Gate Thresh old Volt age N 0.75 2.5 V VGS = VDS, ID = 1 mA P -2.0 -4.5 V ID = -1 mA IGSS Gate- Body Leak age B ±100 nA VGS = ± 20 V, VDS = 0 IDSS Zero Gate Volt age Drain Cur rent B 10* µA VDS = 90 V*, VGS = 0 V B 500* µA Tj = 150o C ID(on) On- State Drain Cur rent N 1.5 A VDS = 25 V, VGS = 10 V P -1.1 A VDS = -15 V, VGS = -10 V RDS(on) Drain- Source on Re sis tance B 5 Ω VGS = 10 V*, ID = 1 A* Gfs For ward Trans con duc tance N 170 mmho VDS = 25 V, ID = 0.5 A P 200 mmho VDS = -10 V, ID = -0.5 A CISS In put Ca paci tance N 70 pf VDS = 25 V, VGS = 0 V, f = 1 MHz P 150 pf VDS = -25 V, VGS = 0 V, f = 1 MHz COSS Com mon Source Out put Ca paci - tance N 40 pf VDS = 25 V, VGS = 0 V, f = 1 MHz P 60 pf VDS = -25 V, VGS = 0 V, f = 1 MHz CRSS Re verse Trans fer Ca paci tance N 10 pf VDS = 25 V, VGS = 0 A, f = 1 MHz P 25 pf VDS = -25 V, VGS = 0 A, f = 1 MHz t(on) Turn- on- time N 15 ns VDD = 25 V, ID = 1 A, RL = 50 Ω P 50 ns VDD = -25 V, ID = -0.5 A, RL = 50 Ω t(off) Turn- off- time N 17 ns VDD = 25 V, ID = 1 A, RL = 50 Ω P 50 ns VDD = -25 V, ID = -0.5 A, RL = 50 Ω * Re verse po lar ity for P- Channel de vice Op tek re serves the right to make changes at any time in or der to im prove de sign and to sup ply the best prod uct pos si ble. Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972)323- 2200 Fax (972)323- 2396 15- 35