GTL432 ETL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

*Precision reference voltage A Rank: 1.24V D0.5% B Rank: 1.24V D1% C Rank: 1.24V D2% *Sink current capability: 200 mA. *Minimum cathode current for regulation: 150ôA. *Equivalent full-range temp coefficient: 30 ppm/:. *Fast turn-on Response. *Low dynamic output impedance: 0.2. *Programmable output voltage to 20V. *Low output noise. Package Dimensions A 4.45 4.7 D 4.44 4.7 S1 1.02 - E 3.30 3.81 b 0.36 0.51 L 12.70 - b1 0.36 0.76 e1 1.150 1.390 C 0.36 0.51 e 2.42 2.66 Typical Application Circuit Block Diagram Symbol L e1 b e SEATIN G PLANE A D C E TO-92

ISSUED DATE :2004/02/23 REVISED DATE :2004/11/25D Absolute Maximum Ratings at Ta = 25:::: Parameter Symbol Ratings Unit Junction Temperature Tj +150 Storage Temperature Tstg -65 ~ +150 Cathode Voltage VKA 20 V Continuous Cathode Current IKA -10~+250 mA Reference Input Current Range IREF -0.05~+10 mA Total Power Dissipation PD 225 mW

Electrical Characteristics

(Ta = 25:,unless otherwise specified.) Parameter Symbol Min Typ. Max. Unit Test Conditions Reference Voltage GTL432C 1.215 1.24 1.265 GTL432B 1.228 1.24 1.252 GTL432A VREF 1.234 1.24 1.246 V VKA= VREF , IK=10mA (Fig.1) Deviation of reference Input Voltage Over temperature(note1) VREF/T - 3.0 20 mV VKA= VREF , IK=10mA Ta=Full range (Fig.1) Ratio of Change in Reference Input Voltage to the Change in Cathode Voltage VREF/ VKA - -1.4 -2.0 mV/V IK=10mA (Fig.2) VKA=20V~VREF Reference Input Current IREF - 1.4 3.5 uA IK=10mA,R1=10K,R2= (Fig.2) Deviation of reference Input Current Over Temperature Range ØIREF - 0.4 1.2 uA IK=10mA,R1=10K,R2= Ta=Full range(Fig.2) Minimum Cathode Current for Regulation IKA(min) - 0.15 0.3 mA VKA=VREF(Fig.1) Off-State Cathode Current IKA(off) - 0.1 1.0 uA VKA=20V,VREF=0 (Fig.3) Dynamic Output Impedance (note2) ‡ZkA - 0.2 0.5 VKA=VREF, IK=1 ~100mA F1.0KHz(Fig.1) Note1. Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference over the full temperature range. The average temperature coefficient of the reference input voltage Ø VREF is defined as: Where: T2 – T1 = full temperature change. Ø VREF can be positive or negative depending on whether the slope is positive or negative. Note2. The dynamic output impedance, RZ, is defined as:

ISSUED DATE :2004/02/23 REVISED DATE :2004/11/25D When the device is programmed with two external resistors R1 and R2 (see figure 2.), the dynamic output impedance of the overall circuit, is defined as: Test Circuits Typical Performance Characteristics

ISSUED DATE :2004/02/23 REVISED DATE :2004/11/25D

ISSUED DATE :2004/02/23 REVISED DATE :2004/11/25D Application Examples Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165