DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Complies with the IEEE-488.2 standard As the board complies with the IEEE-488.2 standard, you can control any external device that supports this standard. Data transfer speed 1.5Mbyte/sec max. The maximum data transfer speed for communications is 1.5Mbyte/sec. Supports bus master operation The bus master data transfer function enables large quantities of data to be transferred between the board and PC without loading the CPU. Internal 2Kbyte FIFO buffers for send and receive The board has separate 2Kbyte FIFO buffers for sending and receiving data, allowing both small and large volumes of data to be transferred at high speed. Interface messages also use a FIFO to enable high-speed transmission. Built-in GPIB bus analyzer function [only GPIB-F-LPE] The board features a bus analyzer function. This not only allows the signals on the GPIB bus to analyzed, but also permits signal analysis to be performed while this product is performing GPIB communications Built-in SPAS event function In addition to the functions of the earlier GPIB controller (µPD7210), the board also supports the SPAS event generated when a serial poll occurs. This gives you a high level of flexibility in constructing your system. Internal high-precision timer The board includes a high-precision application timer to allow accurate time monitoring to be performed under Windows. Long term availability As the board uses a high-speed GPIB controller developed by CONTEC (compatible with the µPD7210 register), reliable long term availability is ensured. Diagnosis program A diagnosis program is supplied to support system development. The diagnostic program can be used to check hardware operation (interrupts and I/O addresses) and to perform simple communication tests with connected devices. Other Supports both Low Profile size slots and standard size slots (use the supplied bracket as an adaptor). Specifications Item GPIB-F-LPE GPIB-FL-LPE GPIB Number of channel 1 channel Conforms to IEEE-488.1, 488.2(GPIB) standards Transfer format 8-bit parallel, 3-wire handshake system Transfer rate 1.5Mbyte/sec Data buffer size 2Kbyte send, 2Kbyte receive Signal logic Negative logic L level : 0.8V or less, H level : 2.0V or more Cable length between device 4m or less Total cable length 20m or less Connectable number of device 15 devices Analyzer buffer size 64K data points (1 data point : Control signals + DIO1 - 8) None Bus master section DMA channels 2 channels Transfer bus width 32-bit Transfer data length 8 PCI Words length (Max.) Transfer rate 80Mbyte/sec Scatter/Gather function 64Mbyte/ch Common section I/O address Any 128-byte boundary Interrupt 1 level use Consumed current (Max.) 3.3VDC 600mA Operating conditions 0 - 50°C, 10 - 90%RH (No condensation) Bus specification PCI Express Base Specification Rev. 1.0a x1 External dimensions (mm) 121.69(L) x 67.90(H) Connector used Micro ribbon connector (24-pin) 5555139-1 [made by AMP] or equivalent Weight 80g Board Dimensions [mm] 121.69(L) 67.90(H) The standard outside dimension (L) is the distance from the end of the board to the outer surface of the slot cover.

Ver.1.13 GPIB-F-LPE, GPIB-FL-LPE 2 Support Software NOTE: This hardware does not support Windows 95, Windows 98 and Windows NT 4.0/3.51. Driver Library API-PAC(W32) [Bundled] API-PAC(W32) is the library software that provides the commands for CONTEC hardware products in the form of Windows standard Win32 API functions (DLL). It makes it easy to create high-speed application software taking advantage of the CONTEC hardware using various programming languages that support Win32 API functions, such as Visual Basic and Visual C++. It can also be used by the installed diagnosis program to check hardware operations. For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site. API-GPLV(W32) library supporting LabVIEW [Stored on the bundledmedia driver library API-PAC(W32)] API-GPLV(W32) is a driver created according to the National Instruments Corporation’s GPIB function style. The driver is software to control the CONTEC GPIB board (PC Cards) using a LabVIEW-based GPIB system or existing application program. It can also be used by the installed diagnosis program to check hardware operations. CONTEC provides download services For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site. Linux version of general-purpose count driver: API-GPIB(LNX) [Stored on the bundledmedia driver library API-PAC(W32)] This driver is used to control CONTEC GPIB boards (PC Cards) from within Linux. You can control CONTEC GPIB boards easily using the shared library called from the user application, the device driver (module) for each kernel version, and the board (PC Cards) configuration program (config). CONTEC provides download services For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site. Cable & Connector Cable (Option) GPIB cable (2m) : PCN-T02 GPIB cable (4m) : PCN-T04 GPIB Connector : CN-GP/C *1*2 *1 Effective when the cable being plugged into the board interfere with the PC’s main unit. *2 The GPIB connector adapter [CN-GP/C] is bundled with this product as a standard feature. * Check the CONTEC’s Web site for more information on these options. Packing List Board [GPIB-F-LPE, or GPIB-FL-LPE] …1 First step guide … 1 Disk *1 [API-PAC(W32)] …1 GPIB connector adapter [CN-GP/C] …1 Product Registration Card & Warranty Certificate …1 Serial number label …1 *1 The Disk contains the driver software and User’s Guide Connector Pin Assignment Management bus(End or Identify) (Data Valid) (Not Ready for Data) (Not Data Accepted) (Interface Clear) (Service Request) (Attention) (Ground) Data bus DIO1 Data bus DIO2 Data bus DIO3 Data bus DIO4 EOI DAV NRFD NDAC IFC SRQ ATN GND CN1 Handshake bus DIO5 Data bus DIO6 Data bus DIO7 Data bus DIO8 Data bus REN(Remote Enable)Management bus GND (Ground) GND (Ground) GND (Ground) GND (Ground) GND (Ground) GND (Ground) Logic GND Management bus