DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Wide Bandwidth Gain Amplifier Function is installed. This product has equipped eight differential gain amplifiers. These amplifiers have a wide bandwidth, from DC - 100kHz, when the input gain is 1. These amplifiers can achieve up to 500 times signal gain. The low-pass filter of each channel is installed. For each input channel, an onboard 4th order lower Butterworth filter can be applied. By changing jumpers, cutoff frequency of the filter can be selected: either a 20Hz cutoff frequency or a 10kHz one. A 20Hz cutoff frequency is useful when the commercial power noise is a main problem of the input signal; a 10kHz cutoff frequency is normally used for an Anti- Aliasing Filter application. The temperature sensor that can be used for Hiyasetten amends of the thermo-couple is installed. This product has equipped a semiconductor temperature sensor. User can use this sensor to get the board temperature. This temperature signal can be used to compensate thermocouple output by software when a thermocouple signal is applied. Easy connection to external signal with M3 screw type terminal blocks. There are eight M3 screw type terminal blocks for analog input signal. It is also equipped a M3 screw type terminal block for analog output signal of analog E-series boards. It is very easy for external connection with the ATLF-8A terminal board. In addition, a D type connector which is same as differential input connector of analog E-series boards. Other Features - Easy to connect with the analog E series board through a PCB37P, PCB37PS Series (option). - Up to this two products can be cascaded together to supply up to 16 input channels. - Either PC power (via CN1) or an external power source can be used to supply power to this product. - This product can be installed on the DIN rail using the optional DIN rail installation adapter (DIN-ADP1). Packing List Accessory Board [ATLF-8A]…1 Power supply connector (MC1,5/3-ST-3,5)…1 User’s Manual…1 Specifications Specifications Item Specifications Number of input channel Differential input 8 channels Input voltage range (Max.) -10V - +10V Input gain (Jumper setting) Gain = 1, Gain = 10 (Adjusting is required), Gain = 100 (Adjusting is required), Gain = 200 - 500 (Adjusting is required) Input impedance 1MΩ or more Accuracy Gain = 1 ±0.05%, Gain = 10 ±0.05%, Gain = 100 ±0.05% *1, Band width 100kHz (Gain=1) Filter type 4th order Butterworth filter Cutoff frequency (jumper select) 20Hz, 10kHz Temperature sensor’s accuracy ±2ºC Warm-up time 15 minutes or more Current consumption (mm) 5VDC 700mA Operating condition 0 - 50ºC, 20 - 90%RH (No condensation) External dimension (mm) 105(W) x 230(D) x 25.5(H) Weight 350g Supported board Board for PCI Express AIO-161601UE3-PE, AIO-161601E3-PE, AIO-121601UE3-PE, AIO-121601E3-PE Board for PCI AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV, AD12-16(PCI)E, AD16-16(PCI)E, AD12-16U(PCI)EH, AD16-16U(PCI)EH Board for ISA AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH, AD16-16U(PC)EH *1 The accuracy that the 20Hz Lowpass filter is applied. Terminal (CH0 - CH7, TB1, TB2) Specifications Interface Connector (CN1 - CN3) Specifications Used connector 37-pin D-SUB connector [F (female) type] DC-37ST-N [mfd. by JAE] equivalent Lock nut Screw size #4-40UNC GM-25HU [mfd. by HONDA] equivalent Compatible connector 37-pin D-SUB connector [M (male) type] (DCSP-JB37PF [mfd. by JAE] equivalent), (747306-1[mfd. by AMP] equivalent), etc It connects with the thermo-couple from the terminal stand on ATLF-8A. Connection Example 1 ATLF-8A PCB37P PCB37PS Series ThermocouplePersonal Computer PCB37P PCB37PS Series Connection Example 2 ATLF-8A ATLF-8A Voltage Signal /Current Signal Voltage Signal /Current Signal Connect ATLF-8A with an external equipment in cascade connection. Used terminal 5.6 11.1 15.8 3.2 7.62 6.2 Compatible Y pin C3A [mfd. by J.S.T.] equivalent Pin screw M3 ML-40S1BYF [mfd. by Sato Parts] equivalent Terminal block dimension [mm] Y pin dimension [mm]
Ver.1.01 ATLF-8A 2 Physical Dimensions Shielded Cable with Two 37-pin D-SUB Connectors (Mold Type) : PCB37PS-0.5P (0.5m), PCB37PS-1.5P (1.5m) Flat Cable with Two 37-pin D-SUB Connectors : PCB37P-1.5 (1.5m) Physical Dimensions DIN rail adapter : DIN-ADP1 * Check the CONTEC’s Web site for more information on these options. Physical Dimensions AO AGND VR13 VR14 VR15 CN3 +IN -IN AGND +IN -IN AGND +IN -IN AGND +IN -IN AGND +IN -IN AGND +IN -IN AGND +IN -IN AGND +IN -IN AGND TB2 +6V GND CN1 CN2 VR12 VR11 VR10 VR9VR1 VR3 VR2 VR4 VR5 VR6 VR7 VR16VR8 105 727 230 8 - φ3.5 7 JP35 JP34 JP31 JP30 JP18 JP19 JP14 JP15 JP27 JP27 JP26 JP10 JP11 JP16 JP33 JP33 JP33 JP17 JP20JP4 JP21 JP32 JP24 JP28 JP8 JP12 JP1 277 JP2 JP3 CH0 TB1 CH4 CH1 CH5 CH2 CH6 CH3 CH7 JP5JP9JP13 JP25JP29 JP6 JP7 JP23 JP22 14.5 25.5 [mm]