E3P2G48D25 TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

© 2022 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com 1 E3P2G\\022022 E3P2G Series Three-Phase Output up to 75A, 600 Vac DC Control Solid-State Relay E3P2G 48 D -1675 Part Number Explanation NOTES 1) Line Voltage (nominal): 48 = 480 Vac 2) Switch Type: D = Zero-cross turn-on 3) Output Current: 25 = 25Amps, 50 = 50 Amps 75 = 75Amps 4) Features: -16 = RC+VDR Part Number Description E3P2G48D25 25A, 600 Vac E3P2G48D50 50A, 600 Vac E3P2G48D75 75A, 600 Vac E3P2G48D75-16 75A, 520 Vac Figure 1 — Outline dimensions in inches (mm) Housing Material — PA 6 UL94VO Base Plate — Tin plated Aluminum FEATURES / BENEFITS

  • Three-phase power output
  • Direct Copper Bonding
  • Internal Over-Voltage protection
  • Input Control LED
  • Built in IP20 protection with flaps
  • Excellent thermal performance
  • Designed too IEC/ EN60947-4-3.
  • High immunity to surges

DESCRIPTION

The E3P2G series, three-phase solid state relay is the 2nd generation of the discontinued E3P series. The new design incorporates a high efficiency back-to-back thyristor with direct copper bonding for a longer lifetime expectancy. Over-Voltage protection is provided internally with TVS diodes for the input and output. Additionally our -16 model is designed with an RC snubber and VDR for greater protection to the output to handle all types of loads. The industrial SSR utilizes optical isolation to protect the control from load transients for each phase and has tight zero-cross window for low EMI. A control status LED are standard on all models.

APPLICATIONS

  • Heating control
  • Motor control
  • Uninterruptible power supplies
  • Light dimmers
  • Three-phase industrial and process control
  • On/Off controls of AC equipment APPROVALS Conformity to IEC947-4-3 UL Pending Mechanical Specification

2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2022 TELEDYNE RELAYS

E3P2G\\022022 E3P2G Series Three-Phase Output up to 75A, 600 Vac DC Control Solid-State Relay OUTPUT (LOAD) SPECIFICATION Min Typ. Max Units Operating Voltage Range (+/- 10%) E3P2G48DXX 24 400 600 Vrms E3P2G48D75-16 24 400 520 Vrms Peak Voltage E3P2G48D25 1200 Vpeak E3P2G48D50 1200 Vpeak E3P2G48D75 1200 Vpeak E3P2G48D75-16 1600 Vpeak Latching Voltage All relays 10 V Load Current Range (@40 °C)1 25A output current .005 25 Arms 50A output current .005 42 50 Arms 75A output current .005 54 75 Arms Non-Repetitive Overload Current (tp=10ms) 25A output 320 420 A 50A output 700 750 A 75A output 1100 1200 A On-State Voltage Drop (@ 25°C) E3P2G48D25 0.85 V All other relays 1 V On State Dynamic Resistance 25A output 9.5 mΩ 50A output 7.5 mΩ 75A output 4.5 mΩ Zero-Cross Window E3P2G48D25 35 V E3P2G48D50 30 V E3P2G48D75-XX 10 V INPUT (CONTROL) SPECIFICATION Min Typ. Max Units Control Voltage 4 30 Vdc Control Current 25 mA Must Turn-Off Voltage 2 Vdc Input Resistance Current Regulator Ω Reverse Voltage Protection 30 V Figure 2 — Wiring Diagram Typical Application CONTROL CHARACTERISTIC Input Current (mA) Control Voltage (Vdc)

4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2022 TELEDYNE RELAYS

E3P2G\\022022 E3P2G Series Three-Phase Output up to 75A, 600 Vac DC Control Solid-State Relay THERMAL CHARACTERISTICS Figure 5b — 50A output Figure 5c — 75A output Figure 5a — 25A output RMS Load Current (A)RMS Load Current (A) RMS Load Current (A) Ambient Temperature (°C) Ambient Temperature (°C) Ambient Temperature (°C)

6 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2022 TELEDYNE RELAYS

E3P2G\\022022 E3P2G Series Three-Phase Output up to 75A, 600 Vac DC Control Solid-State Relay CONNECTIONS SOLID (No ferrule) FINE STRANDED (With ferrule) SOLID (No ferrule) FINE STRANDED (With ferrule) POZIDRIV 2 AWG18 -- AWG14 0.75 -- 2.5 mm² AWG18 -- AWG14 0.75 -- 2.5 mm² AWG18 -- AWG14 0.75 -- 2.5 mm² AWG18 -- AWG14 0.75 -- 2.5 mm² Recommended tightening torque for M4 screw: Min 1.2 / Typ 1.5 / Max 2 N.M SOLID (No ferrule) FINE STRANDED (With ferrule) SOLID (No ferrule) FINE STRANDED (With ferrule) POZIDRIV 2 AWG16 -- AWG8 1.5 -- 10 mm² AWG16 -- AWG8 1.5 -- 10 mm² AWG16 -- AWG8 1.5 -- 10 mm² AWG16 -- AWG8 1.5 -- 10 mm² Recommended tightening torque for M5 screw: Min 2 / Typ 2.4 / Max 3 N.M Flaps are delivered mounted on the relay. Marking labels are available for mounting on flaps. W max =12.6mm AWG6 (16 mm²) AWG4 (25 mm²) AWG2 /AWG3 (35mm²) AWG0 /AWG1 (50mm²) Power with ring terminal Control Wiring Power Wiring IP20 flaps Number of wires Screwdriver type 1 2 Number of wires Screwdriver type 1 2 #Teledyne Confidential; Commercially Sensitive Business Data Direct connection with wires with or without ferrules With ring terminals