DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Ver.1.01 DIO-1616TB-PE 2 Item Specification Input Input format Opto-isolated TTL level input (Negative logic *1) Number of input signal channels 16ch (all available for interrupts) (1 common) Input resistance 1.1k Interrupt 16 interrupt input signals are arranged into a single output of interrupt signal INTA. An interrupt is generated at the rising edge (HIGH-to-LOW transition) or falling edge (LOW-to-HIGH transition). Response time Within 1sec Output Output format Opto-isolated TTL level output (Negative logic *1) Number of output signal channels 16ch (1 common) Output rating Output voltage 5VDC (Max.) Output current Average 6.4mA (par channel) (4 TTL loads ) Response time Within 1sec Common Built-in power 5VDC 600mA *2 Allowable distance of signal extension Approx. 5m (depending on wiring environment) I/O address Any 32-byte boundary Interruption level 1 level use Max. board count for connection 16 boards including the master board Isolated Power 500Vrms External circuit power supply 5VDC (±10%) Power consumption (Max.) When using the internal power supply : 3.3 VDC 550mA, 12VDC 350mA When using the external power supply : 3.3VDC 550mA Operating condition 0 - 50°C, 10 - 90%RH (No condensation) Bus specification PCI Express Base Specification Rev. 1.0a x1 Dimension (mm) 169.33(L) x 110.18(H) Connector 37 pin D-SUB connector [F (female) type] DCLC-J37SAF-20L9E [mfd by JAE] or equivalent to it Weight 140g *1:Data “0” and “1” correspond to the High and Low levels, respectively. *2 :When using the internal power supply, the input section consumes a maximum of 51mA and the output channel switching section consumes a maximum of 105.6mA. In this case, therefore, the output current to be supplied from the board is 443.4mA. Board Dimensions [mm] 169.33(L) 110.18(H) d to the outer surface of the slot cover. the distance from the end of the boar The standard outside dimension (L) is API-DIO(WDM)/API-DIO(98/PC) Digital I/O driver for Windows [Stored on the bundled CD-ROM driver library API-PAC(W32)] The API -DIO(98/PC) is the Windows version driver library software that provides products in the form of Win32 API functions (DLL). Various sample pr ogramms such as Visual Basic and Visual C++, etc and diagnostic program useful for checking operation is provided. < Operating Environments > OS: Windows Vista, Windows XP, Server 2003, 2000 Adaptation language: Visual Basic , Visual C++ , Visual C# , Delphi, C++ Builder Upgraded software versions can be downloaded from CONTEC’s document site (http://www.contec.com/apipac/) API-DIO(LNX) Digital I/O driver for Linux [Stored on the bundled CD-ROM driver library API-PAC(W32)] The API -DIO(LNX) is the Linux version driver software which provides device drivers (modules ) by shared library and kernel version. Various sample programs of gcc are provided. < Operating Environments > OS: RedHatLinux, TurboLinux (For details on supported distributions, refer to Help files that are available after installation.) Adaptation language: gcc Upgraded software versions can be downloaded from CONTEC’s document site (http://www.contec.com/apipac/). VI-DAQ Data acquisition VI library for LabVIEW [Available for free download from CONTEC’s web site] CONTEC’s VI library is for use with National Instruments ’ LabVIEW. VI-DAQ is designed with functions similar to that of LabVIEW's Data Acquisition VI, allowing various devices to be used without complicated settings. For more details and to download VI -DAQ go to http://www.contec.com/vidaq/. Specifications Support Software
Ver.1.01 DIO-1616TB-PE 3 Flat Cable with Two 37-pin D- SUB Connectors : PCB37P-1.5 (1.5m) : PCB37P-3 (3m) Flat Cable with Two 37-pin D- SUB Connectors :PCB37P-1.5 (1.5m) : PCB37P-3 (3m) : PCB37P-5 (5m) Shielded Cable with Two 37-pin D- SUB Connectors :PCB37PS-0.5P (0.5m) : PCB37PS-1.5P (1.5m) : PCB37PS-3P (3m) : PCB37PS-5P (5m) Flat Cable with One 37-pin D- SUB Connector : PCA37P-1.5 (1.5m) : PCA37P-3 (3m) : PCA37P-5 (5m) Shielded Cable with One 37-pin D- SUB Connector : PCA37PS-0.5P (0.5m) : PCA37PS-1.5P (1.5m) : PCA37PS-3P (3m) : PCA37PS-5P (5m) 37-pin D-SUB Male Connector Set (5 Pieces) : CN5-D37M : PCB37P-5 (5m) Screw Terminal (M3 x 37P) : EPD-37A *1 Screw Terminal (M3.5 x 37P) : EPD-37 *1 General Purpose Terminal : DTP-3A *1 Screw Terminal : DTP-4A *1 Signal Monitor for Digital I/O : CM-32(PC)E *1 *1 A PCB37P or PCB37PS optional cable is required separately. Connector shape The on-board interface connector (CN1) is used when connecting this product and the external devices. CN1 36 18 21 2 - Connector used 37-pin D-SUB connector [F(female)type] DCLC-J37SAF-20L9E [mfd by JAE] or equivalent to it Lock nut UNC #4-40 (inch screws) - Applicable connector 17JE-23370-02(D8C)-CG [mfd by DDK, M(male)type] FDCD-37P(55) [mfd by HIROSE, M(male)type] DC-37P-NR [mfd by JAE, M(male)type] Interface connector (CN1) Connector Pin Assignment Pin Assignments of Interface Connector (CN1) N.C. Vcc I-17 I-16 I-15 I-14 I-13 I-12 I-11 I-10 I-07 I-06 I-05 I-04 I-03 I-02 I-01 I-00 GND Vcc O-37 O-36 O-35 O-34 O-33 O-32 O-31 O-30 O-27 O-26 O-25 O-24 O-23 O-22 O-21 O-20 GND +5V+5V Signal common +0 port (input) +1 port (input) +2 port (output) +3 port (output) Signal common I-00 - I-17 can be used as interrupt signal. * The numbers in square brackets [ ] are pin numbers designated by HONDA TSUSHIN KOGYO CO., LTD. I-00 - I-17 16 input signal pins. Connect output signals from the external device to these pins. O-20 - O-37 16 output signal pins. Connect these pins to the input signal pins of the external device. Vcc When using the internal power supply, output +5V. When using the external power supply, connect these pins to the positive side. GND When u sing the internal power supply, output GND. When using the external power supply, connect these pins to the negative side. N.C. This pin is left unconnected. Optional Cables and Connectors Accessories On-board connector wiring
Ver.1.01 DIO-1616TB-PE 4 The external digital signal given to the signal input section is TTL level and each input signal is taken into the PC side by negative logic. Input Circuit Input pin ISO/5V Vcc GND GND Vcc Plus Common External circuitBoard JP5 GND Vcc JP4 ISO/GND Minus CommonOpto-coupler * Input pin represents I-xx. The input circuits of interface blocks of this product are illustrated above. The signal inputs are isolated by opto-couplers. T his product therefore requires the on-board internal power supply or the external 5VDC power supply to drive the input section of this product. When you are using the external power supply, 4.5mA current is requested each channel. CAUTION Please refer to “Selecting Power Supply” and then connect the jumper in accordance with the power supply to be used. Connecting a Switch GND (CN1 : 1 pin) Board I-00 (CN1 : 2 pin) Switch When the switch is ON, the corresponding bit contains 1. When the switch is OFF , by contrast, the bit contains 0. The signal output section is TTL dri ver output and each output signal is sent to an external device as negative logic. Output Circuit Opto-coupler ISO/5V GND Vcc JP2 Minus Common ISO/GND JP3 Vcc GND Output Pin External circuitBoard Vcc Plus Common * Output pin represents O-xx. The output circuits of interface blocks of th is product are illustrated above. The signal outputs are TTL level signals isolated by opto-couplers. This product therefore requires the on-board internal power supply or the external 5VDC power supply to drive the output section of this product. CAUTION - The Opto -coupler used on this board, with power turned, feeds low-level output when the primary circuit is not driven. - Using the external power supply: The Opto -coupler keeps on outputting low -level while the external power supply is turned on and the PC is off. - Using the internal power supply: Since the internal power supply ISO/5V is enabled earlier than the PC’s Vcc, the opto-coupler outputs the low level for several ms while the PC is off or before the PC is turned on. - Please refer to “Selecting Power Supply” and then connect the jumper in accordance with the power supply to be used. Connection to the LED O-20 (CN1 : 21 pin) LED 2k Vcc (CN1 : 37 pin) Board side When “1” is output to a relevant bit, the corresponding LED comes on. When “0” is output to the bit, in contrast, the LED goes out. Connection of Input Signals Connection of Output Signals
Ver.1.01 DIO-1616TB-PE 5 PCI Express bus DIO-1616TB-PE Opto- coupler Control Circuits Interrupt Control Circuit External digital input port 0 (8ch, Group 0) External digital input port 1 (8ch, Group 1) External digital output port 0 (8ch, Group 2) External digital output port 1 (8ch, Group 3) Opto- coupler Opto- coupler Opto- coupler Block Diagrams