DH24D25 TELEDYNE | Alldatasheet
Document overview
- Manufacturer or author: mdroberts
- PDF pages: 6
Technical content
© 2014 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com DH Page 1 DH\\032014\\Q1 Series DH Output to 35A, 600 Vac (slimpac) Solid-State Relays FEATURES/BENEFITS
- New High Effi ciency Back-to-Back Thyristors for long lifetime expectancy
- Zero-cross models designed for resistive loads
- Input protection and control LED standard
- IP20 protective plastic cover
- Designed in conformity with EN60947-4-3 (IEC947-4-3) and EN60950/VDE0805 (Reinforced Insulation) Part No. Load Voltage Load Current Control Voltage Switch Type DH24D25 12-280 V ac 25A 3-32 Vdc Zero Cross DH48D35 24-600 Vac 35A 3.5-32 Vdc Zero Cross ELECTRICAL SPECIFICATIONS (+25°C ambient temperature unless otherwise specifi ed) INPUT (CONTROL) SPECIFICATIONS Min Max Units Input Voltage Range DH24 3 32 V DH48 3.5 32 V Input Current Range All Relays 14 mA Must Turn-Off Voltage 2.0 Vdc Reverse Voltage Protection (D) 32 V Clamping Voltage (D) 36 V Input Immunity (EN61000-4-4) 2 kV Input Immunity (EN61000-4-5) 2 kV TYPICAL APPLICATION NOTES 1) Line Voltage (nominal): 24 = 240 Vac; 48 = 480 Vac 2) Switch Type: D = Zero-cross turn-on CONTROL CHARACTERISTICS Figure 1 0 2 4 6 8 1 01 21 41 61 82 02 22 42 62 83 03 20 CONTROL VOLTAGE (Vdc) CONTROL CURRENT (mA) LOAD Line Voltage
DH Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2014 TELEDYNE RELAYS DH\\032014\\Q1 Series DH Output to 35A, 600 Vac (slimpac) Solid-State Relays ELECTRICAL SPECIFICATIONS (+25°C ambient temperature unless otherwise specifi ed) OUTPUT (LOAD) SPECIFICATIONS Min Max Units Operating Range DH24 12 280 Vac DH48 12 600 Vac Peak Voltage (VDR Clamping) DH24 600 Vpeak DH48 1200 Vpeak Load Currrent Range (Resistive) 25 output current .005 25 Arms 35 output current .005 35 Arms Maximum Surge Current Rating (Non-Repetitive) 25 output current 250 A 35 output current 420 A On-State Voltage Drop 0.85 V Output Power Dissipation (Max) 25 output current 0.9 x 0.85 x I + 0.016 x I 2 W 35 output current 0.9 x 0.85 x I + 0.0095 x I 2 W Zero-Cross Window (Typical) ±20 Vac Off-State Leakage Current 1 mA Turn-On Time (60 Hz) 8.3 ms Turn-Off Time (60 Hz) 8.3 ms ELECTRICAL SPECIFICATIONS (continued) (+25°C ambient temperature unless otherwise specifi ed) OUTPUT (LOAD) SPECIFICATIONS Min Max Units Off-State dv/dt 500 V/ μs Maximum di/dt (Non-Repetitive) 50 A/ μs Operating Frequency 0.1 800 Hz I2t for fuse matching (<10ms) 25 output current 340 A 2s 35 output current 882 A 2s Junction-Case Thermal Resistance 25 output current 1.8 °C/W 35 output current 0.9 °C/W Conducted Immunity Level IEC/EN61000-4-4 (bursts) All Relays 2kV criterion A IEC/EN61000-4-5 (surge) All Relays 2kV criterion B 2kV criterion A on -16 models
© 2014 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com DH Page 3 DH\\032014\\Q1 Series DH Output to 35A, 600 Vac (slimpac) Solid-State Relays GENERAL SPECIFICATIONS (+25°C ambient temperature unless otherwise specifi ed) ENVIRONMENTAL SPECIFICATIONS Min Max Units Operating Temperature –40 +80 °C Storage Temperature –55 +125 °C Ambient Humidity 40 to 85 % Input-Output Isolation 4000 Vrms Output-Case Isolation 4000 Vrms Insulation Resistance @500Vdc 1000 M Ω Rated Impulse Voltage 4000 V Vibration (10–55 Hz according to CE168) 1.5 mm Shock (according to CD168) 30 g Housing Material PA6 UL94V0 Baseplate Aluminum Figure 3 MECHANICAL SPECIFICATION 2/T11/L1 A1/+ A2/- LED fixation .89 (22.5) .31 (8) 1.87 (47.6) 3.58 (91) 1.65 (42) Dimensions in inches (mm) Weight: 3 oz. (85 g)
DH Page 6 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2014 TELEDYNE RELAYS DH\\032014\\Q1 Series DH Output to 35A, 600 Vac (slimpac) Solid-State Relays CONTROL WIRING Number of Wires Screwdriver T ype Recommended Torque N.m Solid (no ferrule) Fine Stranded (with ferrule) Solid (no ferrule) Fine Stranded (with ferrule) AWG18…AWG14 AWG18…AWG14 AWG18…AWG14 AWG18…AWG14 Pozidriv 2 1.2 POWER WIRING Number of Wires Screwdriver T ype Recommended Torque N.m Solid (no ferrule) Fine Stranded (with ferrule) Solid (no ferrule) Fine Stranded (with ferrule) AWG16…AWG8 AWG16… AWG10 AWG16…AWG8 AWG16… AWG10 Pozidriv 2 2 0.33 (8.5)